To access your reserved area you must fill out the registration form by following a simple wizard.
After clicking the button below, please enter your details and send the request.
ATTENTION: This operation applies only for the country from where you are registering. To access the Reserved Area from a different country you must do a new registration.
Range of 24V sliding gate operators for intensive use with leaves up to 1500 kg, maximum leaf speed 12 m/min.
Release lever with personalised key: the release lever simplifies motor release and the personalized key ensures its uniqueness, for better safety
Front screws: this arrangement of the casing screws offers ease and convenience during installation and maintenance, even when there is limited space.
A precise, safe and reliable technology.
Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening.
Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles.
The efficiency of the technology is a guarantee of the product's reliability.
The new coding system for direct cloning of remote controls.
Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
The thrust required to operate safely.
A smart torque management system based on the microprocessor technology of BFT control units.
Acquiring data from several indicators, it updates the level of thrust required to perform the operation.
D-Track also facilitates the installer in providing for the certifications required by law.
Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.
BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor.
A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles.
The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.
For fast and safe programming.
EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa.
Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated.
Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc.
With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
Recommended accessories.
CP Cod. D221073plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
Max. load capacity 600 kg.plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
Max. load capacity 600 kg.
CVZ-S Cod. N999320steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
Max. load capacity 800 kg.steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
Max. load capacity 800 kg.
CVZ Cod. D571053steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports.
Max. load capacity 1000 kg.steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports.
Max. load capacity 1000 kg.
CFZ Cod. D571054galvanized steel rack, 4-module, cross-section 22 x 22 mm, length 2 m, welding.
Max. load capacity 2000 kg.galvanized steel rack, 4-module, cross-section 22 x 22 mm, length 2 m, welding.
Max. load capacity 2000 kg.
SFI Cod. N999156Base plate for ARES and ICARO (supplied with operator).Base plate for ARES and ICARO (supplied with operator).
SL BAT2 Cod. P125035Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.
THEKE B PRA 01 Cod. P125018Metal protection box for ARES and ICARO series sliding operators.Metal protection box for ARES and ICARO series sliding operators.
