SUB E DX

Product code P930009 00004

In-ground 230 V hydraulic operator Non reversing for hinged leaves up to 2.5 m. Manoeuvre time 24 s. Right operator.

Main features
  • The monoblock structure gives the possibility of a very neat installation that is extremely reliable over time.

  • The closing slowdown guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.

  • Control unit with programming display and new, simplified scenario-based programming

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
technical design
Control unit RIGEL 6
Board power supply 230 V
Motor voltage 230 V
Power consumption 250 W
Max. width of door/gate wing 2.5 m
Max. weight of door/gate wing 800 kg
Maximum angle 130 °
Cycle time 24 s
Type of limit switch work time
Slowdown no
Locking Open/close hydraulics
Release Non reversing
Impact reaction Hydraulic clutch
Frequency of use very intensive
Protection rating IP67
Environmental conditions -10 ÷ 60 °C
Interconnectivity no
ALPHA SD
Cod. D113680 00002

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide and swing gates, roll-up gates and overhead doors Card power supply: 230 V single-phase Operator power supply: 230V single phase 500W max Main features: removable terminal blocks, settings controlled by potentiometers, LED-based fault reporting and incorporated dual channel receiver Main functions: fast closing, pulse blocking, gate open indicator light Compatibility: MIZAR

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide...

CLS/82
Cod. D610256

Triangular release key for SUB operators l=82 mm

FCS DX
Cod. N733066 00003

Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf

FCS SX
Cod. N733066 00004

Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf

CPS DX
Cod. N733066 00001

Foundation box designed for fitting the SUB right-hand operator

CPS SX
Cod. N733066 00002

Foundation box designed for fitting the SUB left-hand operator

CPS G
Cod. N733092

Weight-bearing foundation box for preparation for assembly of SUB G right and left operator

BSC
Cod. N728002

Arm for installation of SUB out of the gate axis

ME
Cod. D111013

Control board for 12Vac solenoid lock for 230V automation systems

COMPACTA A20-180
Cod. P111782

Pair of photocells adjustable 180 ° horizontally. Range 20m. Power supply 12 – 33Vac / 15 – 35Vdc

RADIUS LED AC A R0
Cod. D114094 00002

Flashing light without incorporated antenna for motors with power supply 230 V.

RADIUS LED AC A R1
Cod. D114093 00002

Flashing light with incorporated antenna for motors with power supply 230 V.

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.