Underground hydraulic motors for swing gates

SUB R WINTER SX

Product code P930012 00010
  • DIMENSIONAL DIAGRAM
technical design SUB

In-ground 230 V irreversible hydraulic operator for swing gates up to 1.8 m with slowdown. Maneuver time 14+slowdown s. Left operator.

PLUS
  • The monoblock structure gives the possibility of a very neat installation that is extremely reliable over time.

  • The closing slowdown guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.

  • Control unit with programming display and new, simplified scenario-based programming

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technical Data
Control unit RIGEL 6
Board power supply 230 V
Motor voltage 230 V
Power input 250 W
Max. width of door/gate wing 1.8 m
Max. weight of door/gate wing 800 kg
Maximum angle 130 °
Cycle time 14+slowdown s
Type of limit switch work time
Slowdown Yes
Locking Open/close hydraulics
Release Non reversing
Impact reaction Hydraulic clutch
Frequency of use very intensive
Protection rating IP67
Environmental conditions -30 ÷ 60 °C
U-Link no
Accessories

Recommended accessories.

  • ALPHA SD Cod. D113680 00002Universal control panel with potentiometers for one 230V/500W single-phase operator.
    Application: control panel for one operator for slide...
    Universal control panel with potentiometers for one 230V/500W single-phase operator.
    Application: control panel for one operator for slide and swing gates, roll-up gates and overhead doors.
    Board power supply: 230V single-phase.
    Operator power supply: 230V single phase 500W max.
    Main features: removable terminal blocks, settings controlled by potentiometers, LED-based fault reporting and incorporated dual channel receiver.
    Main functions: fast closing, pulse blocking, gate open indicator light.
    Compatibility: MIZAR.

  • FCS DX Cod. N733066 00003Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.

  • FCS SX Cod. N733066 00004Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.

  • CPS DX Cod. N733066 00001Foundation box designed for fitting the SUB right-hand operator.Foundation box designed for fitting the SUB right-hand operator.

  • CPS SX Cod. N733066 00002Foundation box designed for fitting the SUB left-hand operator.Foundation box designed for fitting the SUB left-hand operator.

  • CPS G Cod. N733092Weight-bearing foundation box for preparation for assembly of SUB G right and left operator.Weight-bearing foundation box for preparation for assembly of SUB G right and left operator.

  • BSC Cod. N728002Arm for installation of SUB out of the gate axis.Arm for installation of SUB out of the gate axis.

  • ME Cod. D111013Control board for 12Vac solenoid lock for 230V automation systems.Control board for 12Vac solenoid lock for 230V automation systems.

  • CLS/82 Cod. D610256Triangular release key for SUB operators l=82 mm.Triangular release key for SUB operators l=82 mm.

  • ALCOR AC A Cod. D114092 00002Dip switch and potentiometer control panel for one or two 230 V/300 W operators for swing gates.Dip switch and potentiometer control panel for one or two 230 V/300 W operators for swing gates.

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.