Accessories

KIT MONTAGGIO VISTA SL C 1 ANTA
Cod. P960573 00002

KIT MONTAGGIO VISTA SL C 2 ANTE
Cod. P960574 00002

KIT CABLAGGI VISTA SL e SLC 107-125 212-229
Cod. P111447

KIT CABLAGGI VISTA SL e SLC 208-211
Cod. P111448

KIT MONTAGGIO VISTA TL 2 ANTE
Cod. P960610 00002
Komplet za sastavljanje dvokrilnih automatskih vrata VISTA TL.

KIT MONTAGGIO VISTA TL 4 ANTE
Cod. P960611 00002
Komplet za sastavljanje četverokrilnih automatskih vrata VISTA TL.

KIT PROFILI VISTA TL 4,7M N
Cod. P960613 00001

KIT PROFILI VISTA TL 4,7M O
Cod. P960613 00002
Kit profila VISTA TL 4.7m

KIT PROFILI VISTA TL 6,8M N
Cod. P960612 00001

KIT PROFILI VISTA TL 6,8M O
Cod. P960612 00002
Kit profila VISTA TL 6,8m

KIT PROFILI VISTA SLC 4.4M (UTILE) N
Cod. P960617 00001

KIT PROFILI VISTA SLC 4.4M (UTILE) O
Cod. P960617 00002

KIT PROFILI VISTA SL C 6M (UTILE) N
Cod. P960618 00001

KIT PROFILI VISTA SL C 6M (UTILE) O
Cod. P960618 00002

KIT PROFILI VISTA SL 3M UTILE N
Cod. P960614 00001

KIT PROFILI VISTA SL 3M UTILE O
Cod. P960614 00002

KIT PROFILI VISTA SL 4.4M UTILE N
Cod. P960615 00001

KIT PROFILI VISTA SL 4.4M UTILE O
Cod. P960615 00002
Kit profila VISTA SL 4.4m

KIT PROFILI VISTA SL 6M UTILE N
Cod. P960616 00001

KIT PROFILI VISTA SL 6M UTILE O
Cod. P960616 00002
Kit profila VISTA SL 6m

ARGO
Cod. P925202 00001
Operator for sectional doors with a surface area of up to 20 m² and subject to very intensive use.

ARGO G
Cod. P925206 00002
Operator for sectional doors with a surface area of up to 35 m² and subject to very intensive use.

KIT ATM LIGHT 8 R/G 2W
Cod. P120077 00003
Red-green LED lights kit for fitting on ATML bars up to 8 m.

KIT ATM LIGHT 5 R/G 2W
Cod. P120077 00002
Red-green LED lights kit for fitting on ATM bars up to 5m.

KIT ATM LIGHT 3 R/G 2W
Cod. P120077 00001
Red-green LED lights kit for fitting on ATM bars up to 3m.

LIGHT PS 30-B
Cod. P120089 10001
High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 3 metres long. Power supply unit excluded.

LIGHT PS 40-B
Cod. P120089 10002
High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 4 metres long. Power supply unit excluded.

LIGHT PS 50-B
Cod. P120089 10003
High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 5 metres long. Power supply unit excluded.

LIGHT PS 60-B
Cod. P120089 10004
High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 6 metres long. Power supply unit excluded.

PRV-CHN 16
Cod. P800078
Chain for access points up to 16 m, wire Ø4.5 mm. Armoured lock not included.

PCA N8
Cod. P120028 00005
Top and bottom rubber cover profile for booms of 8 m max.

BTM-SKIRT
Cod. P120085
Lower skirt for BOOM PS booms. Module length L = 2 m.

FULL-SKIRT
Cod. P120086
Full skirt (top and bottom) for BOOM PS booms. Module length L = 2 m. Does not include SKIRT BRACKET required for anchoring the first module to the barrier body.
Full skirt (top and bottom) for BOOM PS booms. Module length L = 2 m. Does not include SKIRT BRACKET required for anchoring the first module...

BRACKET SKIRT
Cod. P120095
Connection bracket between barrier body and simple (BTM SKIRT) or double (FULL SKIRT) aluminium rack.

ADJ-FOOT
Cod. P120093
Suspended cushioned telescopic supporting foot for BOOM PS booms.

KIT ART90 PS
Cod. P120092
Kit for 90° articulated bar. Excludes bar, bar connector, LIGHT PS lighting. Compatible with BOOM PS booms.

ART90 BOOM PS30
Cod. P120092 00001
Boom bar PS 90° articulated L = 5 m pre-fitted. Excludes LIGHT PS lighting.

ART90 BOOM PS30 R/G
Cod. P120092 00002
Boom bar PS L = 5 m 90° articulated including bar and LIGHT PS lighting pre-fitted.

ART90 BOOM PS50 R/G
Cod. P120092 00004
Boom bar PS L = 5 m 90° articulated including bar and LIGHT PS lighting pre-fitted.

ART90 BOOM PS50
Cod. P120092 00003
Boom bar PS 90° articulated L = 5 m pre-fitted. Excludes LIGHT PS lighting.

ACTR
Cod. N999608
Pack of 12 additional reflective labels (1 pack already included with each boom)

PCA N5
Cod. P120028 00003
Top and bottom rubber cover profile for booms of 5 m max.

PCA N4
Cod. P120028 00002
Top and bottom rubber cover profile for booms of 4 m max.

ART 90 Q
Cod. N728051
90 ° articulated joint for Moovi and Giotto booms. Max 4m clear passage.

PCA N6
Cod. P120028 00004
Top and bottom rubber cover profile for booms of 6 m max.

OMEGA AT 70
Cod. N999607
Accessories pack for AT 704/706

OMEGA PS MAXIMA U36
Cod. P120084 00000
Single lock for protective finger trapping casing and screws for MAXIMA ULTRA 36. BOOM PS bar excluded.

OMEGA FRA PS MAXIMA U36
Cod. P120094 00000
Resettable impact protection connector (manual) for Maxima Ultra 36 barrier. BOOM PS bar excluded.

OMEGA AQ 6
Cod. N999606
Accessories pack for AQ 6 boom

PRV-CHN 10
Cod. P800077
Chain for access points up to 10 m, wire Ø8 mm. Armoured lock not included.

CHN-DRIVE 2
Cod. P800079
Pavement guide (2 metres) for housing chain

OMEGA ATM U35
Cod. P120062 00001
Single clamping for ATM bar for MAXIMA ULTRA 35. Bar not included.

ZFAF2
Cod. P120026
Additional anchor plates for cementing FAF2 forks to ground.

PCA N3
Cod. P120028 00001
Top and bottom rubber cover profile for booms of 3 m max.

PRM
Cod. P120031
Hand protection kit against cutting, for MOOVI

OMEGA ATM FRA U35
Cod. P120071
Single clamping for ATM bar for Maxima Ultra 35

TWIN CHN PADLOCK
Cod. P800107
Armoured lock for Twin chain closing

PCA ATM 8
Cod. P120053 00003
Protection rubber (black) for fitting on bars from L = 6÷8 m.

MLR2.5
Cod. P120056
Red spring - MAXIMA Utra 35 Ref. spring table

MLB3
Cod. P120057
Blue spring - MAXIMA Ultra 35 Ref. spring table

MLV5
Cod. P120058
Green spring - MAXIMA Ultra 35 Ref. spring table

KIT ATM LIGHT 5 R/G
Cod. P120052 00002
Red-green LED lights kit for fitting on ATM bars up to 5 m.

KIT ATML LIGHT 8 R/G
Cod. P120052 00003
Red-green LED lights kit for fitting on ATM bars up to 8 m.

OMEGA ATML
Cod. P120044 00001
Single clamping, hand guard and screws for ATML bar on MAXIMA 60/80. Bar not included.

KIT ATM LIGHT 3 R/G
Cod. P120052 00001
Red-green LED lights kit for fitting on ATM bars up to 3 m.

MLC9.5
Cod. P120061
Violet spring - Maxima Ultra 68. Ref. spring table

MLC9
Cod. P120060
Yellow spring - Maxima Ultra 68. Ref. spring table

MLC7.5
Cod. P120059
White spring - MAXIMA Ultra 68. Ref. spring table

ATML60
Cod. P120041
Aluminium bar L = 6 m Ø92 mm. Lights and rubber not included. Completely protected by new polystyrene packaging.

OMEGA FRC ATML
Cod. P120045 00001
New fork clamping for ATML bar on barrier model. MAXIMA 60/80. Bar not included.

RST ATM
Cod. P120049
Aluminium rack. Price for 3 metres. Suspended foot not included. Compatible with ATML and ATM model bars.

GA ATM
Cod. P120050
Adjustable suspended foot, powder coated cataphoresis treated.

PCA ATM 5
Cod. P120053 00002
Rubber protection (red) for fitting on bar L = 5 m max.

PCA ATM 3
Cod. P120053 00001
Rubber protection (red) for fitting on bar L = 3 m max.

ATM50 180°
Cod. P120039 00002
5 m articulated bar fitted, 180 ° opening. Lights and rubber not included.

ATM30 180°
Cod. P120039 00001
3 m articulated bar fitted, 180 ° opening. Lights and rubber not included.

ATM30 90°
Cod. P120037 00001
3 m articulated bar fitted, 90 ° opening. Lights and rubber not included.

ATM50 90°
Cod. P120037 00002
5 m articulated bar fitted, 90 ° opening. Lights and rubber not included.

OMEGA ATM FRA
Cod. P120048 00001
Fracture system clamping for bar ATM

OMEGA FRC ATML U
Cod. P120047 00001
Fork clamping for ATML bar on barrier model. MAXIMA 68 ULTRA. Bar not included.

OMEGA ATML U
Cod. P120046 00001
Single clamping, hand guard and screws for ATML bar on MAXIMA 68 ULTRA. Bar not included.

HYPHEN PS
Cod. P120091
Internal reinforcement/joint for BOOM PS booms. Already included in the Maxima Ultra 36 XL barriers but recommended for barriers L >= 5 m with or without accessories.
Internal reinforcement/joint for BOOM PS booms. Already included in the Maxima Ultra 36 XL barriers but recommended for barriers L >= 5 m...

EBB KIT ATML
Cod. P120079
Electric lock for ATML rods to be installed on an FAF UNI R adjustable fork.

FAF UNI R
Cod. P120080
Universal adjustable fork for all rods; recommended with installation of FULL SKIRT accessory.

CVZ-S
Cod. N999320
steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports attachment Max. load capacity 800 kg.

CVZ
Cod. D571053
steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw-fitted on supports attachment Max. load capacity 1000 kg.

CP
Cod. D221073
plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots attachment Max. load capacity 600 kg.

CFZ
Cod. D571054
galvanized steel rack, 4-module, cross-section 22 x 22 mm, length 2 m, welding attachment Max. load capacity 2000 kg.

CFZ6
Cod. D571491
galvanized steel rack, 6-module, cross-section 30 x 30 mm, length 2 m, welding attachment Max. load capacity 4000 kg.

CSR99 20
Cod. R920110
Kit for 8k2 resistive safety edges, length 2 metres, with 99 mm-high EPDM rubber strip, aluminium section, 2 contact terminals, 2 caps, 1 x 8.2 kOhm resistance connector and connection cable.
Kit for 8k2 resistive safety edges, length 2 metres, with 99 mm-high EPDM rubber strip, aluminium section, 2 contact terminals, 2 caps, 1 x...

TRWB
Cod. R920111
Wireless transmission system for resistive safety edges comprising transmitter and receiver.

TWB
Cod. P125050
Wireless transmitter for resistive safety edges.

STRAIGHT EXTENSION
Cod. P145001
Straight extension access.for LEONARDO KIT

ANGULAR EXTENSION
Cod. P145002
Angular extension access.for LEONARDO KIT

CABLE LX BT
Cod. N999417
1603 cable for LUX BT/GIUNO BT/IGEA - skein of 100 m

CABLE N
Cod. N999405
Control unit connecting cable for PHOBOS AC A. Coil of 100 m, 4x0,75

CABLE N BT
Cod. N999404
Control unit connecting cable for PHOBOS BT A, KUSTOS BT A. Coil of 100 m, 3x1,5.

ECOSOL CABLE
Cod. N999476
20 m extension for ECOSOL CHARGER

PEGASO CABLE MONO
Cod. D121631
Pre-wired power supply cable for PEGASO single phase operators. Length 1 m

PEGASO CABLE TRI
Cod. D121632
Pre-wired power supply cable for PEGASO three-phase operators. Length 1 m

PEGASO CABLE AUTO 5
Cod. D121633
Pre-wired connection cable between PEG INT and external control unit electric power supply. Length 5 m

PEGASO CABLE AUTO 10
Cod. D121634
Pre-wired connection cable between PEG INT and external control unit electric power supply. Length 10 m

PEGASO UP CONTROL 5
Cod. D121624
Cable with pre-wired OPEN - STOP - CLOSE keypad for PEGASO UP operators. For adjusting motor limit switches from floor level. Length 5 m

PEGASO UP CONTROL 10
Cod. D121625
Cable with pre-wired OPEN - STOP - CLOSE keypad for PEGASO UP operators. For adjusting motor limit switches from floor level. Length 10 m

PEGASO CABLE ENC 5
Cod. D121674
Pre-wired connection cable between operator and external control unit for the management of encoder. Lenght 5 m

PEGASO CABLE ENC 10
Cod. D121675
Pre-wired connection cable between operator and external control unit for the management of encoder. Lenght 10 m

PEGASO CABLE AUTO 5N
Cod. D121679
Pre-wired connection cable between PEG INT and external control unit electric power supply. Length 5 m

PEGASO CABLE AUTO 10N
Cod. D121680
Pre-wired connection cable between PEG INT and external control unit electric power supply. Length 10 m

BOLLARD CABLE EXT25
Cod. P800114
Extra charge for 25 m cable for bollards (to be added to the 10 included into bollards)

BOLLARD CABLE EXT15
Cod. P800041
Extra charge for 15 m cable for bollards (to be added to the 10 included into bollards)

BOLLARD CABLE EXT40
Cod. P800042
Extra charge for 40 m cable for bollards (to be added to the 10 included into bollards)

BOLLARD CABLE EXT50
Cod. P800115
Extra charge for 50 m cable for bollards (to be added to the 10 included into bollards)

ARB LUX G
Cod. N733474
Adjustable front and rear bracket for LUX G operator

ARB LUX
Cod. N733426
Adjustable front and rear bracket for LUX operator

ARB PHOBOS N L
Cod. N733428
Front and rear adjustable bracket for PHOBOS operator

ARB PHOBOS N
Cod. N733427
Front and rear adjustable bracket for PHOBOS operator

ARB ORO
Cod. N733424
Adjustable front and rear brackets for ORO operator

ECOSOL POST BR
Cod. N999473
Set of stainless steel screws and brackets for installing the ECOSOL PANEL on a post of diameter 48-100mm

ECOSOL SECURITY
Cod. N999475
Anti-tamper stainless steel screws and fasteners for ECOSOL PANEL and ECOSOL POST BR

TPF
Cod. P800040
Foundation and anchor plate for totem

SBV
Cod. P111445
Anodised aluminium supporting crosspiece for VISTA SL

PEGASO ADA
Cod. N733449
PEGASO ADA adapter for installation on doors with 1"1/4 shaft

SFI
Cod. N999156
Base plate for ARES and ICARO (supplied with operator)

SFSP
Cod. P125015
Adjustable anchor base for SP3500, supplied separately

BASP
Cod. P125001
Base plate for SP4000 (supplied with operator)

SP3500 SAFETY
Cod. P125016
Safety microswitch for SP3500

PPE
Cod. D730567
Anchoring plate

SFR
Cod. N733286
Adjustable bracket for PHOBOS BT A, PHOBOS AC A, KUSTOS BT A

SFR L
Cod. N733347
Adjustable bracket for PHOBOS BT A, PHOBOS AC A, KUSTOS BT A

SBV TL
Cod. P111640 00001
Vista TL support beam, length 6.82 m

LRV
Cod. P135005
Short articulated arms for IGEA and IGEA BT

FCS SX
Cod. N733066 00004
Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf

CPS SX
Cod. N733066 00002
Foundation box designed for fitting the SUB left-hand operator

CPS G
Cod. N733092
Weight-bearing foundation box for preparation for assembly of SUB G right and left operator

FCS DX
Cod. N733066 00003
Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf

CPS DX
Cod. N733066 00001
Foundation box designed for fitting the SUB right-hand operator

BTCF 120 E INOX
Cod. N733398
Stainless steel foundation box with levers for ELI AC A, ELI BT A. Release not provided

BTCF 120 E
Cod. N733397
Foundation box with levers for ELI AC A, ELI BT A. Release not supplied

FCS BT
Cod. N733480 00001
Foundation box for SUB BT series operators

CID SX
Cod. N733201 00002
Left hand tin plate + acc.(SUB)

CID DX
Cod. N733201 00001
Right hand tin plate + acc.(SUB)

FLANGE RANCH C
Cod. P800109
Flange for Ranch C

FLANGE RANCH D
Cod. P800110
Flange for Ranch E

FLANGE RANCH E
Cod. P800119
Flange for Ranch E

BSC
Cod. N728002
Arm for installation of SUB out of the gate axis

BS E5
Cod. N728011
Slide lever for E5 N. Max leaf length 1.6 m, max leaf weight 100 kg

BL E5
Cod. N733008
Long articulated arm for E5, max leaf length 2 m, max leaf weight 200 kg

E180
Cod. N733304
Accessory for opening to 180 ° for ELI AC A40, ELI BT A40 operator

ASW 350 XL RIG
Cod. P111565
Vista SW XL rigid pull arm. Jamb max dimens.: 100 mm

ASW 260 XL RIG
Cod. P111790
Rigid pull arm Vista SW 260 XL.

ASW 350 XL ART
Cod. P111566
Vista SW XL articulated push arm. Max jamb dimens.: 150 mm

ASW 260 XL ART
Cod. P111791
Articulated push arm Vista SW 260 XL.

ASW 260 XL ARTL ARTIC. ARM PUSH LONG SW 260
Cod. P111794
Articulated push arm Vista SW 260 XL.

ASW 350 XL ARTL
Cod. P111567
Vista SW XL long articulated push arm. Jamb dimens. 150 mm

EXT ASW 350 XL 30
Cod. P111563 00001
Vista SW 260 XL arm connection, spacer

EXT ASW350 260 XL L=90
Cod. P111792
Arm connection L=90 mm Vista SW XL, spacer

EXT ASW350 260 XL L=110
Cod. P111796
Arm connection L=110 mm Vista SW XL, spacer

EXT ASW350 260 XL L=130
Cod. P111797
Arm connection L=130 mm Vista SW XL, spacer

EXT ASW 350 XL 50
Cod. P111563 00002
Arm connection L=50 mm Vista SW XL, spacer

EXT ASW 350 XL 70
Cod. P111563 00003
Arm connection L=70 mm Vista SW XL, spacer

EXT ASW 350 XL 90
Cod. P111563 00004
Arm connection L=90 mm Vista SW XL, spacer

LBA
Cod. N734921
Lever for articulated arm, E5 BT A12, E5 BT A18

LS12
Cod. N735057
Short pedestrian slide lever for E5 BT A12

LS18
Cod. N735058
Long slide lever for E5 BT A18

TL 60 KIT
Cod. P130018
Basic accessories kit for installation of an actuator, necessary for all motors (10 to 50 Nm) without handle release.

TL 60 M KIT
Cod. P130020
Basic accessories kit for installation of an actuator with handle release. Necessary for proper installation.

SM504
Cod. P130015
Support with bearing for octagonal roller - screw type

SM505
Cod. P130014
Support for octagonal roller - cementing type

BLOCCANTI 40
Cod. P130001
Anti-break-in block for shutters with slats of height 40 mm.

BLOCCANTI 50
Cod. P130013
Anti-break-in block for shutters with slats of height 50 mm.

SPAC
Cod. P111678
Pair of locks (2) for glass leaf

XPASS 800 ALARM
Cod. P800103
Anti-vandalism alarm for XPASS 275/800

RUL 60/1,5
Cod. P130010
Octagonal shutter winding roller Ø60 mm x 1.5 m.

RUL 60/3
Cod. P130012
Octagonal shutter winding roller Ø60 mm x 3 m.

RUL 60/6
Cod. P130008
Octagonal shutter winding roller Ø60 mm x 6 m.

CAL 60/100
Cod. P130002
Adjustable telescopic octagonal cover for RUL 60.

CAL 60/30
Cod. P130004
Octagonal cover for RUL 60.

CBO
Cod. D730251
Anchor base for MOOVI and GIOTTO series barriers

SB
Cod. D573003
Aluminium skirt for road barrier booms. Price per linear metre (Calculate length of useful passage minus 40cm)

PCA 3
Cod. P120003 00001
Upper and lower shaped rubber cover for booms of max 3 m. For MOOVI and MICHELANGELO red

AT 502
Cod. N728028
Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 2.6 m.

AT 504
Cod. N728027
Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 4.6 m.

AT 704
Cod. N728026
First part of telescopic round boom for MICHELANGELO, diam. 70 mm, length 4.3 m.

AT 706
Cod. N728030
Round boom diam. 70 mm length 6.35 m for MICHELANGELO. for openings up to 6 m

AQ6
Cod. N728022
Complete 6 m rectangular boom for MICHELANGELO

BM
Cod. D730964
Anchor base for MICHELANGELO series barriers

GAM
Cod. D940007
Mobile rest leg for BGV barrier boom (not usable on BGV 30)

OMEGA AQ S/STEEL
Cod. N999509
Pack of accessories for installation of 3/5 m rectangular boom for MOOVI INOX

OMEGA AQ
Cod. N999507
Pack of accessories for installation of 3/5 m rectangular boom for MOOVI/GIOTTO

OMEGA AT
Cod. N999513
Pack of accessories for installation of 3/6 m round boom for MOOVI/GIOTTO

AT3
Cod. N728031
Complete 3 metre round boom for MOOVI/GIOTTO

AT5
Cod. N728032
Complete 5 metre round boom for MOOVI/GIOTTO

AQ3
Cod. N728033
Complete 3 metre rectangular boom for GIOTTO and MOOVI

AQ5
Cod. N728034
Complete 5 metre rectangular boom for GIOTTO and MOOVI

AT6
Cod. N728038
Complete 6 metre round boom for MOOVI/GIOTTO

FAF 2
Cod. P120023
Rest fork for booms. For bolting to ground.

FAF 2R RAL
Cod. P120025 00100
Fixed rest fork for booms with customised RAL colour. For bolting to ground.

FAF 2 RAL
Cod. P120023 00100
Fixed rest fork for booms with customised RAL colour. For bolting to ground.

ATML EXT2
Cod. P120042
Extension L=2m for bar model ATML 60. Lights and rubber not included.

ATM25
Cod. P120102 00001
Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.
Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM25
Cod. P120111 00001
Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.
Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM50
Cod. P120102 00004
Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.
Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM50
Cod. P120111 00004
Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.
Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM40
Cod. P120102 00003
Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging
Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM40
Cod. P120111 00003
Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging
Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM30
Cod. P120102 00002
Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.
Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM30
Cod. P120111 00002
Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.
Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

BOOM PS30
Cod. P120087 00001
Aluminium bar, opening L = 3 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM PS40
Cod. P120087 00002
Aluminium bar, opening L = 4 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM PS50
Cod. P120087 00003
Aluminium bar, opening L = 5 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM PS60
Cod. P120087 00004
Aluminium bar, opening L = 6 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

GA AQ AT
Cod. D940008
Movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers) -

GAMA AQ AT
Cod. D940009
Dampened movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers) -

THERMO
Cod. P120018
Thermostatically controlled heating element for use of GIOTTO BT A, MOOVI, MICHELANGELO BT A barriers to ambient temperatures of -40°C

PPA TL 1600 N
Cod. P111663 00001
Clamps for glass leaf, 1600 mm, natural

PPA TL 1600 O
Cod. P111663 00002
Clamps for glass leaf, 1600 mm, anodised

PPA TL 3200 N
Cod. P111664 00001
Clamps for glass leaf, 3200 mm, natural

PPA TL 3200 O
Cod. P111664 00002
Clamps for glass leaf, 3200 mm, anodised

PPA SL-SLC 8-10-12-13.5
Cod. P111679
Pair of clamps for glass leaves 8, 10, 12, 13.5 mm

BIR C
Cod. N190104
Rubber safety edge (H 30 mm), price per m

CSP 10
Cod. N190039
Rubber shock absorber profile length 1000 mm

CSP 20
Cod. N190040
Rubber shock absorber profile length 2000 mm

CSP 25
Cod. N190041
Rubber shock absorber profile length 2500 mm

KIT PPA 10
Cod. P111522 00001
Profile clamp kit for glass leaves 10mm. Allows the fitting of approx. 6 clamps for leaves of width 1000mm

KIT PPA 12
Cod. P111522 00002
Profile clamp kit for glass leaves 12mm. Allows the fitting of approx. 6 clamps for leaves of width 1000mm

PRV 20.01O
Cod. P111630 00002
Upright L= 5.10m, 4pcs, 7.4Kg. Anodised.

PRV 20.02O
Cod. P111631 00002
Low upright L= 5.10m, 8pcs, 12Kg. Anodised.

PRV 20.03O
Cod. P111632 00002
Strip L= 5.10m, 5pcs, 20.4Kg. Anodised.

PRV 20.04O
Cod. P111633 00002
Crosspiece L= 5.10m, 4pcs, 19.3Kg. Anodised.

PRV 20.06O
Cod. P111635 00002
Fixed adapter L= 5.10m, 6pcs, 9.7Kg

PRV 20.07O
Cod. P111636 00002
“L” fixed L= 5.10m, 12pcs, 15.2Kg. Anodised.

PRV 20.08O
Cod. P111637 00002
Photocell holder L= 5.10m, 6pcs, 18Kg. Anodised.

PRV 20.09O
Cod. P111638 00002
Labyrinth L= 5.10m, 8pcs, 14.9Kg. Anodised.

PRV 20.10O
Cod. P111639 00002
Guide rail L= 5.10m, 6pcs, 8.9Kg. Anodised.

PRV 20.11O
Cod. P111690 00002
Strip L= 6.82m, 2pcs, 36.2Kg. Anodised.

PRV 20.A16
Cod. P111645
Fixed wing accessories kit, 20pcs

PRV 20.A17
Cod. P111646
Sliding wing accessories kit, 20pcs

PRV 20.A18
Cod. P111647
Floor guide, 1pc

PRV 20GD.19
Cod. P111648
Telescopic floor guide, 1pc

PRV 20GD.20
Cod. P111649
Glass separation strip accessories kit, 20pcs

PRV 20.A21
Cod. P111650
Plate for fixing strip in corridor, 1pc

PRV 20.A22
Cod. P111651
Plate for fixing strip to wall, 1pc

PRV 20.A23
Cod. P111710
Hex socket screw M5X16 8.8 500PCS, 500pcs

PRV 20.A24
Cod. P111711
Hex socket countersunk flathead cap screw M5X12 10.9 100PCS, 100pcs

PRV BR.13
Cod. P111642
Small brush 10mm, 20pcs

PRV BR.26
Cod. P111620
Narrow soft brush, 175 m

PRV BR.27
Cod. P111621
Wide soft brush, 450 m

PRV BR.47
Cod. P111618
Small brush 14mm. L= 2.5m, 20 pcs

PRV GK.02
Cod. P111623
Type 2 glass stop seal, 400 m

PRV GK.03
Cod. P111624
Type 3 glass stop seal, 150 m

PRV GK.06
Cod. P111625
Type 6 glass stop seal, 250 m

PRV GK.07
Cod. P111626
Type 7 glass stop seal, 250 m

PRV GK.09
Cod. P111712
Type 9 glass stop seal, 180m

PRV GK.12
Cod. P111641
Profile rabbet seal, 75m

PRV GK.14
Cod. P111643
Stopping seal, 100m

PRV GK.15
Cod. P111644
Type A glass stop sea, 90m

PRV GK.24
Cod. P111619
Semifixed wing rabbet seal, 250 m

PRV GK.28
Cod. P111622
Sliding wing rabbet seal, 50 m

X EF1
Cod. N999510
Electric brake for Wind Rmc and Rmb 230V

FCE
Cod. N733951
Magnetic limit switches for BT and AC models.

MOOVI PRM KIT
Cod. P120004
Hand protection kit against cutting, for MOOVI

SASA 1AM SIST SFOND.1 ANTA MOBILE
Cod. P111720 00002
Breakthrough system kit for 1 movable leaf

SASA 1AMF SIST SFOND.ANTE 1 MOB + 1 FX
Cod. P111721 00002
Breakthrough system kit for 1 fixed leaf and 1 movable leaf

SASA 2AM SIST SFOND_.2 ANTE MOB
Cod. P111722 00002
Breakthrough system kit for 2 movable leaves

SASA 2AMF SIST SFOND.ANTE 2 MOB + 2 FX
Cod. P111723 00002
Breakthrough system kit for 2 fixed leaves and 2 movable leaves

SASA BRACKETS FOR LEAF BREAKAGE DETECTION PHOTOC.
Cod. P111724 00002
Bracket kit for mounting FPA1 photocells for leaf breakage detection

SASA PRA 2,5 PROF.PROT.ANTA FX/MOB 2.5M
Cod. P111725 00002
Protection profile for fixed/movable leaf. Length L = 2.5 m

SASA PRA 5 PROF. PROTEZ.ANTA FX/MOB, 5M
Cod. P111726 00002
Protection profile for fixed/movable leaf. Length L = 5 m

PRV 40.08O CORNICE ABBATTIMENTO L=6.82
Cod. P111607 00002
Break-open frame for fixed leaf joint. Length L = 6.82 m

PRV 40.12O MONTANTE ABBATTIMENTO L=5.1
Cod. P111610 00002
Break-open upright for fixed leaf joint. Length L = 5.1 m

PRV 40.A53 CERNIERE PER SASA DX
Cod. N733589
Right hinge for joint on fixed leaf

PRV 40.A54 CERNIERE PER SASA SX
Cod. N733590
Left hinge for joint on fixed leaf

TOTEM UNIT
Cod. P800116
Modulo base per il TOTEM. Può essere usato sia come modulo inferiore sia come superiore. Utilizzato per il montaggio di accessori di comando. Copertura superiore non inclusa.
Modulo base per il TOTEM. Può essere usato sia come modulo inferiore sia come superiore. Utilizzato per il montaggio di accessori di...

TOTEM UNIT - RAL
Cod. P800116 00102
Modulo base per il TOTEM. Può essere usato sia come modulo inferiore sia come superiore. Utilizzato per il montaggio di accessori di comando. Copertura superiore non inclusa. RAL colour as requested.
Modulo base per il TOTEM. Può essere usato sia come modulo inferiore sia come superiore. Utilizzato per il montaggio di accessori di...

TBA
Cod. P800037
Totem, bottom element containing panel and accessories. Top covering not included.

TSU
Cod. P800038
Totem, top element for fitting control accessories. Top covering not included.

TCAP
Cod. P800108
Top covering without lights for elements of Totem.

TCAP - RAL
Cod. P800108 00102
Top covering without lights for elements of Totem. RAL colour as requested.

TLIGHTS - RAL
Cod. P800117 00102
Traffic lights and upper cover for totem unit. RAL colour to order

CARTER VISTA SL C-107 L=1600 N
Cod. P111486 00001

CARTER VISTA SL C-108 L=1800 N
Cod. P111487 00001

CARTER VISTA SL C-109/209 L=2000 N
Cod. P111472 00001

CARTER VISTA SL C-110/210 L=2200 N
Cod. P111473 00001

CARTER VISTA SL C-111/211 L=2400 N
Cod. P111474 00001

CARTER VISTA SL C-112/212 L=2600 N
Cod. P111475 00001

CARTER VISTA SL C-113/213 L=2800 N
Cod. P111476 00001

CARTER VISTA SL C-114/214 L=3000 N
Cod. P111470 00001

CARTER VISTA SL C-115/215 L=3200 N
Cod. P111477 00001

CARTER VISTA SL C-116/216 L=3400 N
Cod. P111478 00001

CARTER VISTA SL C-117/217 L=3600 N
Cod. P111479 00001

CARTER VISTA SL C-119/219 L=4000 N
Cod. P111480 00001

CARTER VISTA SL C-121/221 L=4400 N
Cod. P111481 00001

CARTER VISTA SL C-123/223 L=4800 N
Cod. P111482 00001

CARTER VISTA SL C-125/225 L=5200 N
Cod. P111483 00001

CARTER VISTA SL C-208 L=1900 N
Cod. P111471 00001

CARTER VISTA SL C-227 L=5600 N
Cod. P111484 00001

CARTER VISTA SL C-229 L=6000 N
Cod. P111485 00001

VISTA SL-107 SX
Cod. P111411 00002

VISTA SL-108 SX
Cod. P111412 00002

VISTA SL-109 SX
Cod. P111414 00002

VISTA SL-110 SX
Cod. P111473 00002

VISTA SL-111 SX
Cod. P111416 00002

VISTA SL-112 SX
Cod. P111417 00002

VISTA SL-113 SX
Cod. P111418 00002

VISTA SL-114 SX
Cod. P111419 00002

VISTA SL-115 SX
Cod. P111420 00002

VISTA SL-116 SX
Cod. P111421 00002

VISTA SL-117 SX
Cod. P111422 00002

VISTA SL-119 SX
Cod. P111423 00002

VISTA SL-121 SX
Cod. P111424 00002

VISTA SL-123 SX
Cod. P111425 00002

VISTA SL-125 SX
Cod. P111426 00002

VISTA SL-208
Cod. P111413 00002

VISTA SL-227
Cod. P111427 00002

VISTA SL-229
Cod. P111428 00002

CARTER VISTA SL C-107 L=1600 O
Cod. P111486 00002

CARTER VISTA SL C-108 L=1800 O
Cod. P111487 00002

CARTER VISTA SL C-109/209 L=2000 O
Cod. P111472 00002

CARTER VISTA SL C-110/210 L=2200 O
Cod. P111415 00002

CARTER VISTA SL C-111/211 L=2400 O
Cod. P111474 00002

CARTER VISTA SL C-112/212 L=2600 O
Cod. P111475 00002

CARTER VISTA SL C-113/213 L=2800 O
Cod. P111476 00002

CARTER VISTA SL C-114/214 L=3000 O
Cod. P111470 00002

CARTER VISTA SL C-115/215 L=3200 O
Cod. P111477 00002

CARTER VISTA SL C-116/216 L=3400 O
Cod. P111478 00002

CARTER VISTA SL C-117/217 L=3600 O
Cod. P111479 00002

CARTER VISTA SL C-119/219 L=4000 O
Cod. P111480 00002

CARTER VISTA SL C-121/221 L=4400 O
Cod. P111481 00002

CARTER VISTA SL C-123/223 L=4800 O
Cod. P111482 00002

CARTER VISTA SL C-125/225 L=5200 O
Cod. P111483 00002

CARTER VISTA SL C-208 L=1900 O
Cod. P111471 00002

CARTER VISTA SL C-227 L=5600 O
Cod. P111484 00002

CARTER VISTA SL C-229 L=6000 O
Cod. P111485 00002

Cover Vista TL 2 leaves, anodised finish
Cod. P111569 00002

Cover Vista TL 2 leaves, anodised finish
Cod. P111570 00002

Cover Vista TL 2 leaves, anodised finish
Cod. P111571 00002

Cover Vista TL 2 leaves, anodised finish
Cod. P111572 00002

Cover Vista TL 2 leaves, anodised finish
Cod. P111573 00002

Cover Vista TL 2 leaves, anodised finish
Cod. P111574 00002

Cover Vista TL 2 leaves, anodised finish
Cod. P111575 00002

Cover Vista TL 2 leaves, anodised finish
Cod. P111576 00002

Cover Vista TL 2 leaves, anodised finish
Cod. P111577 00002

Cover Vista TL 2 leaves, anodised finish
Cod. P111578 00002

Cover Vista TL 2 leaves, anodised finish
Cod. P111579 00002

Cover Vista TL 2 leaves, anodised finish
Cod. P111580 00002

Cover Vista TL 2 leaves, anodised finish
Cod. P111581 00002

Cover Vista TL 2 leaves, anodised finish
Cod. P111582 00002

Cover Vista TL 2 leaves, anodised finish
Cod. P111583 00002

Cover Vista TL 4 leaves, anodised finish
Cod. P111584 00002

Cover Vista TL 4 leaves, anodised finish
Cod. P111585 00002

Cover Vista TL 4 leaves, anodised finish
Cod. P111586 00002

Cover Vista TL 4 leaves, anodised finish
Cod. P111587 00002

Cover Vista TL 4 leaves, anodised finish
Cod. P111588 00002

Cover Vista TL 4 leaves, anodised finish
Cod. P111589 00002

Cover Vista TL 4 leaves, anodised finish
Cod. P111590 00002

Cover Vista TL 4 leaves, anodised finish
Cod. P111591 00002

Cover Vista TL 4 leaves, anodised finish
Cod. P111592 00002

Cover Vista TL 4 leaves, anodised finish
Cod. P111593 00002

Cover Vista TL 4 leaves, anodised finish
Cod. P111594 00002

Cover Vista TL 4 leaves, anodised finish
Cod. P111595 00002

Cover Vista TL 4 leaves, anodised finish
Cod. P111596 00002

Cover Vista TL 4 leaves, anodised finish
Cod. P111597 00002

Cover Vista TL 4 leaves, anodised finish
Cod. P111598 00002

ESPAS 10 PROGRAMMER KIT
Cod. P800128
Software for rates programming for Money Box Plus station (serial interface, USB memory stick with sw, USB to RS232 converter includeds)

CIT-BUS POWER SUPPLY BOX & TRANSFERING CALLS
Cod. 21188
Quadro citofonico con deviatore di chiamata. Per deviare chiamate citofoniche su rete telefonica fissa (completo di alimentatore). Compatibile con sistemi CIT-BUS.
Quadro citofonico con deviatore di chiamata. Per deviare chiamate citofoniche su rete telefonica fissa (completo di alimentatore)....

KIT STATIONS ANCHOR BASE
Cod. 21261
Column anchor base for 20/30 entry/exit terminals

TRAFFIC LIGHT 200MM
Cod. 130186
Semaforo di pista a due luci ad elevata luminosità per regolazione del transito. Diametro 200mm,

TRAFFIC LIGHT LED 200MM
Cod. 130197
Semaforo di pista a due luci LED ad elevata luminosità per regolazione del transito. Diametro 200mm.

TRAFFIC LIGHT LED 100MM
Cod. 130198
Semaforo di pista a due luci LED ad elevata luminosità per regolazione del transito.

POLE SUPPORT D60 H3500
Cod. 130282
Galvanized steel pole support for panels. Diam. 60mm - h 3500mm

CIT-BUS EXTERNAL MODULE
Cod. 135104
Outdoor digital intercom station

CASH DRAWER
Cod. 135138
Cash drawer compatible with receipt printers that emulate ESC/POS command. RJ11 terminal to connect to the receipt printer and activate the cash drawer automatically. Compatibility with receipt printer only.
Cash drawer compatible with receipt printers that emulate ESC/POS command. RJ11 terminal to connect to the receipt printer and activate the...

CIT-BUS DIGITAL INTERCOM 20P
Cod. 135656
Citofono centralino da tavolo, 20 postazioni, compatibile con citofoni digitali CIT-BUS.

CONTROL DESK IP
Cod. 135810
IP intercom control Desk - 3,5" TFT display

CIT-BUS DIGITAL INTERCOM 10P
Cod. 135993
Citofono centralino da tavolo, 10 postazioni, compatibile con citofoni digitali CIT-BUS.

TRAFFIC LIGHT POLE SUPPORT
Cod. 139047
Traffic light pole support

UHF WINDSHIELD TAG
Cod. 145029
TUVA Tag (car dashboard)

FANFOLD GAP TICKETS NEUTRAL
Cod. 360558
Fanfold ticket box, 4000pcs tickets box with gap, neutral

LASER SAFATEY DETECTOR
Cod. 394073
Safety laser detector. Its used in combination with magnetc loops in order to add an additional safety device (eg: for pedestrian). Includes two relay outputs. Maximum detection range: 5m x 5m.10-35VDC power supply.
Safety laser detector. Its used in combination with magnetc loops in order to add an additional safety device (eg: for pedestrian). Includes...

LASER DETECTOR REMOTE CONTROL
Cod. 394075
Remote control for settings Safety laser detector and Presence and Safety laser detector.

PRESENCE AND SAFETY DETECTOR - LASER LOOPS
Cod. 394080
Presence and Safety laser detector. Its used as an alternative of magnetc loops. Includes one input and two relay outputs. Maximum detection range: 9.9m x 9.9m.10-35VDC power supply.
Presence and Safety laser detector. Its used as an alternative of magnetc loops. Includes one input and two relay outputs. Maximum detection...

CUSTOMIZED FANFOLD GAP TICKET
Cod. 999ASK999
Customized fanfold ticket box, 4000pcs tickets box with gap. Minimum 13 boxes.

RFID PROXIMITY CARD 125kHz
Cod. D110919
Proximity RFID card 125KHz for 20-30 system, 1 pcs. Minimum 10pcs.

MAGNETIC LOOP 6MT
Cod. D110945
High sensivity pre-cabled magnetic loop (10m tail x 6m loop)

COURTESY DISPLAY
Cod. D112048
Display di cortesia per sistemi cablati. Da collegare alla stazione presidiata POS.

CIT-BUS MODULE
Cod. D112063
Capsula citofono digitale da interno (stazioni e cassa) CIT-BUS.

CIT-IP MODULE
Cod. D112074
IP intercom module (stations/POF)

MIFARE ISOCARD DESK READER 13,56MHz
Cod. D112086
13,56MHz MIFARE Isocard reader for 30 system manned station, USB.

EXTENDED TEMPERATURE 8P SWITCH
Cod. D112115
Ethernet Switch with extended temperature range (-40°C to +70°C ), 8 Ethernet Port.

LOOP DETECTOR PRO
Cod. D113948
2 channel loop detector, 24VDC/AC, up to 4 frequencies per channel for close loop installations, adjustable sensitivity, boost function for sensitivity increase. Direction detection.
2 channel loop detector, 24VDC/AC, up to 4 frequencies per channel for close loop installations, adjustable sensitivity, boost function for...

CIT-BUS BARRIER OPENING RELAY
Cod. D113967
Relay for barrier opening by CIT-BUS intercom

RFID ISOCARD DESK READER 125kHz
Cod. D113984
125kHz RFID Isocard reader for 30 system manned station, USB.

LOOP DETECTOR LITE
Cod. D113999
2 channel loop detector, 24VDC, up to 4 frequencies per channel for close loop installations, adjustable sensitivity, boost function for sensitivity increase
2 channel loop detector, 24VDC, up to 4 frequencies per channel for close loop installations, adjustable sensitivity, boost function for...

CIT-IP EXTERNAL MODULE 1P
Cod. D114006
Outdoor IP intercom station, 1 button

RECEIPT PRINTER KIT
Cod. D114077
Roll-paper TCP/IP printer for customer's receipt for 30 system. Includes: LAN cable, power supply, paper roll. LAN cable. Power supply, paper roll included.
Roll-paper TCP/IP printer for customer's receipt for 30 system. Includes: LAN cable, power supply, paper roll. LAN cable. Power supply,...

CONTROL DESK IP TOUCH
Cod. D114098
IP intercom control Desk - 7" IPS display touch screen

KIT NEA LITE POLE MOUNTING
Cod. D114176
Pole mounting kit for Nea Lite camera.

TRAFFIC LIGHT 100MM
Cod. D121458
Semaforo di pista a due luci ad elevata luminosità per regolazione del transito.

HEATER UNIT
Cod. D121711
Heater unit 60W for internal station/POF installation on DIN bar

RELE' TEMP
Cod. D121767
Temporized relay (1 switch, 16A 0,1s, 24hrs, multitension)

MAGNETIC LOOP 8MT
Cod. D141784
High sensivity pre-cabled magnetic loop (10m tail x 8m loop)

MIFARE PROXIMITY CARD 13,56MHz
Cod. D191145
Proximity MIFARE 13,56MHz card for 30 system

FANFOLD GAP TICKETS BFT
Cod. D191186
Fanfold ticket box, 4000pcs tickets box with gap & BFT logo

BC BONUS SCANNER SUPPORT
Cod. D223127
Table stand for Bc Bonus scanner

TRUCK HEIGHT PEDESTAL 800MM
Cod. D413445
Accessorio per colonnine di ingresso ed uscita che consente di elevare la colonnina ad un'altezza adeguata all'utilizzo da parte di camion. Completa di sportello e finiture esterne come le stazioni.
Accessorio per colonnine di ingresso ed uscita che consente di elevare la colonnina ad un'altezza adeguata all'utilizzo da parte di camion....

BUS HEIGHT PEDESTAL 600MM
Cod. D413530
Accessorio per colonnine di ingresso ed uscita che consente di elevare la colonnina ad un'altezza adeguata all'utilizzo da parte di bus Completa di sportello e finiture esterne come le stazioni.
Accessorio per colonnine di ingresso ed uscita che consente di elevare la colonnina ad un'altezza adeguata all'utilizzo da parte di bus...

ROLL THERMAL PAPER SUPPORT PIN
Cod. D576215
Support pin for roll thermal paper

ROLL THERMAL PAPER HUB
Cod. D576216
Hub for roll thermal paper

BC BONUS SLAVE
Cod. FP205005
Il dispositivo BC BONUS, collegato ad un server di parcheggio, consente di assegnare a dei ticket d'ingresso specifici bonus a tempo o monetari.
Il dispositivo BC BONUS, collegato ad un server di parcheggio, consente di assegnare a dei ticket d'ingresso specifici bonus a tempo o...

BC BONUS MASTER
Cod. FP205015
Il dispositivo BC BONUS, collegato ad un server di parcheggio, consente di assegnare a dei ticket d'ingresso specifici bonus a tempo o monetari. Completo di convertirore 485.
Il dispositivo BC BONUS, collegato ad un server di parcheggio, consente di assegnare a dei ticket d'ingresso specifici bonus a tempo o...

QUADRO DETECTOR
Cod. FP208003
Loop detector box for counting system (2 channel loop detector included)

CIT-BUS POWER SUPPLY BOX
Cod. FP510001
Alimentatore per citofoni digitali CIT-BUS.

ESPAS TICKET PRINTER
Cod. P2010041E
Stampante termica per ticket e/o ricevute online,per stazione presidiata POS. Il dispositivo permette di stampare biglietti speciali direttamente dal software di gestione del parcheggio Janica.
Stampante termica per ticket e/o ricevute online,per stazione presidiata POS. Il dispositivo permette di stampare biglietti speciali...

ESPAS OFFLINE DISCOUNT PRINTER
Cod. P2010042E
Stampante offline per l'aggiunta di un singolo barcode (sconto a "tempo" per sistemi 20, sconto a "tempo" o "importo" per sistemi 30); compatibile con ticket fanfold e paper roll. Nei sistemi 20 il doppio barcode è compatibile con stazione di uscita con retracter motorizzato. Nei sistemi 30 è compatibile con cassa automatica con lettore ticket motorizzato, stazione di uscita con retracter motorizzato e stazione di uscita con scanner
Stampante offline per l'aggiunta di un singolo barcode (sconto a "tempo" per sistemi 20, sconto a "tempo" o "importo" per sistemi 30);...

TRAFFIC LIGHT PANEL 3 DIGIT DISPLAY MASTER
Cod. P22312M5
Pannello luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde e di 3 cifre per l'indicazione del numero di posti liberi. Il pannello è retroilluminato e dotato di attivazione crepuscolare.
Pannello luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde e di 3 cifre per...

TRAFFIC LIGHT 2-SIDE PANEL IT
Cod. P22316B0
Pannello bifacciale luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è retroilluminato e dotato di attivazione crepuscolare.
Pannello bifacciale luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il...

TRAFFIC LIGHT 2-SIDE PANEL DE
Cod. P22316B1
Pannello bifacciale luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è retroilluminato e dotato di attivazione crepuscolare.
Pannello bifacciale luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il...

TRAFFIC LIGHT 2-SIDE PANEL EN
Cod. P22316B2
Pannello bifacciale luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è retroilluminato e dotato di attivazione crepuscolare.
Pannello bifacciale luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il...

TRAFFIC LIGHT 2-SIDE PANEL ES
Cod. P22316B3
Pannello bifacciale luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è retroilluminato e dotato di attivazione crepuscolare.
Pannello bifacciale luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il...

TRAFFIC LIGHT 2-SIDE PANEL FR
Cod. P22316B4
Pannello bifacciale luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è retroilluminato e dotato di attivazione crepuscolare.
Pannello bifacciale luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il...

TRAFFIC LIGHT PANEL 3 DIGIT DISPLAY SLAVE
Cod. P22319M5
Pannello luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde e di 3 cifre per l'indicazione del numero di posti liberi. Il pannello è retroilluminato e dotato di attivazione crepuscolare.
Pannello luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde e di 3 cifre per...

TOKENS
Cod. P800015
Tokens for ESPAS 10 COIN

ROLL THERMAL PAPER
Cod. P800044
Roll thermal paper (3000 tickets) for entry station

485-TCP/IP CONVERTER KIT
Cod. P800132
The device allows the insertion within a wired TCP/IP network of devices using an RS-485 serial interface. The solution is used in all those realities where it is necessary to transmit serial data through, for example, a local network already present.
The device allows the insertion within a wired TCP/IP network of devices using an RS-485 serial interface. The solution is used in all those...

BC BONUS LAN
Cod. P800136
Il dispositivo BC BONUS, collegato ad un server di parcheggio, consente di assegnare a dei ticket d'ingresso specifici bonus a tempo o monetari. Connessione LAN.
Il dispositivo BC BONUS, collegato ad un server di parcheggio, consente di assegnare a dei ticket d'ingresso specifici bonus a tempo o...

KIT INTERLOCK FOR PARKING
Cod. P800137
Kit for manage interlock function (station between two barriers), useful to prevent queues on the gate or for particularly security requirements. It's usable when a third loop management is required (e.g. motorbike). Includes a loop detector for the second barrier safety loop and a kit of terminals in order to connect the commands of the second barrier.
Kit for manage interlock function (station between two barriers), useful to prevent queues on the gate or for particularly security...

KIT DENEB TO DENEB
Cod. P800138
Additional board used to communicate between two stations in "Two Ways" and "Double Height" configuration. For 30 system only.

RECEIPT PRINTER ROLL PAPER
Cod. P970048
Rotolo carta per stampante ricevute.

TRAFFIC LIGHT PANEL IT
Cod. P975073
Pannello luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è retroilluminato e dotato di attivazione crepuscolare.
Pannello luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è...

TRAFFIC LIGHT PANEL EN
Cod. P975074
Pannello luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è retroilluminato e dotato di attivazione crepuscolare.
Pannello luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è...

TRAFFIC LIGHT PANEL DE
Cod. P975075
Pannello luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è retroilluminato e dotato di attivazione crepuscolare.
Pannello luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è...

TRAFFIC LIGHT PANEL FR
Cod. P975076
Pannello luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è retroilluminato e dotato di attivazione crepuscolare.
Pannello luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è...

TRAFFIC LIGHT PANEL ES
Cod. P975077
Pannello luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è retroilluminato e dotato di attivazione crepuscolare.
Pannello luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è...

TRAFFIC LIGHT PANEL PL
Cod. P975078
Pannello luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è retroilluminato e dotato di attivazione crepuscolare.
Pannello luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è...

TRAFFIC LIGHT PANEL HR
Cod. P975079
Pannello luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è retroilluminato e dotato di attivazione crepuscolare.
Pannello luminoso di indicazione dello stato di capienza del parcheggio. E' provvisto di luci semaforiche rosso e verde. Il pannello è...

KIT POWER SUPPLY NEA LITE / TUVA LITE
Cod. P975093
NEA LITE / TUVA LITE power supply kit: junction box IP56 and PGs, power supply 12VDC din rail mounting

UHF WINDSHIELD TAG BFT
Cod. D141860
TUVA UHF windshield tag BFT

SIGN WITH TRAFFIC LIGHT ENG
Cod. D113708
Capacity system for stan alone installation

PCA B 3
Cod. P120019 00001

TRAFFIC LIGHT PANEL 3 DIGIT DISPLAY MASTER - HORIZONTAL
Cod. P22322M5
Horizontal backlit panel with crepuscular function and indication of: Free/Empty ( Led light Green/Red ), 3 digit for spaces. RS485/RS232 converter, mounting bracket for pole included.
Horizontal backlit panel with crepuscular function and indication of: Free/Empty ( Led light Green/Red ), 3 digit for spaces. RS485/RS232...

AURA ACCESS POINT PANEL
Cod. FP208002

KIT PARKING SERVER
Cod. P800139
Accessories kit for Server including: Ethernet switch 8 ports, RS232/RS485 converter with cable and power supply, 10 proximity RFID cards

KIT POS CLIENT
Cod. P800140
Accessories kit for POS Client including: barcode reader with auto-trigger function for hand-free use, LAN cable 1,5 mt.

ROUTER 4G LTE DUAL SIM EXT.TEMP.
Cod. D114024
Dual SIM (Micro SIM )router with extendet temperature (-40°C to +70°C) , 4G LTE, 2xEthernet port 10/100Mbps, 1 slot MicroSD, 4G/WIFI anntennas, DIN support and power supply
Dual SIM (Micro SIM )router with extendet temperature (-40°C to +70°C) , 4G LTE, 2xEthernet port 10/100Mbps, 1 slot MicroSD, 4G/WIFI...

RADIOMODEM RTX 868MHz (Slave)
Cod. P800141
Modem radio Slave with RS485 interface for data tx without cable connection, to use with COPPIA RADIOMODEM RTX 868MHZ (Master). This device allows, as an example, to exchange data between the Parking server and Traffic light panel. Maximum range is 1500 mtr in case there are no obstacles. Within urban areas the range is limited to 300 mtr. The kit includes: protected IP66 box, support for pole with Dia 60mm, SMA connector and antenna, power supply 12/24VDC.
Modem radio Slave with RS485 interface for data tx without cable connection, to use with COPPIA RADIOMODEM RTX 868MHZ (Master). This device...

COPPIA RADIOMODEM RTX 868MHz (Master)
Cod. P800142
2 Modem radio Master with RS485 interface for data tx without cable connection. This device allows, as an example, to exchange data between the Parking server and Traffic light panel. Maximum range is 1500 mtr in case there are no obstacles. Within urban areas the range is limited to 300 mtr. The kit includes: 2 devices with protected IP66 box, support for pole with Diam. 60mm, SMA connector and antenna, power supply 12/24DC.
2 Modem radio Master with RS485 interface for data tx without cable connection. This device allows, as an example, to exchange data between...

TRAFFIC LIGHT PANEL 3 DIGIT DISPLAY SLAVE - HORIZONTAL
Cod. P22329M5
Horizontal backlit panel with crepuscular function and indication of: Free/Empty ( Led light Green/Red ), 3 digit for spaces. RS485/RS232 converter NOT included. Mounting bracket for pole included.
Horizontal backlit panel with crepuscular function and indication of: Free/Empty ( Led light Green/Red ), 3 digit for spaces. RS485/RS232...

SOFTWARE INSTALLATION
Cod. A200001 20004
The SOFTWARE INSTALLATION service includes the installation of a software module by one of our technicians.

VISTA SEL
Cod. D113722
Function selector for pedestrian door series VISTA SL, SL C, TL

VISTA SEL SW
Cod. D113789
Function selector Vista SW

VIO-M
Cod. P111662
Compact mono-directional activation sensor

HR100-CT
Cod. P111652
Safety and mono-directional activation sensor, infrared, monitored

VIO-DT2
Cod. P111653
Safety and bi-directional activation sensor, dual technology, monitored

VIO-DT1
Cod. P111654
Safety and mono-directional activation sensor, dual technology, monitored

IXIO-DT1
Cod. P111655
Safety and mono-directional activation sensor, dual technology, monitored, programmable c.telecom.

VIO-ST
Cod. P111656
Infrared safety sensor, monitored

4SAFE IR SAFETY SENSOR MONIT.SW/1MOD/700
Cod. P111657 00001
Monitored IR safety sensor for side-hung leaves, 1 module, 700 mm

4SAFE IR SAFETY SENSOR MONIT.SW/2MOD/700
Cod. P111657 00002
Monitored IR safety sensor for side-hung leaves, 2 modules, 700 mm

4SAFE IR SAFETY SENSOR MONIT.SW/2MOD/900
Cod. P111657 00003
Monitored IR safety sensor for side-hung leaves, 2 modules, 900 mm

OA-AXIS T
Cod. P111753
Active infrared sensor for activation and security with safety test

OA-AXIS II
Cod. P111751
Active infrared sensor for activation and security

OA-203C
Cod. P111754
Active infrared sensor for activation and presence

OA-PRESENCE TN
Cod. P111755
Active infrared sensor for security

OA-EDGE T 340 1M
Cod. P111756
Active infrared sensor for security L 340 mm with 1 module with safety test

OA-EDGE T 700 1M
Cod. P111757
Active infrared sensor for security L 700 mm with 1 module with safety test

OA-EDGE T 1200 2M
Cod. P111758
Active infrared sensor for security L 1200 mm with 2 modules with safety test

OT 3
Cod. P111759
Elbow-operated pushbutton, silver

TO2
Cod. D111302
Dual channel 30.875 MHz transmitter with double code. Can be used for controlling a shared gate and a private garage, for example

Timer
Cod. P130024
Weekly programmer for REEL RADIO or external ER-1 receiver

TEO4
Cod. D111363

GHIBLI
Cod. D111879
12 V 4-channel transmitter 433 MHz

TEO2
Cod. D111362

CLIP B 00 R04
Cod. N999522
Wall mounting clip for KLEIO B RCA and MITTO B RCB remote controls. 30 unit pack

CLIP1 B 00 R03
Cod. N999521
Clip for hooking KLEIO B RCA and MITTO B RCB series remote controls to belt or sun visor. Supplied in pack of 30pcs

U-PROG
Cod. P111529
Programmer for radio control units and receivers with possibility of wired or BlueTooth connection

QSG2
Cod. D223040
QSG2 ENCLOSURE 8.5x12x5"

SD BOX
Cod. D223050
SD BOX WITH 2 HOLES DIA. 38

AXXEDO NOISE FILTER
Cod. N999658
noise suppression kit for inductive loads

AXXEDO BOX
Cod. D223078
Panel box for Axxedo control units

VIRGO BAT
Cod. P125008
Set of backup batteries for VIRGO

BT BAT
Cod. P125005
Set of backup batteries for LIBRA C MA, LIBRA C LX, HYDRA N, ARGO, VENERE BT A DIS

CB EOS
Cod. P125006
Set of backup batteries for VENERE D

BT BAT1
Cod. P125007
Emergency battery kit for HYDRA N CPEL, only for external board not compatible with board on motor

ECOSOL CHARGER
Cod. N999477
Battery chargers for ECOSOL BOX and ECOSOL DOUBLE

MCL BT A BAT KIT
Cod. P125038
Set of backup batteries for MICHELANGELO BT A barriers

STOPPY BAT
Cod. P975001
Backup battery kit to allow bollards to stay up in case of no power

A-300 SL BAT
Cod. P125017
Set of backup batteries for A-300 SL series operators

BAT KIT 1
Cod. P120017
Set of backup batteries for GIOTTO series barriers. Not compatible with GIOTTO BT A

SL BAT1
Cod. P125033
SL BAT1 emergency battery kit for DEIMOS ULTRA BT

BBT BAT
Cod. P125020
Set of backup batteries for THALIA and THALIA P

BBV SW 350 MXL
Cod. P111564
Emergency battery kit for Vista SW MXL, compatible with SXL with external installation

BBV SW 260
Cod. P111795
Emergency battery kit VISTA SW 260.

SL BAT2
Cod. P125035
Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.

BBV BATT MODULO VISTA SL
Cod. P111768
Set of backup batteries for VISTA SL

STR
Cod. N190106
Pair of infrared STR sensors for ERIS A30

PRC
Cod. P111041
Pneumatic relay for BIR edge with 1 pressure switch

PRC2
Cod. P111042
Pneumatic relay for BAR edge with 2 pressure switches

EBP
Cod. P123001 00001
230 V electric drop lock

EBP 24
Cod. P123001 00013
24 V solenoid lock, with 230/24 V transformer installable in control panel

ECB SX
Cod. D121017
Left-hand horizontal solenoid lock, 12/24 V

EBPE 52
Cod. P123006 00001
230 V solenoid lock with zero stop resistance, also with release from outside for gates of max thickness 50 mm

EBPE 75
Cod. P123008 00001
230 V solenoid lock with zero stop resistance, also with release from outside for gates of max thickness 75 mm

ECB DX
Cod. D121016
Right-hand horizontal solenoid lock, 12/24 V

ECB VERTICALE
Cod. D121018
Vertical solenoid lock, 12/24 V

EBPE 52 24V
Cod. P123006 00013
EBPE 52 24 V with transformer

EBP 120
Cod. P123001 00004
Drop electric lock + transf. 24/120 V 60 Hz

EBP24 120
Cod. P123001 00019
Drop electric lock + transf. 24/120 V 60 Hz

SCC
Cod. N733392
Release for ELI AC A, ELI BT A and SUB BT with lever key.

CLS
Cod. D610180
Triangular release key l=52 mm

CLS/82
Cod. D610256
Triangular release key for SUB operators l=82 mm

SET/S
Cod. N733069
External release for insulated sectional and overhead doors of thickness up to 50 mm.

SEB
Cod. N733020
External key release for BERMA, FORB, IGEA LB and IGEA LB BT

SCP
Cod. N733502
Release for ELI AC A, ELI BT A and SUB BT with personalized key.

SIBOX
Cod. N574005
Empty wall-mounted safe for external release and control keypad Dimensions 179.5 x 122 x 92 mm

MOX
Cod. N733036
External release system to be inserted in SIBOX safe

BOX
Cod. N574039
Wall cabinet for release with steel cable and electric control; cable not included

SPIRA 2X1
Cod. D110926 00001
Magnetic loop 2 x 1 m

RME 1 BT
Cod. P111274
24 V single channel metal object detector with installation base

RME 2
Cod. P111001 00003
230 V dual channel metal object detector with installation base

U-SDK FULL 8
Cod. P111514 00008
Software for easy integration of U-Link automation devices with external systems. U-SDK is an interpreter that allows system integrators to easily and rapidly implement U-Link commands via short simplified strings. Full licence for 8 plants
Software for easy integration of U-Link automation devices with external systems. U-SDK is an interpreter that allows system integrators to...

U-SDK LIGHT 2
Cod. P111513 00002
Software for easy integration of U-Link automation devices with external systems. U-SDK is an interpreter that allows system integrators to easily and rapidly implement U-Link commands via short simplified strings. Light licence for 2 plants
Software for easy integration of U-Link automation devices with external systems. U-SDK is an interpreter that allows system integrators to...

U-BASE
Cod. P111510
Software for bluetooth programming and managing of control unit, receiver and transmitters. USB key included

U-BASE ANDROID
Cod. P111523
Management and programming software for BFT control and receiver units. Version for Android smartphones and tablets, Bluetooth connection

AXXEDO SCRATCH CARD 4
Cod. P111674
activation code of 4 entry points for Axxedo access control system

AXXEDO SCRATCH CARD 16
Cod. P111675
activation code of 16 entry points for Axxedo access control system

U-BASE CLOUD 10
Cod. P111718

U-SDK FULL 2
Cod. P111514 00002
Software for easy integration of U-Link automation with external systems. U-SDK is an interpreter that allows system integrators easy and rapid implementation of U-Link commands via short simplified strings. Full license for 2 systems
Software for easy integration of U-Link automation with external systems. U-SDK is an interpreter that allows system integrators easy and...

U-SDK LIGHT 8
Cod. P111513 00008
Software for easy integration of U-Link automation with external systems. U-SDK is an interpreter that allows system integrators easy and rapid implementation of U-Link commands via short simplified strings. Light license for 8 systems
Software for easy integration of U-Link automation with external systems. U-SDK is an interpreter that allows system integrators easy and...

AXXEDO RING
Cod. D110979
proximity key holder transponder

AXXEDO CARD WHITE
Cod. D110977
blank proximity card without logo

ALLU
Cod. P800104
Power supply for fixed Ranch E bollards

ALLU K12
Cod. P975069
Power supply for fixed Ranch E bollards

ALLU 2 MAXIMA ULTRA
Cod. P120075
Power supply for ATM LIGHT Kit on Maxima Ultra

DIMA PRO36
Cod. P120088
Foundation template and clamps for installation of Maxima Ultra 36 barriers.

PRV TL T
Cod. P111660
Vista tl anodised closing profile, length 6.8 m

SPRV TL T
Cod. P111661
Profile closing brackets, 5pcs

KIT ML MCL40
Cod. P120072
Spring kit for conversion from Michelangelo 60 to Michelangelo 40

PRV AA SL
Cod. P111681
Leaf attachment profile for Vista SL. L = 2600 mm

PRV AA SLC LEAF ATTACHMENT PROFILE VISTASLC
Cod. P111682
Leaf attachment profile for Vista SL C. L = 2600 mm.

CHN-DRIVE 1
Cod. P800088
Above-ground guide for holding chain (2 m)

FCS MAXIMA 5
Cod. P120033
2 additional limit switches for MAXIMA 30/MAXIMA ULTRA 35

IDROLUX WINTER
Cod. I101615
Hydraulic oil tank for lower temperatures. Always mix with oil of the same colour.

THEKE B PRA 01
Cod. P125018
Metal protection box for ARES and ICARO series sliding operators

Crown MAXIMA U36
Cod. P940095 00000
Cap without lights for Maxima Ultra 36.

Crown MAXIMA U36 INOX
Cod. P940095 00200
Cap without lights for Maxima Ultra 36 INOX.

Crown RGB MAXIMA U36
Cod. P940095 00003
Cap with RGB lights for Maxima Ultra 36. Functions: flashing, traffic light, diagnostics.

Crown RGB MAXIMA U36 INOX
Cod. P940095 00203
Cap with RGB lights for Maxima Ultra 36 Stainless Steel. Functions: flashing, traffic light, diagnostics.

Crown MAXIMA U36 RAL
Cod. P940095 00100
Cap without lights for Maxima Ultra 36. Custom RAL

Crown RGB MAXIMA U36 RAL
Cod. P940095 00103
Cap with RGB lights for Maxima Ultra 36. Custom RAL. Functions: flashing, traffic light, diagnostics.

PRV BR.48
Cod. P111618 00001
Finishing brush 20 mm, length 2.5 m

PRV BR.49
Cod. P111618 00002
Finishing brush 27 mm, length 2.5 m

TSWP 350 XL
Cod. P111568
Profiles Vista SW double, 1.5 m.

TSWP XL 260 PROFILES VISTA SW 260 DUAL
Cod. P111793
Profiles Vista SW double, 1.5 m.

FAF 2R
Cod. P125025

WMP SL SLC
Cod. P111680
Contains 2 crossbeam support profiles of length L = 1 m each

FAF ATM R
Cod. P120054
Adjustable fork for bar model ATM and model ATML

FCS MAXIMA 6-8
Cod. P120034
2 additional limit switches for MAXIMA 60/80

SRV DIN
Cod. P120032
Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply terminals, socket for metal mass detector and standard input/output terminal block
Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply...

FCS MU68
Cod. P120035
2 additional limit switches for Maxima Ultra 6 - 8 m

SPL
Cod. D113050
Pre-heating board with thermostat for 230V hydraulic operators. Not usable with RIGEL 5

SCS 1
Cod. P111376
Serial board for connection to zone and opposing leaves for control units with display While stocks last

SCS WIE
Cod. P111408
Board for connection of SELETTO (E) push-button panel and COMPASS SLIM proximity reader Until stocks last

SCS 1 MA
Cod. P111377
Board for connection to more than two checked photocell copies for DEIMOS BT and ARES While stocks last

SSR5
Cod. D111704
Control card traffic light or pre-heating hydraulic motors AC with Rigel 5

ME BT
Cod. D111761
Control board for 24Vac solenoid lock for 24V automation systems

SCS
Cod. P111323
Serial connection board for HYDRA R

ECOSOL DOUBLE
Cod. D113732
Expansion board with batteries Included

SCHEDA MCL KIT
Cod. P120009
Control board for KIT MCL LIGHT and KIT MCL LAMPO

RAU
Cod. P111449
Wired connection board for BFT plug-in receivers

B EBA BLUE GATEWAY
Cod. P111469
Expansion board for BLUETOOTH connection management

B EBA INPUT/OUTPUT
Cod. P111466
INPUT/OUTPUT expansion board

B EBA WIE DRIVER
Cod. P111467
Expansion card for connection of WIEGAND accessories, compatible with U-Link control units

B EBA RS 485 LINK
Cod. P111468
Expansion board for connection of central units with serial controls management

B EBA BLUE ENTRY SYMBIAN 4
Cod. P111488
BLUE-TOOTH expansion card for Blue Entry system (max 4 Symbian smartphones).

B EBA BLUE ENTRY SYMBIAN 8
Cod. P111489
BLUE-TOOTH expansion card for Blue Entry system (max 8 Symbian smartphones).

B EBA BLUE ENTRY SYMBIAN 16
Cod. P111490
BLUE-TOOTH expansion card for Blue Entry system (max 16 Symbian smartphones).

B EBA RS 485 GATEWAY
Cod. P111530
GATEWAY expansion card for management of RS 485 connection

B EBA TCP/IP GATEWAY
Cod. D113805 00002
Gateway expansion card to connect automation systems in TCP/IP networks via U-Link slot. It manages up to 120 U-Link devices connected via B EBA RS-485 Link.
Gateway expansion card to connect automation systems in TCP/IP networks via U-Link slot. It manages up to 120 U-Link devices connected via B...

S RFLP
Cod. P111409
Reflector and support for wall mounting and mounting on CC post for CELLULA RFL

ACV20
Cod. P903024
Vandal-proof protection for DESME photocells

PHP BI
Cod. P903022
Dual-face adapter for THEA/DESME photocells

MOOVI 130 KIT
Cod. P120002
Support for fitting CELLULA 130 on MOOVI/GIOTTO enclosure in line with boom

KIT BARR RFL
Cod. P120007 00001
Support for fitting CELLULA 130 on MICHELANGELO enclosure in line with boom

KIT BARR RFL
Cod. P903015 00001
Support for fitting RFL on MICHELANGELO enclosure in line with boom

PHP ADA CC
Cod. P903021
Pair of adapters for the installation of THEA/DESME photocells on CC posts

PHP2
Cod. P903019
Pair of double aluminium posts for THEA/DESME series photocells. Height 1038 mm

APL
Cod. P903020
Pair of foundation plates for PHP posts

CSC 50
Cod. P903008
Aluminium column for photocell mod. CELLULA 50 and selector mod. INTRO

CC130
Cod. P903005
Pair of aluminium posts for CELLULA 130 photocells

CC130/2
Cod. P903006
Pair of aluminium posts with double fitting for CELLULA 130 photocells

CSC 130
Cod. P903007
Aluminium post for CELLULA 130 photocell and INTRO selector, plus CC130 post

PFC1
Cod. P903010
Pair of foundation plates for CC50, CC130, CSC50, CSC130 and CC130/2 posts

CC50
Cod. P903004
Pair of aluminium posts for CELLULA 50 and CELLULA RFL photocells

CM RFL
Cod. P903014
CELLULA RFL wall mounting support

CC RFL
Cod. P903013
CELLULA RFL and S RFLP mounting support on CC posts

PHP ADA
Cod. P903025
Pair of adapters for the installation of AKTA photocells on PHP posts

PHP BA1
Cod. P903023
Support for mounting THEA/DESME photocells on Giotto, Moovi and Michelangelo enclosures

PHP
Cod. P903018
Pair of aluminium posts for THEA/DESME series photocells Height 522 mm

PHP3
Cod. P903026
Pair of aluminium columns for Q.bo series selectors. Height 1038 mm

PHP4
Cod. P903027
Pair of aluminum columns of different heights, for Q.bo series selectors and DESME and THEA series photocells. Column for selector: height 1038 mm, column for photocells: height 552 mm
Pair of aluminum columns of different heights, for Q.bo series selectors and DESME and THEA series photocells. Column for selector: height...

CELLULA 130
Cod. P111273
Pair of self-aligning photocells for external application (range 30 m) Power supply 24 V ac/dc

CELLULA 50
Cod. P111272
Pair of built-in adjustable photocells (range 30 m) Power supply 24 V ac

KIT CELLULA 180 AT
Cod. P111460
KIT CELLULA 180 + DCW COVER

KIT FPA1
Cod. P111683
FPA kit with pair of photocells and brackets for Vista

KIT FPA2
Cod. P111685
FPA kit with two pairs photocells and brackets for Vista

KIT FPA MA-I2
Cod. P111687
FPA MA 12 kit with two pairs photocells and brackets for Vista

RB
Cod. P121016
4-channel wall-mounted radio control with rolling code

SPC
Cod. D121611
External button panel with 2 start-stop buttons.

SPC2
Cod. D121612
External button panel with 2 open-close buttons.

SPCE
Cod. D121613
External button panel with mushroom-head emergency button.

SPC3
Cod. D121619
Open stop close button panel.

SELETTO E
Cod. P121013
External digital button panel with metal body and stainless steel keys

INTRO
Cod. P121011
Recessed key switch

PUSH PLATE
Cod. P111677
Activation button

MAGIC SWITCH
Cod. P111676
Activation touch button

TLIGHTS
Cod. P800117
Traffic lights and top covering for totem

RAY X 230V
Cod. D113719 00002
Flashing beacon with built-in antenna for 230 V motors

RAY X 24V
Cod. D113719 00003
Flashing beacon with built-in antenna for 24 V motors

KIT LIGHT1
Cod. P120001 00002
Lights for booms over 4.5 m

KIT LIGHT
Cod. P120001 00001
Lights on boom 3 - 4.5 m

MCL LAMPO KIT
Cod. P120006
Integrated flashing light. The MCL CARD KIT is needed for operation

MCL LIGHT KIT
Cod. P120005 00001
Light kit (6 lights) for boom. For use in conjunction with PCA. The MCL CARD KIT is necessary for operation

TL
Cod. P800039
Traffic lights and top covering for totem

ACOUSTIC DETECTOR
Cod. D113705
Adjustable acoustic detector for sirens

RAY X SA 230V
Cod. D113721 00002
Flashing beacon without antenna for 230 V motors

RAY X SA 24V
Cod. D113721 00003
Flashing beacon without antenna for 24 V motors

PCR
Cod. P123024
Metal guard for RAY X

B 00 R01
Cod. P123026
Metal guard for B LTA

B 00 R02
Cod. P123025
Wall mounting for B LTA series flashing beacons

STOPPY ALARM
Cod. P800075
Anti-theft kit: to be ordered separately, assembled during production

GSM RECEIVER 230V
Cod. D113838 00002
Il sistema permette di comandare l'automatismo da remoto con una chiamata telefonica gratuita. Caratteristiche principali: alimentazione in 230V, programmazione semplificata via sms, accesso consentito fino a 500 numeri diversi, funzione timer, funzionamento in modalità monostabile o bistabile.
Il sistema permette di comandare l'automatismo da remoto con una chiamata telefonica gratuita. Caratteristiche principali: alimentazione in...

CLONIX 2
Cod. D111662
Two-channel receiver with plug 433 MHz rolling code. 128 position memory. 24 Vac power supply.

CLONIX 2 2048
Cod. D111664
Dual channel 433 MHz rolling code plug-in receiver. 2048-position memory 24 Vdc Vac power supply.

CLONIX 2E
Cod. D113674 00001
External dual channel 433 MHz rolling code receiver. 128-position memory. 24 V.

CLONIX 2E 2048
Cod. D113674 00003
Dual channel 433 MHz rolling code plug-in receiver. 2048-position memory 24 Vdc Vac power supply.

CLONIX 4 RTE
Cod. D113718 00002
External 4-channel 433 MHz rolling code receiver. Power relay outputs (16 A 230 V). 230 V.

MOP
Cod. D111713 00001
Accessory for adding an output channel to RTD

ER 1
Cod. P130025
External receiver for REEL RUA series operators. Compatible with PAD series transmitters

AEL 433
Cod. D113632
Antenna for 433 MHz radio remote control with 4 m cable

AEL 30.8
Cod. D113631
Antenna for 30.875 MHz radio remote control with 4 m cable
Sorry, no results were found for your search.