THALIA BT A
Control panel with display for one or two 24V electromechanical operators used on 230V swing gates. There are two power modules, which are interchangeable and can operate all motors. The radio receiver is incorporated and the memory of the remote controls is removable and expandable. It has an anti-crushing system based on D-Track technology, it controls the slowing down when opening and closing and has an electronic self-learning function. The main functions include automatic closing, fast closing, partial opening and hold-to-run operation. This panel can be programmed using Bluetooth or remotely via wifi/GSM using a dedicated app. The product complies with the new energy efficiency regulations and therefore has a power consumption on standby of less than 0.5 W.
主要功能
Modular: with the additional modules you can offer more installation options to meet the requirements of a wider range of customers. The new smart board can, if necessary, provide greater electrical power for operating larger motors or motors which operate in demanding conditions
Connectible: with the dual connector, you can connect a gateway and leave it permanently connected, using the second slot for harnessing the full potential of the B-EBA family of cards
Advanced: the U-LINK communication protocol is technologically advanced and can now communicate with the cloud and modern data communications technologies. It is very fast and reactive, meaning it can communicate data bi-directionally and it supports OTA technology which means that firmware updates can be scheduled remotely
Portable: the memory capacity for remote controls has been expanded from 64 to 128 positions but, if needed, the 2,048-position module can be selected for managing installations with a large number of stored remote controls. The memory can be removed and inserted into a new motherboard without losing any remote controls or the stored list of parameters and logic
Spacious: the box housing the electronics is completely new. There is more room for maintenance, wiring is quicker and easier with the new system with seals, the battery pack for emergency operation can be fitted into the box and the wall mounting system has been revised and simplified
94% less power consumption in standby mode, resulting in 69.82 kWh saved annually. Energy consumption of accessories connected to the board is not counted.
技术
Evoluzione del protocollo di comunicazione U-link, U-link 2.0 mantiene una robusta protezione dei dati, l’approccio aperto che le consente di adattarsi a diversi linguaggi di comunicazione e la sua scalabilità che non pone limiti al collegamento di oggetti (B-eba) al network. Al tempo stesso evolve consentendo di inviare ma anche ricevere informazioni dalla centrale realizzando una comunicazione bi-direzionale. Supporta inoltre la tecnologia OTA che consente di aggiornare da remoto il firmware. Grazie a questo nuovo protocollo, più performante, sarà possibile programmare la centrale usando una specifica app e gestire anche molte informazioni sia in modalità locale (bluetooth) che da remoto (wifi / GSM), migliorando l’esperienza d’uso.
EasyAXS is the new connectivity solution which boosts the potential of BFT products and services to make access automations smarter and easier to use for both installers and end users. BFT solutions are a great step forward for the access sector. Installers and end users can enjoy from connectivity benefits through the reliable, secure and convenient system.
技术精确、安全、可靠 BFT公司的24V技术，可对关门和开门的放缓进行精确调整，确保达到最佳性能。 安全是另一个重要方面，确保在有障碍时立即停止和逆转行程。 该技术的高效是产品可靠性的保证。
安全运行的必要推力。 这种智能扭矩管理系统基于BFT电控单元微处理器技术。 通过从不同指标获取数据，将更新执行动作所需的推力水平。 此外，D-Track还让安装人员更容易准备法律规定的认证。 传统电控单元不"读取"栅栏门的精确位置，因此采用恒定的推力水平，但不确保在开门和关门的操作中长时间保持稳定的灵敏度。 BFT公司的装置则记录栅栏门或大门由于温度不同或磨损而发生的最细微力度变化，不断向电机提供最佳扭矩。 传统电控单元将不能检测所需推力的变化，并有可能警示实际上并不存在的障碍物。 因此，无论天气、温度条件或机械磨损的程度如何，BFT系统都能够保证系统达到最大安全性，运作完美。
U-Security is a new technology from BFT which, in addition to incorporating a new encrypted rolling code transmission, also incorporates the functionalities of the Er-Ready system and introduces a new procedure for programming BFT remote controls by scanning a QR code. The new rolling code system has an encryption key which masks the code and prevents the BFT remote controls from being cloned by third-party models. All products which have this technology integrate the coding system to directly clone remote controls (Er-Ready) and are therefore all REPLAY. In addition, with U-Security it is also possible to add remote controls to a BFT receiver and program them using the QR code which is printed on the cover of each Mitto C, using the dedicated app.
产品列表
配件
EBD
P111821
BBT BAT CBOX DUO
P125052
BBT BAT CBOX FLAT
P125053
Emergency battery kit for FLAT series panels, complete with dedicated box, wiring and power supply card. Version for external installation,...