MAXIMA ULTRA 36

Professionaalsed elektromehaanilised tõkkepostid

Kataloog (PDF)

Professionaalsed elektromehaanilised tõkkepostid

Varustatud U-Link protokolliga, mis võimaldab ühendada Parkimishaldus- või Hoonehaldussüsteemiga. Professional electromechanical barrier with inverter technology and three-phase asynchronous motor for high frequency of use, developed and designed for a wide range of operating conditions such as large car parks or motorway toll booths with frequent inversions of movement. Can control access points from 2 to 6 metres wide with fully accessorised barrier in a single model. Mechanical crankshaft movement which can deliver fluidity of movement of the bar and control its soft opening and closing. Oil bath gearbox unit. Easier access thanks to the dual entrance. Cap with RGB lights (optional) with traffic light function, available parking spaces and self-diagnostics.

Professionaalsed elektromehaanilised tõkkepostid

Toodete loetelu

    230 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with spring. Colour RAL 7015.

      230 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with spring. Stainless steel barrier body.

        230 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with spring. Special RAL colour.

          230 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with strong spring. Colour RAL 7015.

            230 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with strong spring. Stainless steel barrier body.

              230 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with strong spring. Special RAL colour.

                120 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with spring. Colour RAL 7015.

                  120 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with spring. Stainless steel barrier body.

                    120 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with spring. Special RAL colour.

                      120 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with strong spring. Colour RAL 7015.

                        120 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with strong spring. Stainless steel barrier body.

                          120 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with strong spring. Special RAL colour.

                          Tarvikud

                          Crown MAXIMA U36
                          P940095 00000

                          Pealis ilma tuledeta Maxima Ultra 36 jaoks.

                          Crown RGB MAXIMA U36
                          P940095 00003

                          Cap with RGB lights for Maxima Ultra 36. Functions: flashing, traffic light, diagnostics.

                          Crown MAXIMA U36 INOX
                          P940095 00200

                          Pealis ilma tuledeta Maxima Ultra 36 INOX jaoks.

                          Crown RGB MAXIMA U36 INOX
                          P940095 00203

                          Pealis RGB-tuledega roostevabast terasest Maxima Ultra 36 jaoks. Funktsioonid: vilkumine, foor, diagnostika.

                          Crown MAXIMA U36 RAL
                          P940095 00100

                          Pealis ilma tuledeta Maxima Ultra 36 jaoks. Kohandatud RAL

                          Crown RGB MAXIMA U36 RAL
                          P940095 00103

                          Cap with RGB lights for Maxima Ultra 36. Custom RAL. Functions: flashing, traffic light, diagnostics.

                          DIMA PRO36
                          P120088

                          Vundamendimallid ja klambrid Maxima Ultra 36 tõkkepuude paigaldamiseks.

                          BOOM PS30
                          P120087 00001

                          Alumiiniumist latt, ava L = 3 m, punaste helkuritega. Sisaldab kummi ja ülemist optilist hajutit. Välja arvatud tuled.

                          BOOM PS40
                          P120087 00002

                          Alumiiniumist latt, ava L = 4 m, punaste helkuritega. Sisaldab kummi ja ülemist optilist hajutit. Välja arvatud tuled.

                          BOOM PS50
                          P120087 00003

                          Alumiiniumist latt, ava L = 5 m, punaste helkuritega. Sisaldab kummi ja ülemist optilist hajutit. Välja arvatud tuled.

                          BOOM PS60
                          P120087 00004

                          Alumiiniumist latt, ava L = 6 m, punaste helkuritega. Sisaldab kummi ja ülemist optilist hajutit. Välja arvatud tuled.

                          OMEGA PS MAXIMA U36
                          P120084 00000

                          Single lock for protective finger trapping casing and screws for MAXIMA ULTRA 36. BOOM PS bar excluded.

                          OMEGA FRA PS MAXIMA U36
                          P120094 00000

                          Resettable impact protection connector (manual) for Maxima Ultra 36 barrier. BOOM PS bar excluded.

                          NEW OMEGA FRA PS MAXIMA U36
                          P12094 00000

                          Resettable release system for PS barriers (max. 5 m)

                          LIGHT PS/ES 30-IP67
                          P120089 20001

                          High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 3 metres long. Power supply unit excluded.

                          LIGHT PS 30
                          P120089 00001

                          High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 3 metres long. Power supply unit excluded.

                          LIGHT PS/ES 40-IP67
                          P120089 20002

                          High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 4 metres long. Power supply unit excluded.

                          LIGHT PS 40
                          P120089 00002

                          High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 4 metres long. Power supply unit excluded.

                          LIGHT PS/ES 50-IP67
                          P120089 20003

                          High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 5 metres long. Power supply unit excluded.

                          LIGHT PS 50
                          P120089 00003

                          High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 5 metres long. Power supply unit excluded.

                          LIGHT PS/ES 60-IP67
                          P120089 20004

                          High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 6 metres long. Power supply unit excluded.

                          LIGHT PS 60
                          P120089 00004

                          High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 6 metres long. Power supply unit excluded.

                          ALLU 2 MAXIMA ULTRA
                          P120075

                          Toiteallikas Maksima Ultra ATM LIGHT komplektile

                          HYPHEN PS
                          P120091

                          Internal reinforcement/joint for BOOM PS booms. Already included in the Maxima Ultra 36 XL barriers but recommended for barriers L >= 5 m with or without accessories.

                          Internal reinforcement/joint for BOOM PS booms. Already included in the Maxima Ultra 36 XL barriers but recommended for barriers L >= 5 m...

                          HYPHEN PS PRO
                          P120108

                          Internal reinforcement for BOOM PS booms L=175 cm. Increases the rigidity of the bar. Recommended for use in particularly windy areas.

                          BTM-SKIRT
                          P120085

                          Alumine ümbris BOOM PS poomidele. Mooduli pikkus L = 2 m.

                          FULL-SKIRT
                          P120086

                          Täielik ümbris (üleval ja all) BOOM PS poomidele. Mooduli pikkus L = 2 m. Ei sisalda KLAMBRI ÜMBRIST; mida läheb vaja esimese mooduli kinnitamiseks tõkkepuu põhiosa külge.

                          Täielik ümbris (üleval ja all) BOOM PS poomidele. Mooduli pikkus L = 2 m. Ei sisalda KLAMBRI ÜMBRIST; mida läheb vaja esimese mooduli...

                          BRACKET SKIRT
                          P120095

                          Ühendusklamber tõkkepuu korpuse ja lihtsa (BTM ÜMBRIS) või kahekordse (TÄISÜMBRIS) alumiiniumresti vahel.

                          ADJ-FOOT
                          P120093

                          Pehmendusega teleskoopjalg BOOM PS poomide jaoks.

                          KIT ART90 PS
                          P120092

                          Kit for 90° articulated bar. Excludes bar, bar connector, LIGHT PS lighting. Compatible with BOOM PS booms.

                          ART90 BOOM PS30
                          P120092 00001

                          POOM PS 90° liigendiga PIKKUS = 5 m eelpaigaldatud. LIGHT PS tuled ei ole komplektis.

                          ART90 BOOM PS30 R/G
                          P120092 00002

                          Boom bar PS L = 5 m 90° articulated including bar and LIGHT PS lighting pre-fitted.

                          ART90 BOOM PS50
                          P120092 00003

                          POOM PS 90° liigendiga PIKKUS = 5 m eelpaigaldatud. LIGHT PS tuled ei ole komplektis.

                          ART90 BOOM PS50 R/G
                          P120092 00004

                          Boom bar PS L = 5 m 90° articulated including bar and LIGHT PS lighting pre-fitted.

                          FAF UNI R
                          P120080

                          Universaalne reguleeritav kahvel kõigi tõkkepuude jaoks; soovitatav koos täisümbrise tarviku paigaldamisega.

                          EBB KIT ATML
                          P120079

                          Elektriline lukk ATML-tõkkepuudele, mis paigaldatakse FAF UNI R reguleeritavale kahvlile.

                          PS JOINT
                          P120113

                          Joint for BOOM PS booms.

                          RME 2
                          P111001 00003

                          230 V topelt kanaliga metallist objekti detekt või paigaldusalus

                          LOOP DETECTOR PRO 230V
                          P111786

                          Metalliobjektide detektor, 2 kanalit, 230 V AC, kuni 4 sagedust kanali kohta kõrvuti asetsevate mähiste paigaldamiseks, reguleeritav tundlikkuse tase, võimendusfunktsioon tundlikkuse suurendamiseks, liikumissuuna juhtimine

                          Metalliobjektide detektor, 2 kanalit, 230 V AC, kuni 4 sagedust kanali kohta kõrvuti asetsevate mähiste paigaldamiseks, reguleeritav...

                          RME 1 BT
                          P111274

                          24 V ühe kanaliga metallist objekti detekt või paigaldusalus

                          Ilmnes ootamatu viga: palun laadige lehekülg uuesti või proovige hiljem uuesti.