Accessories

EBP
P123001 00001

230 V electric drop lock

EBP 24
P123001 00013

24 V solenoid lock, with 230/24 V transformer installable in control panel

ECB SX
D121017

Left-hand horizontal solenoid lock, 12/24 V

EBPE 52
P123006 00001

230 V solenoid lock with zero stop resistance, also with release from outside for gates of max thickness 50 mm

EBPE 75
P123008 00001

230 V solenoid lock with zero stop resistance, also with release from outside for gates of max thickness 75 mm

EBPE 52 24V
P123006 00013

EBPE 52 24 V with transformer

EBP 120
P123001 00004

Drop electric lock + transf. 24/120 V 60 Hz

EBP24 120
P123001 00019

Drop electric lock + transf. 24/120 V 60 Hz

ECB DX
D121016

Right-hand horizontal solenoid lock, 12/24 V

ECB VERTICALE
D121018

Vertical solenoid lock, 12/24 V

KIT ATM LIGHT 8 R/G 2W
P120077 00003

Red-green LED lights kit for fitting on ATML bars up to 8 m.

KIT ATM LIGHT 5 R/G 2W
P120077 00002

Red-green LED lights kit for fitting on ATM bars up to 5m.

KIT ATM LIGHT 3 R/G 2W
P120077 00001

Red-green LED lights kit for fitting on ATM bars up to 3m.

LIGHT PS 30-B
P120089 10001

High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 3 metres long. Power supply unit excluded.

LIGHT PS/ES 30-IP67
P120089 20001

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 3 metres long. Power supply unit excluded.

LIGHT PS 40-B
P120089 10002

High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 4 metres long. Power supply unit excluded.

LIGHT PS/ES 40-IP67
P120089 20002

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 4 metres long. Power supply unit excluded.

LIGHT PS 50-B
P120089 10003

High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 5 metres long. Power supply unit excluded.

LIGHT PS/ES 50-IP67
P120089 20003

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 5 metres long. Power supply unit excluded.

LIGHT PS/ES 60-IP67
P120089 20004

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 6 metres long. Power supply unit excluded.

LIGHT PS 60-B
P120089 10004

High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 6 metres long. Power supply unit excluded.

PCA N8
P120028 00005

Top and bottom rubber cover profile for booms of 8 m max.

BTM-SKIRT
P120085

Lower skirt for BOOM PS booms. Module length L = 2 m.

FULL-SKIRT
P120086

Full skirt (top and bottom) for BOOM PS booms. Module length L = 2 m. Does not include SKIRT BRACKET required for anchoring the first module to the barrier body.

Full skirt (top and bottom) for BOOM PS booms. Module length L = 2 m. Does not include SKIRT BRACKET required for anchoring the first module...

FULL-SKIRT PRO
P120105

Full symmetrical rack (top and bottom) for BOOM PS barriers. Module length L = 2 m. Does not include BRACKET SKIRT PRO required for anchoring the first module to the barrier body.

Full symmetrical rack (top and bottom) for BOOM PS barriers. Module length L = 2 m. Does not include BRACKET SKIRT PRO required for...

BRACKET SKIRT
P120095

Connection bracket between barrier body and simple (BTM SKIRT) or double (FULL SKIRT) aluminium rack.

BRACKET SKIRT PRO 68 DOUBLE PB
P120106

Connection bracket between barrier body and rack FULL SKIRT-PRO when using the KIT-PB Double Xtreme 68 fork lock.

ADJ-FOOT
P120093

Suspended cushioned telescopic supporting foot for BOOM PS booms.

PS JOINT
P120113

Joint for BOOM PS booms.

KIT ART90 PS
P120092

Kit for 90° articulated bar. Excludes bar, bar connector, LIGHT PS lighting. Compatible with BOOM PS booms.

BRACKET FRC
P120090

Anchoring bracket for RST-ATM skirts. Only compatible with OMEGA FRC ATML U lock

ATM30 180° RG
P120063

Articulated bar 180 ° 3 m with lights R/G

ACTR
N999608

Pack of 12 additional reflective labels (1 pack already included with each boom)

PCA N5
P120028 00003

Top and bottom rubber cover profile for booms of 5 m max.

PCA ES N3
P120117 00001

Lower and upper protective rubber strip kit for 3 m BOOM ES. Blanking plugs and fastening clips for lights included.

PCA ES N4
P120117 00002

Lower and upper protective rubber strip kit for 4 m BOOM ES. Blanking plugs and fastening clips for lights included.

PCA ES N5
P120117 00003

Lower and upper protective rubber strip kit for 5 m BOOM ES. Blanking plugs and fastening clips for lights included.

PCA N4
P120028 00002

Top and bottom rubber cover profile for booms of 4 m max.

ART 90 Q
N728051

90 ° articulated joint for Moovi and Giotto booms. Max 4m clear passage.

PCA N6
P120028 00004

Top and bottom rubber cover profile for booms of 6 m max.

ATM30 180° RG
P120063 00001

Articulated bar 180 ° 3 m with lights R/G

ATM30 180°
P120110 00001

Articulated barrier with 3 m rise, 180° opening. Does not includes lights and rubber.

ATM50 180° RG
P120064 00001

Articulated bar 180 ° 5 m with lights R/G

ATM50 180°
P120110 00002

5 m articulated bar fitted, 180 ° opening. Lights and rubber not included.

OMEGA AT 70
N999607

Accessories pack for AT 704/706

OMEGA PS MAXIMA U36
P120084 00000

Single lock for protective finger trapping casing and screws for MAXIMA ULTRA 36. BOOM PS bar excluded.

OMEGA FRA PS MAXIMA U36
P120094 00000

Resettable impact protection connector (manual) for Maxima Ultra 36 barrier. BOOM PS bar excluded.

OMEGA AQ 6
N999606

Accessories pack for AQ 6 boom

OMEGA ATM U35
P120062 00001

Single clamping for ATM bar for MAXIMA ULTRA 35. Bar not included.

OMEGA PS GIOTTO ULTRA 36
P120100

Barrier clamp, casing for hand protection and screws for BOOM PS on Giotto Ultra 36. Barrier not included.

ATM50 90° RG
P120066 00001

Articulated bar 90 ° 5 m with lights R/G

ATM50 90°
P120109 00002

Articulated barrier with 5 m rise, 90° opening. Does not includes lights and rubber.

ATM30 90° RG
P120065 00001

Articulated bar 90 ° 3 m with lights R/G

ATM30 90°
P120109 00001

Articulated barrier with 3 m rise, 90° opening. Does not includes lights and rubber.

ATM ARTICULATED JOINT + TIE ROD KIT
P120073

Kit for 90° articulated bar. Does not includes lights and rubber.

ZFAF2
P120026

Additional anchor plates for cementing FAF2 forks to ground.

PCA N3
P120028 00001

Top and bottom rubber cover profile for booms of 3 m max.

PRM
P120031

Hand protection kit against cutting, for MOOVI

OMEGA ATM FRA U35 IMPACT PROTECTION CONNECTOR
P120071 00001

Single clamping for ATM bar for Maxima Ultra 35

PCA ATM 8
P120053 00003

Protection rubber (black) for fitting on bars from L = 6÷8 m.

MLR2.5
P120056

Red spring - MAXIMA Utra 35 Ref. spring table

MLB3
P120057

Blue spring - MAXIMA Ultra 35 Ref. spring table

MLV5
P120058

Green spring - MAXIMA Ultra 35 Ref. spring table

OMEGA ATML
P120044 00001

Single clamping, hand guard and screws for ATML bar on MAXIMA 60/80. Bar not included.

MLC9.5
P120061

Purple spring - Maxima Ultra 68. See springs table

MLC9
P120060

Yellow spring - Maxima Ultra 68. Ref. spring table

MLC7.5
P120059

White spring - MAXIMA Ultra 68. Ref. spring table

ATML60
P120041 00001

Aluminium bar L = 6 m Ø92 mm. Lights and rubber not included. Completely protected by new polystyrene packaging.

OMEGA FRC ATML
P120045 00001

New fork clamping for ATML bar on barrier model. MAXIMA 60/80. Bar not included.

RST ATM
P120049

Aluminium rack. Price for 3 metres. Suspended foot not included. Compatible with ATML and ATM model bars.

GA ATM
P120050

Adjustable suspended foot, powder coated cataphoresis treated.

PCA ATM 5
P120053 00002

Rubber protection (red) for fitting on bar L = 5 m max.

PCA ATM 3
P120053 00001

Rubber protection (red) for fitting on bar L = 3 m max.

ATM50 180° L
P120040 00002

5 m articulated bar fitted, 180 ° opening, with lights.

ATM30 180° L
P120040 00001

3 m articulated bar fitted, 180 ° opening, with lights.

ATM50 180°
P120039 00002

5 m articulated bar fitted, 180 ° opening. Lights and rubber not included.

ATM30 180°
P120039 00001

3 m articulated bar fitted, 180 ° opening. Lights and rubber not included.

ATM30 90°
P120037 00001

3 m articulated bar fitted, 90 ° opening. Lights and rubber not included.

ATM50 90° L
P120038 00002

5 m articulated bar 90 ° opening, with lights and bar fitted.

ATM30 90° L
P120038 00001

3 m articulated bar 90 ° opening, with lights and bar fitted.

ATM50 90°
P120037 00002

5 m articulated bar fitted, 90 ° opening. Lights and rubber not included.

OMEGA ATM FRA
P120048 00001

Fracture system clamping for bar ATM

OMEGA AT
P120043 00001

Single lock, hand protection casing and screws for ATM barrier on Maxima 30. Barrier not included.

OMEGA FRC ATML U
P120047 00001

Fork clamping for ATML bar on barrier model. MAXIMA 68 ULTRA. Bar not included.

OMEGA ATML U
P120046 00001

Single clamping, hand guard and screws for ATML bar on MAXIMA 68 ULTRA. Bar not included.

IS ATML
P120078

Internal reinforcement for ATML rods

HYPHEN PS
P120091

Internal reinforcement/joint for BOOM PS booms. Already included in the Maxima Ultra 36 XL barriers but recommended for barriers L >= 5 m with or without accessories.

Internal reinforcement/joint for BOOM PS booms. Already included in the Maxima Ultra 36 XL barriers but recommended for barriers L >= 5 m...

HYPHEN PS PRO
P120108

Internal reinforcement for BOOM PS booms L=175 cm. Increases the rigidity of the bar. Recommended for use in particularly windy areas.

EBB KIT ATML
P120079

Electric lock for ATML rods to be installed on an FAF UNI R adjustable fork.

FAF UNI R
P120080

Universal adjustable fork for all rods; recommended with installation of FULL SKIRT accessory.

MLC11
P120081

Violet spring - Maxima Ultra 68. Ref. spring table

CVZ-S
N999320

steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports attachment Max. load capacity 800 kg.

CVZ
D571053

steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw-fitted on supports attachment Max. load capacity 1000 kg.

CP
D221073

plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots attachment Max. load capacity 600 kg.

CFZ
D571054

galvanized steel rack, 4-module, cross-section 22 x 22 mm, length 2 m, welding attachment Max. load capacity 2000 kg.

CFZ6
D571491

galvanized steel rack, 6-module, cross-section 30 x 30 mm, length 2 m, welding attachment Max. load capacity 4000 kg.

XL-CP99A36/KT/2000/8K/5
R920110

Kit for 8k2 resistive safety edges, length 2 metres, with 99 mm-high EPDM rubber strip, aluminium section, 2 contact terminals, 2 caps, 1 x 8.2 kOhm resistance connector and connection cable.

Kit for 8k2 resistive safety edges, length 2 metres, with 99 mm-high EPDM rubber strip, aluminium section, 2 contact terminals, 2 caps, 1 x...

KIT WIRELSSBAND 2.R
R920111

Wireless transmission system for resistive safety edges comprising transmitter and receiver.

TX WIRELESSBAND 2.R
P125050

Wireless transmitter for resistive safety edges.

BIN120 CATENA 2900
P115010 00001

Chain track for EOS 120, length 2900 mm, working stroke 2400 mm

BIN 1250-2900 CATENA
P115035 00001

Chain rail for Botticelli Smart BT A 1250 compatible with EOS 120, length 2900 mm, effective travel 2400 mm

BIN120 CATENA 3500
P115010 00002

Chain track for EOS 120, length 3500 mm, working stroke 3000 mm

BIN 1250-3500 CATENA
P115035 00002

Chain rail for Botticelli Smart BT A 1250 compatible with EOS 120, length 3500 mm, effective travel 3000 mm

BIN CHAIN 2X1450
P115009 00005

Chain rail divided into two halves for Botticelli, length 2900, travel 2,400 millimetres Chain rail divided into two halves for Botticelli, length 2900 mm, travel 2400 mm

Chain rail divided into two halves for Botticelli, length 2900, travel 2,400 millimetres Chain rail divided into two halves for Botticelli,...

BIN B GDA 3020 CAT
P115015 00001

Chain rail for TIZIANO B GDA, length 3020 mm, useful travel 2560 mm

BIN B GDA 3620 CAT
P115015 00002

Chain rail for TIZIANO B GDA, length 3620 mm, useful travel 3160 mm

BIN B Gda 2x1510 Cat
P115015 00003

Chain track divided into two halves for TIZIANO B GDA, length 3020 mm, useful travel 2560 mm

BIN B Gda 2x1810 Cat
P115015 00004

Chain track divided into two halves for TIZIANO B GDA, length 3620 mm, useful travel 3160 mm

BIN 650-850 CATENA 2900
P115036 00001

Chain rail for Botticelli BT A 650-850 compatible with Botticelli 600-800, length 2900 mm, effective travel 2400 mm

BIN CATENA 3500 SINT
P115020 00002

Chain rail for BOTTICELLI, length 3500 mm, useful travel 3000 mm

BIN 650-850 CATENA 3500
P115036 00002

Chain rail for Botticelli BT A 650-850 compatible with Botticelli 600-800, length 3500 mm, effective travel 3000 mm

BIN CATENA 2X1750 SINT
P115021 00002

Chain rail divided into two halves for Botticelli, length 3500 mm, travel 3000 mm

BIN 650-850 CATENA 2X1750
P115036 00005

Chain rail divided into two halves for Botticelli BT A 650-850 compatible with Botticelli 600-800, length 3500 mm, travel 3000 mm

BIN 1250 2x1750 CATENA
P115035 00004

Chain rail divided into two halves for Botticelli Smart BT A 1250 compatible with EOS 120, length 3500 mm, travel 3000 mm

BIN 1250 2x1450 CATENA
P115035 00003

Chain rail divided into two halves for Botticelli Smart BT A 1250 compatible with EOS 120, length 2900 mm, travel 2400 mm

BIN 650-850 CATENA 2X1450
P115036 00004

Chain rail divided into two halves for Botticelli BT A 650-850 compatible with Botticelli 600-800, length 2900 mm, travel 2400 mm

BIN 650-850 CINGHIA 2X1450
P115037 00003

Belt rail divided into two halves for Botticelli BT A 650-850 compatible with Botticelli 600-800, length 2900 mm, travel 2400 mm

BIN B GDA 2x1810 BELT
P115026 00004

Two-piece monoblock belt rail, length 3620 mm, useful length 3160 mm

BIN CINGHIA 2900 PIG FE
P115022 00001

Belt rail for BOTTICELLI, length 2900 mm, useful travel 2400 mm

BIN 650-850 CINGHIA 2900
P115037 00001

Belt rail for Botticelli BT A 650-850 compatible with Botticelli 600-800, length 2900 mm, effective travel 2400 mm

BIN 650-850 CINGHIA 3500
P115037 00002

Belt rail for Botticelli BT A 650-850 compatible with Botticelli 600-800, length 3500 mm, effective travel 3000 mm

BIN 650-850 CINGHIA 2X1750
P115037 00004

Belt rail divided into two halves for Botticelli BT A 650-850 compatible with Botticelli 600-800, length 3500 mm, travel 3000 mm

BIN B GDA 3620 BELT
P115026 00002

Monoblock belt rail, length 3620 mm, useful length 3160 mm

BIN B GDA 3020 BELT
P115026 00001

Monoblock belt rail, length 3020 mm, useful length 2560 mm

BIN B GDA 2x1510 BELT
P115026 00003

Two-piece monoblock belt rail, length 3020 mm, useful length 2560 mm

CABLE LX BT
N999417

1603 cable for LUX BT/GIUNO BT/IGEA - skein of 100 m

CABLE N
N999405

Control unit connecting cable for PHOBOS AC A. Coil of 100 m, 4x0,75

CABLE N BT
N999404

Control unit connecting cable for PHOBOS BT A, KUSTOS BT A. Coil of 100 m, 3x1,5.

ECOSOL CABLE
N999476

20 m extension for ECOSOL CHARGER

PEGASO CABLE MONO
D121631

Pre-wired power supply cable for PEGASO single phase operators. Length 1 m

PEGASO CABLE TRI
D121632

Pre-wired power supply cable for PEGASO three-phase operators. Length 1 m

PEGASO CABLE AUTO 5
D121633

Pre-wired connection cable between PEG INT and external control unit electric power supply. Length 5 m

PEGASO INT CABLE 10
D121649

Pre-wired connection cable between PEG INT and external control unit for the management of motor safety systems and limit switches. Length 10 m

Pre-wired connection cable between PEG INT and external control unit for the management of motor safety systems and limit switches. Length...

PEGASO UP CONTROL 5
D121624

Cable with pre-wired OPEN - STOP - CLOSE keypad for PEGASO UP operators. For adjusting motor limit switches from floor level. Length 5 m

PEGASO UP CONTROL 10
D121625

Cable with pre-wired OPEN - STOP - CLOSE keypad for PEGASO UP operators. For adjusting motor limit switches from floor level. Length 10 m

UNICAVO
D121502

Serial cable for connection of PROXIMA to PC or of COMPASS 232/COMPASS SC 232 to PC

PEGASO CABLE ENC 5
D121674

Pre-wired connection cable between operator and external control unit for the management of encoder. Lenght 5 m

PEGASO CABLE ENC 10
D121675

Pre-wired connection cable between operator and external control unit for the management of encoder. Lenght 10 m

PEGASO CABLE AUTO 5N
D121679

Pre-wired connection cable between PEG INT and external control unit electric power supply. Length 5 m

PEGASO CABLE AUTO 10N
D121680

Pre-wired connection cable between PEG INT and external control unit electric power supply. Length 10 m

BOLLARD CABLE EXT25
P800114

Extra charge for 25 m cable for bollards (to be added to the 10 included into bollards)

BOLLARD CABLE EXT50
P800115

Extra charge for 50 m cable for bollards (to be added to the 10 included into bollards)

PLE
D730178

Anchor plate for welding the mountings to masonry pillars for LUX, ORO, PHOBOS operators

HIDE SL ADA
P125045

Plates for installing the HIDE SL operator inside the aluminium post.

PL LX BT
N999443

Anchor plate for welding the mountings to masonry pillars for LUX BT, GIUNO BT A

ARB LUX G
N733474

Adjustable front and rear bracket for LUX G operator

ARB LUX
N733426

Adjustable front and rear bracket for LUX operator

ARB PHOBOS N L
N733428

Front and rear adjustable bracket for PHOBOS operator

ARB PHOBOS N
N733427

Front and rear adjustable bracket for PHOBOS operator

ARB ORO
N733424

Adjustable front and rear brackets for ORO operator

APT
N999060

Assembly for fitting BOTTICELLI, EOS 120 at over 30 cm from the ceiling

APT S
N999060 00001

Assembly for fitting BOTTICELLI BT A to the ceiling

ECOSOL POST BR
N999473

Set of stainless steel screws and brackets for installing the ECOSOL PANEL on a post of diameter 48-100mm

ECOSOL SECURITY
N999475

Anti-tamper stainless steel screws and fasteners for ECOSOL PANEL and ECOSOL POST BR

TPF
P800040

Foundation and anchor plate for totem

SBV
P111445

Anodised aluminium supporting crosspiece for VISTA SL

PPR
P111156

Door guide slide for automatic doors with aluminium frame

PGI
P111158

Bottom door guide for automatic doors with aluminium frame

PEGASO ADA
N733449

PEGASO ADA adapter for installation on doors with 1"1/4 shaft

PEG CCP
N999468

Extension for PEGASO C operators release chain. Length 4 m

SFZ
N733121

Additional fixing bracket kit. To be used on chain drive installations.

SFD
N999151

Base plate for DEIMOS series (supplied with operator)

SFI
N999156

Base plate for ARES and ICARO (supplied with operator)

SFSP
P125015

Adjustable anchor base for SP3500, supplied separately

BASP
P125001

Base plate for SP4000 (supplied with operator)

SP3500 SAFETY
P125016

Safety microswitch for SP3500

SLV SBV C1
N733527

Brackets for ceiling mounting of the SBV C aluminium supporting crosspiece

SLV SBV C2
N733526

Brackets for side mounting of the SBV C aluminium supporting crosspiece

SAS2 KIT B GDA 260 B01
N999621

Brackets for ceiling mounting TIZIANO B GDA up to max 50 cm

SAS1 KIT B GDA 260 B01
N999620

Brackets for ceiling mounting TIZIANO B GDA up to max 30 cm

PPE
D730567

Anchoring plate

SBV TL
P111640 00001

Vista TL support beam, length 6.82 m

SLV SBV TL1
N733564

SBV TL ceiling fixing brackets

SLV SBV TL2
N733565

SBV TL side fixing brackets

ARB KUSTOS FRONT
N733646

Front adjustable fixing brackets for Kustos BT A

ARB KUSTOS REAR
N733647

Pair of adjustable rear fixing brackets for Kustos BT A

PLE ATHOS
N999724

Anchor plate for welding the mountings to masonry pillars for ATHOS operators

LRV
P135005

Short articulated arms for IGEA and IGEA BT

SFR B
N735002

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7)

SFR-L B
N735003

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7)

SFR B - COMPLETE
N735002 00001

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

ARB PHOBOS 25
N733427 00001

Adjustable front mounting bracket, Phobos A 25

ARB PHOBOS 40
N733428 00001

Adjustable front mounting bracket, Phobos A 40

SFR-L B - COMPLETE
N735003 00001

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

ARB GIUNO
N733474 00001

Adjustable front mounting bracket

ARB ORO - LUX
N733424 00001

Adjustable front mounting bracket for ORO and LUX

NAT
N999131

Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath

FCS SX
N733066 00004

Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf

CPS SX
N733066 00002

Foundation box designed for fitting the SUB left-hand operator

CPS G
N733092

Weight-bearing foundation box for preparation for assembly of SUB G right and left operator

FCS DX
N733066 00003

Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf

CPS DX
N733066 00001

Foundation box designed for fitting the SUB right-hand operator

BTCF 120 E INOX
N733398

Stainless steel foundation box with levers for ELI AC A, ELI BT A. Release not provided

BTCF-120E PLUS
N733993

Reinforced foundation box for heavy or intensive use gates. Includes levers for ELI AC A, ELI BT A. Manual release not included.

BTCF-120E PLUS STAINLESS STEEL
N733994

Reinforced stainless steel foundation box for heavy or intensive use gates. Includes levers for ELI AC A, ELI BT A. Manual release not included.

Reinforced stainless steel foundation box for heavy or intensive use gates. Includes levers for ELI AC A, ELI BT A. Manual release not...

BTCF 120 E
N733397

Foundation box with levers for ELI AC A, ELI BT A. Release not supplied

FCS BT
N733480 00001

Foundation box for SUB BT series operators

CID SX
N733201 00002

Left hand tin plate + acc.(SUB)

CID DX
N733201 00001

Right hand tin plate + acc.(SUB)

FLANGE RANCH C
P800109

Flange for Ranch C

FLANGE RANCH D
P800110

Flange for Ranch E

FLANGE RANCH E
P800119

Flange for Ranch E

BSC
N728002

Arm for installation of SUB out of the gate axis

E180
N733304

Accessory for opening to 180 ° for ELI AC A40, ELI BT A40 operator

PBE
N733391

Complete kit for extending the useful travel of the BOTTICELLI and EOS 120 chain rails by 1 m.

CBA
N733112

Straight telescopic arms for the installation of PHEBE series operators on overhead door

CBAC
N733114

Curved telescopic arms for the installation of PHEBE series operators on overhead door

CBAS
N733119

Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1000 mm

CBASL
N733113

Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1500 mm

CAS2L
N733075

Straight arm accessories for installation of two Berma operators L = 1500 mm Spain version

CAS1L
N733074

Straight arm accessories for installation of one Berma operator L = 1500 mm Spain version

CAS2
N733048

Straight arm accessories for installation of two Berma operators L = 1000 mm Spain version

CAS1
N733042

Straight arm accessories for installation of one Berma operator L = 1000 mm Spain version

CAPC1500
N733308

Control unit for Phobos BT Net and Virgo Net

ASW 350 XL RIG
P111565

Vista SW XL rigid pull arm. Jamb max dimens.: 100 mm

ASW 260 XL RIG
P111790

Rigid pull arm Vista SW 260 XL.

ASW 350 XL ART
P111566

Vista SW XL articulated push arm. Max jamb dimens.: 150 mm

ASW 260 XL ART
P111791

Articulated push arm Vista SW 260 XL.

ASW 260 XL ARTL ARTIC. ARM PUSH LONG SW 260
P111794

Articulated push arm Vista SW 260 XL.

ASW 350 XL ARTL
P111567

Vista SW XL long articulated push arm. Jamb dimens. 150 mm

EXT ASW 350 XL 30
P111563 00001

Vista SW 260 XL arm connection, spacer

EXT ASW350 260 XL L=90
P111792

Arm connection L=90 mm Vista SW XL, spacer

EXT ASW350 260 XL L=110
P111796

Arm connection L=110 mm Vista SW XL, spacer

EXT ASW350 260 XL L=130
P111797

Arm connection L=130 mm Vista SW XL, spacer

EXT ASW 350 XL 50
P111563 00002

Arm connection L=50 mm Vista SW XL, spacer

EXT ASW 350 XL 70
P111563 00003

Arm connection L=70 mm Vista SW XL, spacer

EXT ASW 350 XL 90
P111563 00004

Arm connection L=90 mm Vista SW XL, spacer

BRTS
P115029

Triangular slide arm for overhead doors For BOTTICELLI SMART BT A 850-1250, BOTTICELLI B CRC 480, EOS 120, BOTTICELLI 800 U and EOS 120 U operators.

Triangular slide arm for overhead doors For BOTTICELLI SMART BT A 850-1250, BOTTICELLI B CRC 480, EOS 120, BOTTICELLI 800 U and EOS 120 U...

SAB BOTTICELLI BT A 1250
P115038

Adaptor bracket for Botticelli Smart 1250 applications on EOS 120/1200 U tracks.

CBAC-G
N733221

Curved telescopic arms for installation of PHEBE BT A series operators on up-and-over doors

LBA
N734921

Lever for articulated arm, E5 BT A12, E5 BT A18

LS12
N735057

Short pedestrian slide lever for E5 BT A12

LS18
N735058

Long slide lever for E5 BT A18

TA BIN
N999370

Vibration damper plugs for EOS120 and BOTTICELLI, (pack of 4 plugs)

BCP
D412377

Short welding base for PHEBE series operators (L 578 mm)

BLP
N733288

Long welding base for PHEBE series operators (L 1600 mm)

CTBP
N733299

Pack of 1800 mm drive tubes and fixing bases for completing the PHEBE N KIT

CTA
N733120

2 square drive tubes of cross section 20x20 mm and length 1800 mm for PHEBE N series operators

CTA2
N733129

2 square drive tubes of cross section 20x20 mm and length 200 mm for PHEBE N series operators

TL 60 KIT
P130018

Basic accessories kit for installation of an actuator, necessary for all motors (10 to 50 Nm) without handle release.

TL 60 M KIT
P130020

Basic accessories kit for installation of an actuator with handle release. Necessary for proper installation.

SM504
P130015

Support with bearing for octagonal roller - screw type

SM505
P130014

Support for octagonal roller - cementing type

SM5014
N999325

Wall support for operators with square snap pin and split pin for direct coupling, suitable for all operators (from 10Nm to 50Nm).

MANUAL PUMP 2LT
P800111

2 litre manual pump

BLOCCANTI 40
P130001

Anti-break-in block for shutters with slats of height 40 mm.

BLOCCANTI 50
P130013

Anti-break-in block for shutters with slats of height 50 mm.

SPAC
P111678

Pair of locks (2) for glass leaf

RUL 60/3
P130012

Octagonal shutter winding roller Ø60 mm x 3 m.

RUL 60/6
P130008

Octagonal shutter winding roller Ø60 mm x 6 m.

CAL 60/100
P130002

Adjustable telescopic octagonal cover for RUL 60.

CAL 60/30
P130004

Octagonal cover for RUL 60.

CBO
D730251

Anchor base for MOOVI and GIOTTO series barriers

SB
D573003

Aluminium skirt for road barrier booms. Price per linear metre (Calculate length of useful passage minus 40cm)

PCA 3
P120003 00001

Upper and lower shaped rubber cover for booms of max 3 m. For MOOVI and MICHELANGELO red

AT 502
N728028

Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 2.6 m.

AT 504
N728027

Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 4.6 m.

AT 704
N728026

First part of telescopic round boom for MICHELANGELO, diam. 70 mm, length 4.3 m.

AT 706
N728030

Round boom diam. 70 mm length 6.35 m for MICHELANGELO. for openings up to 6 m

AQ6
N728022

Complete 6 m rectangular boom for MICHELANGELO

BM
D730964

Anchor base for MICHELANGELO series barriers

AI3
N728004

Complete 3 m rectangular boom for BGV

AI4,5
N728008

Complete 4.5 m rectangular boom for BGV

BB
D730148

Anchor base for BGV series barriers

GAM
D940007

Mobile rest leg for BGV barrier boom (not usable on BGV 30)

OMEGA AQ S/STEEL
N999509

Pack of accessories for installation of 3/5 m rectangular boom for MOOVI INOX

OMEGA AQ
N999507

Pack of accessories for installation of 3/5 m rectangular boom for MOOVI/GIOTTO

OMEGA AT
N999513

Pack of accessories for installation of 3/6 m round boom for MOOVI/GIOTTO

OMEGA ES
P120103

Barrier clamp, casing for hand protection and screws for BOOM ES on Giotto Ultra 36. Barrier not included.

AT3
N728031

Complete 3 metre round boom for MOOVI/GIOTTO

AT5
N728032

Complete 5 metre round boom for MOOVI/GIOTTO

AQ3
N728033

Complete 3 metre rectangular boom for GIOTTO and MOOVI

AQ5
N728034

Complete 5 metre rectangular boom for GIOTTO and MOOVI

AT6
N728038

Complete 6 metre round boom for MOOVI/GIOTTO

FAF 2
P120023

Rest fork for booms. For bolting to ground.

FAF 2R RAL
P120025 00100

Fixed rest fork for booms with customised RAL colour. For bolting to ground.

FAF 2R
P120025

Universal adjustable fork for booms to be secured to the ground. Recommissioned with SB skirt accessory installation.

FAF 2 RAL
P120023 00100

Fixed rest fork for booms with customised RAL colour. For bolting to ground.

ATML EXT2
P120042

Extension L=2m for bar model ATML 60. Lights and rubber not included.

ATM25
P120102 00001

Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM25
P120111 00001

Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM50
P120102 00004

Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM50
P120111 00004

Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM40
P120102 00003

Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging

Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM40
P120111 00003

Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging

Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM30
P120102 00002

Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM30
P120111 00002

Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

BOOM PS30
P120087 00001

Aluminium bar, opening L = 3 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM ES30
P120104 00001

Aluminium bar for 3 m wide openings. Rubber strips and lights not included.

BOOM ES40
P120104 00002

Aluminium bar for 4 m wide openings. Rubber strips and lights not included.

BOOM ES50
P120104 00003

Aluminium bar for 5 m wide openings. Rubber strips and lights not included.

BOOM ES60
P120104 00004

Aluminium bar for 6 m wide openings. Rubber strips and lights not included.

BOOM PS40
P120087 00002

Aluminium bar, opening L = 4 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM PS50
P120087 00003

Aluminium bar, opening L = 5 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM PS60 NCG
P120087 00005

Aluminium bar, opening L = 6 m with red reflectors. Rubber, upper optic profile and excluded lights.

BOOM PS60
P120087 00004

Aluminium bar, opening L = 6 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

GA AQ AT
D940008

Movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers) -

GAMA AQ AT
D940009

Dampened movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers) -

THERMO
P120018

Thermostatically controlled heating element for use of GIOTTO BT A, MOOVI, MICHELANGELO BT A barriers to ambient temperatures of -40°C

PPA TL 1600 N
P111663 00001

Clamps for glass leaf, 1600 mm, natural

PPA TL 1600 O
P111663 00002

Clamps for glass leaf, 1600 mm, anodised

PPA TL 3200 N
P111664 00001

Clamps for glass leaf, 3200 mm, natural

PPA TL 3200 O
P111664 00002

Clamps for glass leaf, 3200 mm, anodised

PPA SL-SLC 8-10-12-13.5
P111679

Pair of clamps for glass leaves 8, 10, 12, 13.5 mm

PPA TL FX
P111688

Vista TL glass leaf fixing clamp

PPA TL GD
P111689

Floor guides for Vista TL glass leaves

BIR C
N190104

Rubber safety edge (H 30 mm), price per m

CM1000
P111050

Mechanical safety edge, length 1 m

CM1500
P111051

Mechanical safety edge, length 1.5 m

CM1700
P111052

Mechanical safety edge, length 1.7 m

CM2000
P111053

Mechanical safety edge, length 2 m

CM3000
P111054

Mechanical safety edge, length 3 m

CM4000
P111055

Mechanical safety edge, length 4 m

CM5000
P111056

Mechanical safety edge, length 5 m

BAR C 2
P111450 00002

Double profile rubber safety edge (L 2000 x H 60 mm)

BAR C 4
P111450 00004

Double profile rubber safety edge (L 4000 x H 60 mm)

BAR C 6
P111450 00006

Double profile rubber safety edge (L 6000 x H 60 mm)

CSP 10
N190039

Rubber shock absorber profile length 1000 mm

CSP 20
N190040

Rubber shock absorber profile length 2000 mm

CSP 25
N190041

Rubber shock absorber profile length 2500 mm

BAR C BA 4
P111451 00004

Double profile rubber safety edge with lip seals (L 4000 x H 60 mm)

TB
D221074

Plug for BIR C

BAR C BA 2
P111451 00002

Double profile rubber safety edge with lip seals (L 2000 x H 60 mm)

BAR C BA 6
P111451 00006

Double profile rubber safety edge with lip seals (L 6000 x H 60 mm)

TA
N999025

TA TAPPI BAR

PPA 10 108
P111159 00002

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 108

PPA 10 109
P111159 00003

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 109

PPA 10 110
P111159 00004

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 110

PPA 10 111
P111159 00005

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 111

PPA 10 112
P111159 00006

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 112

PPA 10 113
P111159 00007

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 113

PPA 10 114
P111159 00008

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 114

PPA 10 115
P111159 00009

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 115

PPA 10 116
P111159 00010

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 116

PPA 10 121
P111159 00013

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 121

PPA 10 208
P111159 00016

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 208

PPA 10 211
P111159 00019

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 211

PPA 10 212
P111159 00020

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 212

PPA 10 213
P111159 00021

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 213

PPA 10 214
P111159 00022

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 214

PPA 10 215
P111159 00023

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 215

PPA 10 216
P111159 00024

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 216

PPA 10 217
P111159 00025

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 217

PPA 10 219
P111159 00026

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 219

PPA 10 221
P111159 00027

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 221

PPA 10 223
P111159 00028

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 223

PPA 10 225
P111159 00029

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 225

PPA 10 227
P111159 00030

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 227

PPA 10 229
P111159 00031

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 229

PPA 12 110
P111159 00066

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 110

PPA 12 111
P111159 00067

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 111

PPA 12 112
P111159 00068

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 112

PPA 12 113
P111159 00069

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 113

PPA 12 115
P111159 00071

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 115

PPA 12 119
P111159 00074

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 119

PPA 12 123
P111159 00076

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 123

PPA 12 211
P111159 00081

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 211

PPA 12 213
P111159 00083

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 213

PPA 12 215
P111159 00085

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 215

PPA 12 217
P111159 00087

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 217

PPA 12 219
P111159 00088

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 219

PPA 12 221
P111159 00089

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 221

PPA 12 223
P111159 00090

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 223

PPA 12 225
P111159 00091

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 225

PPA 12 229
P111159 00093

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 229

KIT PPA 10
P111522 00001

Profile clamp kit for glass leaves 10mm. Allows the fitting of approx. 6 clamps for leaves of width 1000mm

KIT PPA 12
P111522 00002

Profile clamp kit for glass leaves 12mm. Allows the fitting of approx. 6 clamps for leaves of width 1000mm

ELA SLC 24.B KIT
N733535

Kit for assembly of 5 elastic mechanical safety opening systems (according to CO48) for Vista SLC. For laboratory use.

PRV 20.01O
P111630 00002

Upright L= 5.10m, 4pcs, 7.4Kg. Anodised.

PRV 20.02O
P111631 00002

Low upright L= 5.10m, 8pcs, 12Kg. Anodised.

PRV 20.03O
P111632 00002

Strip L= 5.10m, 5pcs, 20.4Kg. Anodised.

PRV 20.04O
P111633 00002

Crosspiece L= 5.10m, 4pcs, 19.3Kg. Anodised.

PRV 20.06O
P111635 00002

Fixed adapter L= 5.10m, 6pcs, 9.7Kg

PRV 20.07O
P111636 00002

“L” fixed L= 5.10m, 12pcs, 15.2Kg. Anodised.

PRV 20.08O
P111637 00002

Photocell holder L= 5.10m, 6pcs, 18Kg. Anodised.

PRV 20.09O
P111638 00002

Labyrinth L= 5.10m, 8pcs, 14.9Kg. Anodised.

PRV 20.10O
P111639 00002

Guide rail L= 5.10m, 6pcs, 8.9Kg. Anodised.

PRV 20.11O
P111690 00002

Strip L= 6.82m, 2pcs, 36.2Kg. Anodised.

PRV 20.A16
P111645

Fixed wing accessories kit, 20pcs

PRV 20.A17
P111646

Sliding wing accessories kit, 20pcs

PRV 20.A18
P111647

Floor guide, 1pc

PRV 20GD.19
P111648

Telescopic floor guide, 1pc

PRV 20GD.20
P111649

Glass separation strip accessories kit, 20pcs

PRV 20.A21
P111650

Plate for fixing strip in corridor, 1pc

PRV 20.A22
P111651

Plate for fixing strip to wall, 1pc

PRV 20.A23
P111710

Hex socket screw M5X16 8.8 500PCS, 500pcs

PRV 20.A24
P111711

Hex socket countersunk flathead cap screw M5X12 10.9 100PCS, 100pcs

PRV BR.13
P111642

Small brush 10mm, 20pcs

PRV BR.26
P111620

Narrow soft brush, 175 m

PRV BR.27
P111621

Wide soft brush, 450 m

PRV BR.47
P111618

Small brush 14mm. L= 2.5m, 20 pcs

PRV GK.02
P111623

Type 2 glass stop seal, 400 m

PRV GK.03
P111624

Type 3 glass stop seal, 150 m

PRV GK.06
P111625

Type 6 glass stop seal, 250 m

PRV GK.07
P111626

Type 7 glass stop seal, 250 m

PRV GK.09
P111712

Type 9 glass stop seal, 180m

PRV GK.12
P111641

Profile rabbet seal, 75m

PRV GK.14
P111643

Stopping seal, 100m

PRV GK.15
P111644

Type A glass stop sea, 90m

PRV GK.24
P111619

Semifixed wing rabbet seal, 250 m

PRV GK.28
P111622

Sliding wing rabbet seal, 50 m

PRV 40.01O
P111600 00002

Sliding wing upright L= 5.1 m, 2pcs, 8.6Kg. Anodised.

PRV 40.03O
P111602 00002

Automation adapter L= 5.1 m, 4pcs, 13.5Kg

PRV 40.04O
P111603 00002

Fake upright on wall L= 5.1 m, 4pcs, 7.8Kg. Anodised.

PRV 40.02O
P111601 00002

Sliding wing bottom crosspiece L= 5.1, 4pcs, 26Kg. Anodised.

PRV 40.05O
P111604 00002

Airtight labyrinth L= 5.1 m, 4pcs, 12.7Kg. Anodised.

PRV 40.06O
P111605 00002

Fanlight closing piece L= 5.1 m, 8pcs, 15.7Kg. Anodised.

PRV 40.07O
P111606 00002

Cap for uprights. L= 5.1 m, 20pcs, 13.1Kg. Anodised.

PRV 40.09O
P111608 00002

Standard trim. L= 6.82 m, 4pcs, 23.1Kg. Anodised.

PRV 40.11O
P111609 00002

Sliding wing guide. L= 5.1 m, 12pcs, 19.3Kg

PRV 40.13O
P111611 00002

Profile for fanlight. L= 6.82, 2pcs, 30.6Kg. Anodised.

PRV 40.17O
P111691 00002

"U" profile 30x45x30x2, 4pcs, 14.7Kg. Anodised.

PRV 40.14O
P111612 00002

Small vert glass stop L= 6.5 m, 8pcs, 14.2Kg. Anodised.

PRV 40.15O
P111613 00002

Med vert glass stop L= 6.5 m, 8pcs, 13.8Kg. Anodised.

PRV 40.16O
P111614 00002

Large vert glass stop L= 6.5 m, 8pcs, 14.8Kg. Anodised.

PRV 40.31O
P111615 00002

Small horiz glass stop L= 6.5 m, 8pcs, 14.2Kg. Anodised.

PRV 40.32O
P111616 00002

Med horiz glass stop L= 6.5 m, 8pcs, 13.8Kg. Anodised.

PRV 40.33O
P111617 00002

Large horiz glass stop L= 6.5 m, 8pcs, 14.8Kg. Anodised.

PRV 40GD.70
P111627

Low friction floor guide, 1pc

PRV 40GD.78
P111628

Low friction floor guide for telesc wing, 1pc

PRV 40.A39
P111696

Profile rectangular insert, 8pcs

PRV 40.A40
P111697

Carr/profile hex insert, 40pcs

PRV 40.A38
P111698

Frame spacer exten. 2.5mm, 200pcs

PRV 40.A49
P111699

Universal coupling, 100pcs

PRV 40.A50
P111700

Upright add. external bracket, 40pcs

PRV 40.A52
P111701

Trim add. external bracket, 40pcs

PRV 40.A55
P111702

Frame aligning spacer 12mm, 80pcs

PRV 40.A72
P111703

45° joint aligning bracket, 200pcs

PRV 40.A73
P111704

Glass ass. spacer kit 30pcs, 100pcs

PRV 40.A75
P111705

Prof carriage fixing screw M8x16hex, 200pcs

PRV 40.A76
P111706

Screw for fixing prof to crosspiece M6x8 panhead, 500pcs

PRV 40.A77
P111707

90° prof ass. screw Self-thr 4.8x32, 500pcs

PRV 40.A79
P111708

Guide/labyr. fixing screw 2.9x19, 200pcs

PRV 40.A80
P111709

Hex socket countersunk flathead cap screw M6X12 ZN+ES 100PCS, 100pcs

ERV
N733408

Electric lock for VISTA SL, SL C, TL (use in conjunction with BBV recommended)

X EF1
N999510

Electric brake for Wind Rmc and Rmb 230V

FCE
N733951

Magnetic limit switches for BT and AC models.

SRAL
P125044

Magnetic closure limit switch for HIDE SL, suitable for aluminium posts.

SHAC
P125048

Magnetic closure limit switch for HIDE SL, suitable for steel posts.

SASA 1AM SIST SFOND.1 ANTA MOBILE
P111720 00002

Breakthrough system kit for 1 movable leaf

SASA 1AMF SIST SFOND.ANTE 1 MOB + 1 FX
P111721 00002

Breakthrough system kit for 1 fixed leaf and 1 movable leaf

SASA 2AM SIST SFOND_.2 ANTE MOB
P111722 00002

Breakthrough system kit for 2 movable leaves

SASA 2AMF SIST SFOND.ANTE 2 MOB + 2 FX
P111723 00002

Breakthrough system kit for 2 fixed leaves and 2 movable leaves

SASA BRACKETS FOR LEAF BREAKAGE DETECTION PHOTOC.
P111724 00002

Bracket kit for mounting FPA1 photocells for leaf breakage detection

SASA PRA 2,5 PROF.PROT.ANTA FX/MOB 2.5M
P111725 00002

Protection profile for fixed/movable leaf. Length L = 2.5 m

SASA PRA 5 PROF. PROTEZ.ANTA FX/MOB, 5M
P111726 00002

Protection profile for fixed/movable leaf. Length L = 5 m

PRV 40.08O CORNICE ABBATTIMENTO L=6.82
P111607 00002

Break-open frame for fixed leaf joint. Length L = 6.82 m

PRV 40.12O MONTANTE ABBATTIMENTO L=5.1
P111610 00002

Break-open upright for fixed leaf joint. Length L = 5.1 m

PRV 40.A53 CERNIERE PER SASA DX
N733589

Right hinge for joint on fixed leaf

PRV 40.A54 CERNIERE PER SASA SX
N733590

Left hinge for joint on fixed leaf

PIG 12/ULISSE S
N733338

Z12 pinion gear for reduction on industrial sectional doors, for 1 " (25.4 mm) shafts

PIG 14/ULISSE S
N733336

Z14 pinion gear for reduction on industrial sectional doors, for 1 " (25.4 mm) shafts

PIG 18/ULISSE S
N733339

Z18 pinion gear for reduction on industrial sectional doors, for 1 " (25.4 mm) shafts

PIG 30/ULISSE S
N733337

Z30 pinion gear for reduction on industrial sectional doors, for 1 " (25.4 mm) shafts

COR 30
N733148

Z30 gear kit with accessories for industrial sectional doors, for 1 " (25.4 mm) shafts

COR 40
N733149

Z40 gear kit with accessories for industrial sectional doors, for 1 " (25.4 mm) shafts

HIDE HINGE INF
N999524

Bottom fixed hinge for the installation of HIDE SW series operator

HIDE HINGE SUP
N999526

Top hinge for the installation of HIDE SW series operator

TOTEM UNIT
P800116

Base module for TOTEM. Can be used as either the lower or upper module. Used to install the control accessories. Top cover not included. Painted stainless steel version, RAL 7015.

Base module for TOTEM. Can be used as either the lower or upper module. Used to install the control accessories. Top cover not included....

TOTEM UNIT - RAL
P800116 00102

Base module for TOTEM. Can be used as either the lower or upper module. Used to install the control accessories. Top cover not included. RAL colour as requested.

Base module for TOTEM. Can be used as either the lower or upper module. Used to install the control accessories. Top cover not included. RAL...

TCAP
P800108

Top covering without lights for elements of Totem.

TCAP - RAL
P800108 00102

Top covering without lights for elements of Totem. RAL colour as requested.

TCAP STAINLESS STEEL
P970303 10300

AISI 316 stainless steel cover for RANCH D fixed bollard.

TLIGHTS - RAL
P800117 00102

Traffic lights and upper cover for totem unit. RAL colour to order

VISTA SL-107 SX
P111411 00002

VISTA SL-108 SX
P111412 00002

VISTA SL-109 SX
P111414 00002

VISTA SL-110 SX
P111473 00002

VISTA SL-111 SX
P111416 00002

VISTA SL-112 SX
P111417 00002

VISTA SL-113 SX
P111418 00002

VISTA SL-114 SX
P111419 00002

VISTA SL-115 SX
P111420 00002

VISTA SL-116 SX
P111421 00002

VISTA SL-117 SX
P111422 00002

VISTA SL-119 SX
P111423 00002

VISTA SL-121 SX
P111424 00002

VISTA SL-123 SX
P111425 00002

VISTA SL-125 SX
P111426 00002

VISTA SL-208
P111413 00002

VISTA SL-227
P111427 00002

VISTA SL-229
P111428 00002

CARTER VISTA SL C-110/210 L=2200 O
P111415 00002

VISTA CASING TL2-207 L=1350 O
P111569 00002

VISTA CASING TL2-208 L=1500 O
P111570 00002

VISTA CASING TL2-209 L=1650 O
P111571 00002

VISTA CASING TL2-210 L=1800 O
P111572 00002

VISTA CASING TL2-212 L=2100 O
P111573 00002

VISTA CASING TL2-214 L=2400 O
P111574 00002

VISTA CASING TL2-216 L=2700 O
P111575 00002

VISTA CASING TL2-218 L=3000 O
P111576 00002

VISTA CASING TL2-220 L=3300 O
P111577 00002

VISTA CASING TL2-222 L=3600 O
P111578 00002

VISTA CASING TL2-224 L=3900 O
P111579 00002

VISTA CASING TL2-226 L=4200 O
P111580 00002

VISTA CASING TL2-228 L=4500 O
P111581 00002

VISTA CASING TL2-230 L=4800 O
P111582 00002

VISTA CASING TL2-232 L=5100 O
P111583 00002

VISTA CASING TL4-416 L=2600 O
P111584 00002

VISTA CASING TL4-418 L=2900 O
P111585 00002

VISTA CASING TL4-420 L=3200 O
P111586 00002

VISTA CASING TL4-422 L=3500 O
P111587 00002

VISTA CASING TL4-424 L=3800 O
P111588 00002

VISTA CASING TL4-426 L=4100 O
P111589 00002

VISTA CASING TL4-428 L=4400 O
P111590 00002

VISTA CASING TL4-430 L=4700 O
P111591 00002

VISTA CASING TL4-432 L=5000 O
P111592 00002

VISTA CASING TL4-434 L=5300 O
P111593 00002

VISTA CASING TL4-436 L=5600 O
P111594 00002

VISTA CASING TL4-438 L=5900 O
P111595 00002

VISTA CASING TL4-440 L=6200 O
P111596 00002

VISTA CASING TL4-442 L=6500 O
P111597 00002

VISTA CASING TL4-444 L=6800 O
P111598 00002

ESPAS 10 PROGRAMMER KIT
P800128

Software for rates programming for Money Box Plus station (serial interface, USB memory stick with sw, USB to RS232 converter includeds)

CIT-BUS POWER SUPPLY BOX & TRANSFERING CALLS
21188

Intercom call forwarding for transferring calls to up to 3 numbers in cascade. Only for digital intercom. Power supply included .

KIT STATIONS ANCHOR BASE
21261

Column anchor base for 20/30 entry/exit terminals

PALO ø60 H3600
394160

Galvanized steel pole support for panels and traffic lights. Diam. 60mm - h 3600mm

CIT-BUS EXTERNAL MODULE
135104

Outdoor digital intercom station

CASH DRAWER
135138

Cash drawer compatible with receipt printers that emulate ESC/POS command. RJ11 terminal to connect to the receipt printer and activate the cash drawer automatically. Compatibility with receipt printer only.

Cash drawer compatible with receipt printers that emulate ESC/POS command. RJ11 terminal to connect to the receipt printer and activate the...

CIT-BUS DIGITAL INTERCOM 20P
135656

Digital Intercom desktop handset for 20 external point.

CONTROL DESK IP
135810

IP intercom control Desk - 3,5" TFT display

SERVER PC
P800163

Tower Server with Windows Server 2019 OS.

CIT-BUS DIGITAL INTERCOM 10P
135993

Digital Intercom desktop handset for 10 external point.

TUVA UHF WINDSHIELD TAG
145029

TUVA Tag (car dashboard). Only for TUVA reader.

FANFOLD GAP TICKETS NEUTRAL
360558

Fanfold ticket box, 4000pcs tickets box with gap, neutral

LASER SAFATEY DETECTOR
394073

Safety laser detector. Its used in combination with magnetc loops in order to add an additional safety device (eg: for pedestrian). Includes two relay outputs. Maximum detection range: 5m x 5m.10-35VDC power supply.

Safety laser detector. Its used in combination with magnetc loops in order to add an additional safety device (eg: for pedestrian). Includes...

LASER DETECTOR REMOTE CONTROL
394075

Remote control for settings Safety laser detector and Presence and Safety laser detector.

PRESENCE AND SAFETY DETECTOR - LASER LOOPS
394080

Presence and Safety laser detector. Its used as an alternative of magnetc loops. Includes one input and two relay outputs. Maximum detection range: 9.9m x 9.9m.10-35VDC power supply.

Presence and Safety laser detector. Its used as an alternative of magnetc loops. Includes one input and two relay outputs. Maximum detection...

CUSTOMIZED FANFOLD GAP TICKET
999ASK999

Customized fanfold ticket box, 4000pcs tickets box with gap. Minimum 13 boxes.

RFID PROXIMITY CARD 125kHz
D110919

Proximity RFID card 125KHz for 20-30 system, 1 pcs. Minimum 10pcs.

MAGNETIC LOOP 6MT
D110945

High sensivity pre-cabled magnetic loop (10m tail x 6m loop)

COURTESY DISPLAY
D112048