SUB EG DX

Product code P930011 00005

In-ground 230 V hydraulic operator Non reversing for hinged leaves up to 1.8 m. Manoeuvre time 24 s. Right operator.

Main features
  • The monoblock structure gives the possibility of a very neat installation that is extremely reliable over time.

  • The closing slowdown guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.

  • Control unit with programming display and new, simplified scenario-based programming

technical design
Maximum angle 130 °
Environmental conditions -10 ÷ 60 °C
Cycle time 24 s
Interconnectivity no
Type of limit switch work time
Control unit RIGEL 6
Slowdown no
Board power supply 230 V
Locking Open/close hydraulics
Motor voltage 230 V
Release Non reversing
Power consumption 250 W
Impact reaction Hydraulic clutch
Max. width of door/gate wing 1.8 m
Frequency of use very intensive
Max. weight of door/gate wing 800 kg
Protection rating IP67
Imperial measurements

The data shown are for information purposes only.

Maximum angle 130 °
Environmental conditions 14 ÷ 140 °F
Cycle time 24 s
Interconnectivity no
Type of limit switch work time
Control unit RIGEL 6
Slowdown no
Board power supply 230 V
Locking Open/close hydraulics
Motor voltage 230 V
Release Non reversing
Power consumption 250 W
Impact reaction Hydraulic clutch
Max. width of door/gate wing 5 ft
Frequency of use very intensive
Max. weight of door/gate wing 1763 lbs
Protection rating IP67
ALCOR AC A
D114092 00002

Control unit with on-board receiver - no display - Standard terminal block

ALPHA SD
D113680 00002

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide and swing gates, roll-up gates and overhead doors Card power supply: 230 V single-phase Operator power supply: 230 V single-phase, max. 500 W Main features: removable terminal blocks, settings controlled by potentiometers, LED-based fault reporting and incorporated dual channel receiver Main functions: fast closing, pulse blocking, gate open indicator light Compatibility: MIZAR

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide...

CLS/82
D610256

Triangular release key for SUB operators l=82 mm

FCS DX
N733066 00003

Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf

FCS SX
N733066 00004

Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf

CPS DX
N733066 00001

Foundation box designed for fitting the SUB right-hand operator

CPS SX
N733066 00002

Foundation box designed for fitting the SUB left-hand operator

CPS G
N733092

Weight-bearing foundation box for preparation for assembly of SUB G right and left operator

BSC
N728002

Arm for installation of SUB out of the gate axis

ME
D111013

Control board for 12Vac solenoid lock for 230V automation systems

COMPACTA A20-180
P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

RADIUS LED AC A R0
D114094 00002

Flashing light without incorporated antenna for motors with 230 V power supply.

RADIUS LED AC A R1
D114093 00002

Flashing light with incorporated antenna for motors with 230 V power supply.

Swinging gates
Hydraulic automation systems for swinging gates
Show
Bft Easy Set
Installing automation for a swing gate has never been easier!
Show

An unexpected error occurred: please reload the page or try again later.