THALIA BT A80 DUO

产品代码 D114215 00002 国际代码 2614324

用于平开闸门的1或2个24伏操作器的控制面板，适合高度复杂的系统应用：用于1或2个24V平开门电机的控制面板控制板电源：230V 单相电机电源：24Vdc 每个电机最大240W 主要特点：带标准颜色的可拆卸接线端子，编程显示屏，内置双通道接收器，D-Track防挤压系统，开启和关闭减速和电子自学习主要特点：自动关闭，快速关闭，部分开启，点动操作，直接连接驱动电磁锁和电磁铁，直接连接边缘8K2。兼容: LIBRA C MA, LIBRA C LX, LIBRA, LIBRA R, LIBRA MA R

转至手册符合性声明

主要功能

Modular: with the additional modules you can offer more installation options to meet the requirements of a wider range of customers. The new smart board can, if necessary, provide greater electrical power for operating larger motors or motors which operate in demanding conditions

Connectible: with the dual connector, you can connect a gateway and leave it permanently connected, using the second slot for harnessing the full potential of the B-EBA family of cards

Advanced: the U-LINK communication protocol is technologically advanced and can now communicate with the cloud and modern data communications technologies. It is very fast and reactive, meaning it can communicate data bi-directionally and it supports OTA technology which means that firmware updates can be scheduled remotely

Portable: the memory capacity for remote controls has been expanded from 64 to 128 positions but, if needed, the 2,048-position module can be selected for managing installations with a large number of stored remote controls. The memory can be removed and inserted into a new motherboard without losing any remote controls or the stored list of parameters and logic

Spacious: the box housing the electronics is completely new. There is more room for maintenance, wiring is quicker and easier with the new system with seals, the battery pack for emergency operation can be fitted into the box and the wall mounting system has been revised and simplified

94% less power consumption in standby mode, resulting in 69.82 kWh saved annually. Energy consumption of accessories connected to the board is not counted.

技术

Evoluzione del protocollo di comunicazione U-link, U-link 2.0 mantiene una robusta protezione dei dati, l’approccio aperto che le consente di adattarsi a diversi linguaggi di comunicazione e la sua scalabilità che non pone limiti al collegamento di oggetti (B-eba) al network. Al tempo stesso evolve consentendo di inviare ma anche ricevere informazioni dalla centrale realizzando una comunicazione bi-direzionale. Supporta inoltre la tecnologia OTA che consente di aggiornare da remoto il firmware. Grazie a questo nuovo protocollo, più performante, sarà possibile programmare la centrale usando una specifica app e gestire anche molte informazioni sia in modalità locale (bluetooth) che da remoto (wifi / GSM), migliorando l’esperienza d’uso.

EasyAXS is the new connectivity solution which boosts the potential of BFT products and services to make access automations smarter and easier to use for both installers and end users. BFT solutions are a great step forward for the access sector. Installers and end users can enjoy from connectivity benefits through the reliable, secure and convenient system.

技术精确、安全、可靠 BFT公司的24V技术，可对关门和开门的放缓进行精确调整，确保达到最佳性能。安全是另一个重要方面，确保在有障碍时立即停止和逆转行程。该技术的高效是产品可靠性的保证。

安全运行的必要推力。这种智能扭矩管理系统基于BFT电控单元微处理器技术。通过从不同指标获取数据，将更新执行动作所需的推力水平。此外，D-Track还让安装人员更容易准备法律规定的认证。传统电控单元不"读取"栅栏门的精确位置，因此采用恒定的推力水平，但不确保在开门和关门的操作中长时间保持稳定的灵敏度。 BFT公司的装置则记录栅栏门或大门由于温度不同或磨损而发生的最细微力度变化，不断向电机提供最佳扭矩。传统电控单元将不能检测所需推力的变化，并有可能警示实际上并不存在的障碍物。因此，无论天气、温度条件或机械磨损的程度如何，BFT系统都能够保证系统达到最大安全性，运作完美。

U-Security is a new technology from BFT which, in addition to incorporating a new encrypted rolling code transmission, also incorporates the functionalities of the Er-Ready system and introduces a new procedure for programming BFT remote controls by scanning a QR code. The new rolling code system has an encryption key which masks the code and prevents the BFT remote controls from being cloned by third-party models. All products which have this technology integrate the coding system to directly clone remote controls (Er-Ready) and are therefore all REPLAY. In addition, with U-Security it is also possible to add remote controls to a BFT receiver and program them using the QR code which is printed on the cover of each Mitto C, using the dedicated app.

技术数据表

电解锁	•
用定时器打开行人门	•
启动	•
光传感器	•
互联性	否
电磁锁	•
闪光灯	•
交通灯控制	•
安全触板	•
最大输出	180+180 W
维护	•
迎宾灯	•
可配置 AUX 1	24V - 1A
打开	•
电阻触板	•
电路板电源	220-230 V
闪烁 + 维护	•
区域灯	•
关闭	•
测试光电眼	•
最多 n 个发射器	128
楼梯灯	•
打开行人门	•
测试安全触板	•
编程	显示器
待机功耗	< 0.5 W
门的状态	•
开门警报	•
电磁锁	•
用定时器打开	•
停止	•
电源配件	24V - 0.5A
开门警示灯	•