SUB

Underground hydraulic motors for swing gates


Underground hydraulic motors for swing gates

Complete range of underground hydraulic operators for very intensive use, suitable for any type of residential, industrial or multi-residence application.
Compact and sturdy, capable of automating swing gate leaves up to 3.5 metres wide and weighing up to 800 kg.
Available in reversible and non-reversible versions, with or without slowdown during opening and closing and with opening angles up to 180°.

PLUS

The monoblock structure gives the possibility of a very neat installation that is extremely reliable over time.

The closing slowdown guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.

Control unit with programming display and new, simplified scenario-based programming

Technologies
  • The new coding system for direct cloning of remote controls.
    Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
    In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
    Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

Products list
Underground hydraulic motors for swing gates

SUB DX

In-ground 230 V hydraulic operator Triangle key for hinged leaves up to 1.8 m. Manoeuvre time 24 s. Right operator.

Open
Underground hydraulic motors for swing gates

SUB SX

In-ground 230 V hydraulic operator Triangle key for hinged leaves up to 1.8 m. Manoeuvre time 24 s. Left operator.

Open
Underground hydraulic motors for swing gates

SUB R DX

In-ground 230 V irreversible hydraulic operator for swing gates up to 1.8 m with slowdown. Maneuver time 14+slowdown s. Right operator.

Open
Underground hydraulic motors for swing gates

SUB R SX

In-ground 230 V irreversible hydraulic operator for swing gates up to 1.8 m with slowdown. Maneuver time 14+slowdown s. Left operator.

Open
Underground hydraulic motors for swing gates

SUB R UL/CSA DX

In-ground 120 V irreversible hydraulic operator for swing gates up to 3.5 m with slowdown. Maneuver time 14+slowdown s. Right operator.

Open
Underground hydraulic motors for swing gates

SUB R WINTER DX

In-ground 230 V irreversible hydraulic operator for swing gates up to 1.8 m with slowdown. Maneuver time 14+slowdown s. Right operator.

Open
Underground hydraulic motors for swing gates

SUB R WINTER SX

In-ground 230 V irreversible hydraulic operator for swing gates up to 1.8 m with slowdown. Maneuver time 14+slowdown s. Left operator.

Open
Underground hydraulic motors for swing gates

SUB E DX

In-ground 230 V hydraulic operator Non reversing for hinged leaves up to 2.5 m. Manoeuvre time 24 s. Right operator.

Open
Underground hydraulic motors for swing gates

SUB E SX

In-ground 230 V hydraulic operator Non reversing for hinged leaves up to 2.5 m. Manoeuvre time 24 s. Right operator.

Open
Underground hydraulic motors for swing gates

SUB ER DX

In-ground 230 V irreversible hydraulic operator for swing gates up to 2.5 m with slowdown. Maneuver time 14+slowdown s. Right operator.

Open
Underground hydraulic motors for swing gates

SUB ER SX

In-ground 230 V irreversible hydraulic operator for swing gates up to 2.5 m with slowdown. Maneuver time 14+slowdown s. Left operator.

Open
Underground hydraulic motors for swing gates

SUB EL DX

In-ground 230 V hydraulic operator Reversible for hinged leaves up to 3.5 m. Manoeuvre time 33 s. Right operator.

Open
Underground hydraulic motors for swing gates

SUB EL SX

In-ground 230 V hydraulic operator Reversible for hinged leaves up to 3.5 m. Manoeuvre time 33 s. Right operator.

Open
Underground hydraulic motors for swing gates

SUB G DX

In-ground 230 V hydraulic operator Triangle key for hinged leaves up to 1.8 m. Manoeuvre time 33 s. Right operator.

Open
Underground hydraulic motors for swing gates

SUB G SX

In-ground 230 V hydraulic operator Triangle key for hinged leaves up to 1.8 m. Manoeuvre time 33 s. Right operator.

Open
Underground hydraulic motors for swing gates

SUB G UL/CSA DX

In-ground 120 V hydraulic operator Non reversing for hinged leaves up to 3.5 m. Manoeuvre time 33 s. Right operator.

Open
Underground hydraulic motors for swing gates

SUB EG DX

In-ground 230 V hydraulic operator Non reversing for hinged leaves up to 1.8 m. Manoeuvre time 24 s. Right operator.

Open
Underground hydraulic motors for swing gates

SUB EG SX

In-ground 230 V hydraulic operator Non reversing for hinged leaves up to 1.8 m. Manoeuvre time 24 s. Right operator.

Open
Accessories

Recommended accessories.

  • CPS G Cod. N733092 Foundation box designed for fitting the SUB G operator. Foundation box designed for fitting the SUB G operator.

  • BSC Cod. N728002 Arm for installation of SUB out of the gate axis. Arm for installation of SUB out of the gate axis.

  • CLS/82 Cod. D610256 Triangular release key for SUB operators l=82 mm. Triangular release key for SUB operators l=82 mm.

  • CPS SX Cod. N733066 00002 Foundation box designed for fitting the SUB left-hand operator. Foundation box designed for fitting the SUB left-hand operator.

  • CPS DX Cod. N733066 00001 Foundation box designed for fitting the SUB right-hand operator. Foundation box designed for fitting the SUB right-hand operator.

  • FCS SX Cod. N733066 00004 Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf. Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.

  • ME Cod. D111013 Control board for 12Vac solenoid lock for 230V automation systems. Control board for 12Vac solenoid lock for 230V automation systems.

  • FCS DX Cod. N733066 00003 Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf....
    Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.

  • ALCOR N Cod. D113706 00002 Control panel with dip switches and potentiometers for one or two 230V/300W operators for swing gates. Control panel with dip switches and potentiometers for one or two 230V/300W operators for swing gates.

  • ALPHA SD Cod. D113680 00002 Universal control panel with potentiometers for one 230V/500W single-phase operator. Universal control panel with potentiometers for one 230V/500W single-phase operator.

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

Continue
Information

An unexpected error occurred: please reload the page or try again later.