Recommended accessories.
SUB R SX
Product code P930012 00006- DIMENSIONAL DIAGRAM
In-ground 230 V irreversible hydraulic operator for swing gates up to 1.8 m with slowdown. Maneuver time 14+slowdown s. Left operator.
PLUS
-
The monoblock structure gives the possibility of a very neat installation that is extremely reliable over time.
-
The closing slowdown guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.
-
Control unit with programming display and new, simplified scenario-based programming
Assistance
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Technical documentation
Technical Data
| Max. weight of door/gate wing | 800 kg |
| Max. width of door/gate wing | 1.8 m |
| Motor voltage | 230 v |
| Type of limit switch | Work time |
| Impact reaction | Hydraulic clutch |
| Slowdown | Yes |
| U-Link | No |
| Control unit | Rigel 6 |
| Board power supply | 230 v |
| Power input | 250 w |
| Maximum angle | 130 ° |
| Cycle time | 14+slowdown s |
| Locking | Open/close hydraulics |
| Release | Triangle key |
| Frequency of use | Very intensive |
| Protection rating | Ip67 |
| Environmental conditions | -10 ÷ 60 °c |
Imperial measurements
The data shown are for information purposes only.
| Max. weight of door/gate wing | 1763.696 lbs |
| Max. width of door/gate wing | 5.905512 ft |
| Motor voltage | 230 v |
| Type of limit switch | Work time |
| Impact reaction | Hydraulic clutch |
| Slowdown | Yes |
| Control unit | Rigel 6 |
| Board power supply | 230 v |
| Power input | 250 w |
| Maximum angle | 130 ° |
| Cycle time | 14+slowdown s |
| Locking | Open/close hydraulics |
| Release | Triangle key |
| Frequency of use | Very intensive |
| Protection rating | Ip67 |
| Environmental conditions | 14 ÷ 140 °f |
Accessories
-
CPS G Cod. N733092 Foundation box designed for fitting the SUB G operator. Foundation box designed for fitting the SUB G operator.
-
BSC Cod. N728002 Arm for installation of SUB out of the gate axis. Arm for installation of SUB out of the gate axis.
-
CLS/82 Cod. D610256 Triangular release key for SUB operators l=82 mm. Triangular release key for SUB operators l=82 mm.
-
CPS SX Cod. N733066 00002 Foundation box designed for fitting the SUB left-hand operator. Foundation box designed for fitting the SUB left-hand operator.
-
CPS DX Cod. N733066 00001 Foundation box designed for fitting the SUB right-hand operator. Foundation box designed for fitting the SUB right-hand operator.
-
FCS SX Cod. N733066 00004 Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf. Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.
-
ME Cod. D111013 Control board for 12Vac solenoid lock for 230V automation systems. Control board for 12Vac solenoid lock for 230V automation systems.
-
FCS DX Cod. N733066 00003 Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf....
Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf. -
ALCOR N Cod. D113706 00002 Control panel with dip switches and potentiometers for one or two 230V/300W operators for swing gates. Control panel with dip switches and potentiometers for one or two 230V/300W operators for swing gates.
-
ALPHA SD Cod. D113680 00002 Universal control panel with potentiometers for one 230V/500W single-phase operator. Universal control panel with potentiometers for one 230V/500W single-phase operator.
