To access your reserved area you must fill out the registration form by following a simple wizard.
After clicking the button below, please enter your details and send the request.
ATTENTION: This operation applies only for the country from where you are registering. To access the Reserved Area from a different country you must do a new registration.
Complete range of underground hydraulic operators for very intensive use, suitable for any type of residential, industrial or multi-residence application.
Compact and sturdy, capable of automating swing gate leaves up to 3.5 metres wide and weighing up to 800 kg.
Available in reversible and non-reversible versions, with or without slowdown during opening and closing and with opening angles up to 180°.
The monoblock structure gives the possibility of a very neat installation that is extremely reliable over time.
The closing slowdown guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.
Control unit with programming display and new, simplified scenario-based programming
The new coding system for direct cloning of remote controls.
Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For fast and safe programming.
EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa.
Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated.
Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc.
With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
In-ground 230 V hydraulic operator Triangle key for hinged leaves up to 1.8 m. Manoeuvre time 24 s. Right operator.
OpenIn-ground 230 V irreversible hydraulic operator for swing gates up to 1.8 m with slowdown. Maneuver time 14+slowdown s. Right operator.
OpenIn-ground 230 V hydraulic operator Non reversing for hinged leaves up to 2.5 m. Manoeuvre time 24 s. Right operator.
OpenIn-ground 230 V irreversible hydraulic operator for swing gates up to 2.5 m with slowdown. Maneuver time 14+slowdown s. Right operator.
OpenIn-ground 230 V hydraulic operator Reversible for hinged leaves up to 3.5 m. Manoeuvre time 33 s. Right operator.
OpenIn-ground 230 V hydraulic operator Triangle key for hinged leaves up to 1.8 m. Manoeuvre time 33 s. Right operator.
OpenRecommended accessories.
ALPHA SD Cod. D113680 00002Universal control panel with potentiometers for one 230V/500W single-phase operator.
Application: control panel for one operator for slide...
Universal control panel with potentiometers for one 230V/500W single-phase operator.
Application: control panel for one operator for slide and swing gates, roll-up gates and overhead doors.
Board power supply: 230V single-phase.
Operator power supply: 230V single phase 500W max.
Main features: removable terminal blocks, settings controlled by potentiometers, LED-based fault reporting and incorporated dual channel receiver.
Main functions: fast closing, pulse blocking, gate open indicator light.
Compatibility: MIZAR.
FCS DX Cod. N733066 00003Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.
FCS SX Cod. N733066 00004Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.
CPS DX Cod. N733066 00001Foundation box designed for fitting the SUB right-hand operator.Foundation box designed for fitting the SUB right-hand operator.
CPS SX Cod. N733066 00002Foundation box designed for fitting the SUB left-hand operator.Foundation box designed for fitting the SUB left-hand operator.
CPS G Cod. N733092Weight-bearing foundation box for preparation for assembly of SUB G right and left operator.Weight-bearing foundation box for preparation for assembly of SUB G right and left operator.
BSC Cod. N728002Arm for installation of SUB out of the gate axis.Arm for installation of SUB out of the gate axis.
ME Cod. D111013Control board for 12Vac solenoid lock for 230V automation systems.Control board for 12Vac solenoid lock for 230V automation systems.
CLS/82 Cod. D610256Triangular release key for SUB operators l=82 mm.Triangular release key for SUB operators l=82 mm.
ALCOR AC A Cod. D114092 00002Dip switch and potentiometer control panel for one or two 230 V/300 W operators for swing gates.Dip switch and potentiometer control panel for one or two 230 V/300 W operators for swing gates.
