GIOTTO BT A ULTRA36 230V50 RAL PERS

Product code P940100 00102

Barrier with 24 V power supply for opening up to 4 m and opening time 2.2 s. Impact resistance by means of encoder. Special RAL colour.

Recommendation

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies
technical design
Clear opening 4 m
Control unit MERAK GIOTTO ULTRA 36
Power supply 120 V
Motor power supply 24 V
Max. power consumption 300 W
Min. opening time 2.2 s
Type of limit switch Electromechanical
Slowdown Yes
Impact reaction encoder
Emergency release Personal key
Case treatment zinc coating + powder coating
Frequency of use very intensive
Environmental conditions -20÷55 °F
Protection rating IP54
Barrier weight 41 kg
Interconnectivity Yes
Imperial measurements

The data shown are for information purposes only.

Clear opening 13 ft
Control unit MERAK GIOTTO ULTRA 36
Power supply 120 V
Motor power supply 24 V
Max. power consumption 300 W
Min. opening time 2 s
Type of limit switch Electromechanical
Slowdown Yes
Impact reaction encoder
Emergency release Personal key
Case treatment zinc coating + powder coating
Frequency of use very intensive
Environmental conditions -20÷55 °C
Protection rating IP54
Barrier weight 90 lbs
Interconnectivity Yes
BOOM ES30
P120104 00001

Aluminium bar for 3 m wide openings. Rubber strips and lights not included.

BOOM ES40
P120104 00002

Aluminium bar for 4 m wide openings. Rubber strips and lights not included.

BOOM ES50
P120104 00003

Aluminium bar for 5 m wide openings. Rubber strips and lights not included.

BOOM ES60
P120104 00004

Aluminium bar for 6 m wide openings. Rubber strips and lights not included.

PCA ES N3
P120117 00001

Lower and upper protective rubber strip kit for 3 m BOOM ES. Blanking plugs and fastening clips for lights included.

PCA ES N4
P120117 00002

Lower and upper protective rubber strip kit for 4 m BOOM ES. Blanking plugs and fastening clips for lights included.

PCA ES N5
P120117 00003

Lower and upper protective rubber strip kit for 5 m BOOM ES. Blanking plugs and fastening clips for lights included.

OMEGA ES
P120103

Barrier clamp, casing for hand protection and screws for BOOM ES on Giotto Ultra 36. Barrier not included.

LIGHT PS/ES 30-IP67
P120089 20001

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 3 metres long. Power supply unit excluded.

LIGHT PS/ES 40-IP67
P120089 20002

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 4 metres long. Power supply unit excluded.

LIGHT PS/ES 50-IP67
P120089 20003

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 5 metres long. Power supply unit excluded.

LIGHT PS/ES 60-IP67
P120089 20004

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 6 metres long. Power supply unit excluded.

GT BOARD
P120116

Power supply unit for LIGHT PS/ES lights for Giotto Ultra 36

BOOM PS30
P120087 00001

Aluminium bar, opening L = 3 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM PS40
P120087 00002

Aluminium bar, opening L = 4 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM PS50
P120087 00003

Aluminium bar, opening L = 5 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

OMEGA PS GIOTTO ULTRA 36
P120100

Barrier clamp, casing for hand protection and screws for BOOM PS on Giotto Ultra 36. Barrier not included.

BTM-SKIRT
P120085

Lower skirt for BOOM PS booms. Module length L = 2 m.

BRACKET SKIRT
P120095

Connection bracket between barrier body and simple (BTM SKIRT) or double (FULL SKIRT) aluminium rack.

FAF 2
P120023

Rest fork for booms. For bolting to ground.

ADJ-FOOT
P120093

Suspended cushioned telescopic supporting foot for BOOM PS booms.

GIOTTO M BG BAT KIT
P120074

Buffer battery kit for Giotto BT A series barrier

COMPACTA A20-180
P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

RME 1 BT
P111274

24 V single channel metal object detector with installation base

BMC A
P903031

Support for mounting COMPACTA series photocells on wall and on Giotto, Moovi and Michelangelo barriers

CBO
D730251

Anchor base for MOOVI and GIOTTO series barriers

FAF UNI R
P120080

Universal adjustable fork for all rods; recommended with installation of FULL SKIRT accessory.

LOOP DETECTOR PRO
P111786

Metal object detector, 2 channels, 24 VDC/AC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level, boost function for increasing sensitivity, direction of travel management

Metal object detector, 2 channels, 24 VDC/AC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity...

RME 2
P111001 00003

230 V dual channel metal object detector with installation base

An unexpected error occurred: please reload the page or try again later.