Accessories

Attention to detail is what makes a whole complete and fully functional.


View all the accessories   (765)

Sorry, no results were found for your search.

CINGHIA DENTATA GOMMA RPP8-15 ANTIS. 30M
D191099

Remen za automatska vrata VISTA SL L=30m.

POS SERVER PC
P111506

System server for wired installations (with software).

OAK 800.4 LIGHTS SCT SS316L EFO
P970094 00304

Hydraulic anti-terrorism bollard K4 230 V. Shaft height 800 mm, 273 mm diameter with LED light cap, for use with control unit with EFO device for rapid emergency rising. In the event of a power failure, the shaft lowers automatically. AISI 316L stainless steel shaft. Foundation box included. EFO version (Emergency Fast Operation). Anti-terrorism certification IWA14-1:2013 and PAS 68

Hydraulic anti-terrorism bollard K4 230 V. Shaft height 800 mm, 273 mm diameter with LED light cap, for use with control unit with EFO...

VISTA SLK MODULE KIT A100 SMART - 230V
P960669 00002

Kit automazione VISTA SLK A100.

VISTA SLK MODULE KIT A100R SMART - 230V
P960670 00002

Kit automazione VISTA SLK A100R.

KIT MODULO VISTA SL A200 SMART - 230V
P960621 00002

Kit automazione VISTA SL A200.

MOUNTING KIT VISTA SL1 MODULE LEAF EVO 120V
P960621 00001

Installation kit for VISTA SL for single-leaf automatic swing doors. Fitted with Vista module.

MOUNTING KIT VISTA SL1 MODULE LEAF EVO 120V
P960621 00001

Installation kit for VISTA SL for single-leaf automatic swing doors. Fitted with Vista module.

TOOTHED BELT PU RTD8-10mm ANTIS - 30m
D191195

Cinghia antistatica dentata di trasmissione da 10 mm in poliuretano.

KIT ESPANS. VISTA SL A200 - 2 ANTE
P111749

Expansion kit, second gate for Vista Module SL/SLE 1-gate kit.

KIT PROFILI VISTA SL A200 3m
P960614 00002

VISTA SL profiles kit 3m.

KIT PROFILI VISTA SL A200 4,4m
P960615 00002

VISTA SL profiles kit 4.4m.

KIT PROFILI VISTA SL A200 6m
P960616 00002

VISTA SL profiles kit 6m.

CINGHIA DENTATA GOMMA RPP8-15 ANTIS. 30M
D191099

Cinghia dentata in poliuretano da 15mm.

Staffa di bloccaggio carter per porte VISTA SL C
P111519

KIT CABLAGGI VISTA SL e SLC 107-125 212-229
P111447

KIT MONTAGGIO VISTA TL 2 ANTE
P960610 00002

Mounting kit for two-panel automatic doors VISTA TL.

KIT MONTAGGIO VISTA TL 4 ANTE
P960611 00002

Mounting kit for four-panel automatic doors VISTA TL.

KIT PROFILI VISTA TL 4,7M O
P960613 00002

VISTA TL profiles kit 4.7m.

KIT PROFILI VISTA TL 6,8M O
P960612 00002

VISTA TL profiles kit 6.8m.

KIT PPA 10
P111522 00001

KIT PPA 12
P111522 00002

VISTA EMERGENCY MODULE KIT 100-240V
P960700

VISTA EMERGENCY automation kit.

VISTA SLK PROFILES KIT 3M
P960672 00002

Kit profili VISTA SLK 3 m.

VISTA SLK PROFILES KIT 3M
P960672 00002

Kit profili VISTA SLK 3 m.

VISTA SLK PROFILES KIT 4.4M
P960671 00002

VISTA SLK profiles kit 4.4 m.

VISTA SLK PROFILES KIT 4.4M
P960671 00002

VISTA SLK profiles kit 4.4 m.

VISTA SLK PROFILES KIT 6M
P960673 00002

Kit profili VISTA SLK 6 m.

VISTA SLK PROFILES KIT 6M
P960673 00002

Kit profili VISTA SLK 6 m.

ANTI-STATIC BELT RPP5-12-KB2125 L.50 MT
D191196

Anti-static 12 mm polyurethane belt for VISTA EMERGENCY.

ANTI-STATIC BELT RPP5-12-KB2125 L.50 MT
D191196

Anti-static 12 mm polyurethane belt for VISTA EMERGENCY.

EXPANSION KIT VISTA SLK MODULE - DOUBLE LEAF
P111798

VISTA SLK double leaf expansion kit.

EXPANSION KIT VISTA SLK MODULE - DOUBLE LEAF
P111798

VISTA SLK double leaf expansion kit.

IXIO-DT3 SAFETY AND OPENING SENSOR
P111807

Safety sensor and emergency opening.

IXIO-DT3 SAFETY AND OPENING SENSOR
P111807

Safety sensor and emergency opening.

VISTA SLK MODULE KIT A150 SMART - 120V
P960668 00001

Kit automazione VISTA SLK A150.

VISTA SLK MODULE KIT A150 SMART - 230V
P960668 00002

Kit automazione VISTA SLK A150.

U-CONTROL
U-Control

U-CONTROL
U-Control

KIT ATM LIGHT 8 R/G 2W
P120077 00003

Red-green LED lights kit for fitting on ATML bars up to 8 m.

KIT ATM LIGHT 5 R/G 2W
P120077 00002

Red-green LED lights kit for fitting on ATM bars up to 5m.

KIT ATM LIGHT 3 R/G 2W
P120077 00001

Red-green LED lights kit for fitting on ATM bars up to 3m.

LIGHT PS/ES 30-IP67
P120089 20001

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 3 metres long. Power supply unit excluded.

LIGHT PS/ES 40-IP67
P120089 20002

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 4 metres long. Power supply unit excluded.

LIGHT PS/ES 50-IP67
P120089 20003

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 5 metres long. Power supply unit excluded.

LIGHT PS/ES 60-IP67
P120089 20004

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 6 metres long. Power supply unit excluded.

PCA N8
P120028 00005

Top and bottom rubber cover profile for booms of 8 m max.

BTM-SKIRT
P120085

Lower skirt for BOOM PS booms. Module length L = 2 m.

FULL-SKIRT
P120086

Full skirt (top and bottom) for BOOM PS booms. Module length L = 2 m. Does not include SKIRT BRACKET required for anchoring the first module to the barrier body.

Full skirt (top and bottom) for BOOM PS booms. Module length L = 2 m. Does not include SKIRT BRACKET required for anchoring the first module...

FULL-SKIRT PRO
P120105

Full symmetrical rack (top and bottom) for BOOM PS barriers. Module length L = 2 m. Does not include BRACKET SKIRT PRO required for anchoring the first module to the barrier body.

Full symmetrical rack (top and bottom) for BOOM PS barriers. Module length L = 2 m. Does not include BRACKET SKIRT PRO required for...

BRACKET SKIRT
P120095

Connection bracket between barrier body and simple (BTM SKIRT) or double (FULL SKIRT) aluminium rack.

BRACKET SKIRT PRO 68 DOUBLE PB
P120106

Connection bracket between barrier body and rack FULL SKIRT-PRO when using the KIT-PB Double Xtreme 68 fork lock.

ADJ-FOOT
P120093

Suspended cushioned telescopic supporting foot for BOOM PS booms.

PS JOINT
P120113

Joint for BOOM PS booms.

KIT ART90 PS MAXIMA ULTRA36
P120120

Hinge accessories kit for PS 90° articulated bar on Maxima Ultra 36. Excludes tie rod, bar, bar connector and PS lights. Compatible with PS BOOMS

Hinge accessories kit for PS 90° articulated bar on Maxima Ultra 36. Excludes tie rod, bar, bar connector and PS lights. Compatible with PS...

TIE ROD FOR ART90 PS KIT
P120121

Tie rod to be combined with the hinge accessories kit for PS 90° articulated bar. Compatible with ART 90 PS MAXIMA ULTRA KIT 36 and ART 90 GIOTTO ULTRA 36 KIT

Tie rod to be combined with the hinge accessories kit for PS 90° articulated bar. Compatible with ART 90 PS MAXIMA ULTRA KIT 36 and ART 90...

KIT ART90 PS GIOTTO ULTRA36
P120122

Kit accessori cerniera per barra snodata PS 90° su Giotto Ultra 36. Escluso tirante, barra, serraggio barra, luci light PS. Compatibile con aste BOOM PS

Kit accessori cerniera per barra snodata PS 90° su Giotto Ultra 36. Escluso tirante, barra, serraggio barra, luci light PS. Compatibile con...

ART90 BOOM PS30
P120092 00001

Boom bar PS 90° articulated L = 5 m pre-fitted. Excludes LIGHT PS lighting.

ART90 BOOM PS50
P120092 00003

Boom bar PS 90° articulated L = 5 m pre-fitted. Excludes LIGHT PS lighting.

ART90 BOOM PS30 GIOTTO ULTRA36
P120092 00006

Barra BOOM PS snodata 90° L=3 m già assemblata. Escluse luci LIGHT PS. Compatibile con Giotto Ultra 36.

ART90 BOOM PS50 GIOTTO ULTRA36
P120092 00007

Barra BOOM PS snodata 90° L=5 m già assemblata. Escluse luci LIGHT PS. Compatibile con Giotto Ultra 36.

BRACKET FRC
P120090

Anchoring bracket for RST-ATM skirts. Only compatible with OMEGA FRC ATML U lock

ATM30 180° RG
P120063

Articulated bar 180 ° 3 m with lights R/G

ACTR
N999608

Pack of 12 additional reflective labels (1 pack already included with each boom)

PCA N5
P120028 00003

Top and bottom rubber cover profile for booms of 5 m max.

PCA ES N3
P120117 00001

Lower and upper protective rubber strip kit for 3 m BOOM ES. Blanking plugs and fastening clips for lights included.

PCA ES N4
P120117 00002

Lower and upper protective rubber strip kit for 4 m BOOM ES. Blanking plugs and fastening clips for lights included.

PCA ES N5
P120117 00003

Lower and upper protective rubber strip kit for 5 m BOOM ES. Blanking plugs and fastening clips for lights included.

PCA N4
P120028 00002

Top and bottom rubber cover profile for booms of 4 m max.

ART 90 Q
N728051

90 ° articulated joint for Moovi and Giotto booms. Max 4m clear passage.

PCA N6
P120028 00004

Top and bottom rubber cover profile for booms of 6 m max.

ATM30 180° RG
P120063 00001

Articulated bar 180 ° 3 m with lights R/G

ATM30 180°
P120110 00001

Articulated barrier with 3 m rise, 180° opening. Does not includes lights and rubber.

ATM50 180° RG
P120064 00001

Articulated bar 180 ° 5 m with lights R/G

ATM50 180°
P120110 00002

5 m articulated bar fitted, 180 ° opening. Lights and rubber not included.

OMEGA AT 70
N999607

Accessories pack for AT 704/706

OMEGA PS MAXIMA U36
P120084 00000

Single lock for protective finger trapping casing and screws for MAXIMA ULTRA 36. BOOM PS bar excluded.

OMEGA FRA PS MAXIMA U36
P120094 00000

Resettable impact protection connector (manual) for Maxima Ultra 36 barrier. BOOM PS bar excluded.

OMEGA AQ 6
N999606

Accessories pack for AQ 6 boom

OMEGA ATM U35
P120062 00001

Single clamping for ATM bar for MAXIMA ULTRA 35. Bar not included.

OMEGA PS GIOTTO ULTRA 36
P120100

Barrier clamp, casing for hand protection and screws for BOOM PS on Giotto Ultra 36. Barrier not included.

ATM50 90° RG
P120066 00001

Articulated bar 90 ° 5 m with lights R/G

ATM50 90°
P120109 00002

Articulated barrier with 5 m rise, 90° opening. Does not includes lights and rubber.

ATM30 90° RG
P120065 00001

Articulated bar 90 ° 3 m with lights R/G

ATM30 90°
P120109 00001

Articulated barrier with 3 m rise, 90° opening. Does not includes lights and rubber.

ATM ARTICULATED JOINT + TIE ROD KIT
P120073

Kit for 90° articulated bar. Does not include bar, lights and rubber.

ZFAF2
P120026

Additional anchor plates for cementing FAF2 forks to ground.

PCA N3
P120028 00001

Top and bottom rubber cover profile for booms of 3 m max.

OMEGA ATM FRA U35
P120071

Single clamping for ATM bar for Maxima Ultra 35

OMEGA ATM FRA U35 IMPACT PROTECTION CONNECTOR
P120071 00001

Single clamping for ATM bar for Maxima Ultra 35

PCA ATM 8
P120053 00003

Protection rubber (black) for fitting on bars from L = 6÷8 m.

MLR2.5
P120056

Red spring - MAXIMA Utra 35 Ref. spring table

MLB3
P120057

Blue spring - MAXIMA Ultra 35 Ref. spring table

MLV5
P120058

Green spring - MAXIMA Ultra 35 Ref. spring table

OMEGA ATML
P120044 00001

Single clamping, hand guard and screws for ATML bar on MAXIMA 60/80. Bar not included.

MLC9.5
P120061

Purple spring - Maxima Ultra 68. See springs table

MLC9
P120060

Yellow spring - Maxima Ultra 68. Ref. spring table

MLC7.5
P120059

White spring - MAXIMA Ultra 68. Ref. spring table

ATML60
P120041 00001

Aluminium bar L = 6 m Ø92 mm. Lights and rubber not included. Completely protected by new polystyrene packaging.

OMEGA FRC ATML
P120045 00001

New fork clamping for ATML bar on barrier model. MAXIMA 60/80. Bar not included.

RST ATM
P120049

Aluminium rack. Price for 3 metres. Suspended foot not included. Compatible with ATML and ATM model bars.

GA ATM
P120050

Adjustable suspended foot, powder coated cataphoresis treated.

PCA ATM 5
P120053 00002

Rubber protection (red) for fitting on bar L = 5 m max.

PCA ATM 3
P120053 00001

Rubber protection (red) for fitting on bar L = 3 m max.

OMEGA ATM FRA
P120048 00001

Fracture system clamping for bar ATM

OMEGA AT
P120043 00001

Single lock, hand protection casing and screws for ATM barrier on Maxima 30. Barrier not included.

OMEGA FRC ATML U
P120047 00001

Fork clamping for ATML bar on barrier model. MAXIMA 68 ULTRA. Bar not included.

OMEGA ATML U
P120046 00001

Single clamping, hand guard and screws for ATML bar on MAXIMA 68 ULTRA. Bar not included.

IS ATML
P120078

Internal reinforcement for ATML rods

IS ATML/BL-LARGE PRO
P120118

Internal reinforcement for ATML booms, recommended for booms L > 6 metres.

HYPHEN PS
P120091

Internal reinforcement/joint for BOOM PS booms. Already included in the Maxima Ultra 36 XL barriers but recommended for barriers L >= 5 m with or without accessories.

Internal reinforcement/joint for BOOM PS booms. Already included in the Maxima Ultra 36 XL barriers but recommended for barriers L >= 5 m...

HYPHEN PS PRO
P120108

Internal reinforcement for BOOM PS booms L=175 cm. Increases the rigidity of the bar. Recommended for use in particularly windy areas.

EBB KIT ATML
P120079

Electric lock for ATML rods to be installed on an FAF UNI R adjustable fork.

FAF UNI R
P120080

Universal adjustable fork for all rods; recommended with installation of FULL SKIRT accessory.

MLC11
P120081

Black spring - Maxima Ultra 68. See springs table

CVZ-S
N999320

steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports attachment Max. load capacity 800 kg.

CVZ
D571053

steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw-fitted on supports attachment Max. load capacity 1000 kg.

CP
D221073

plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots attachment Max. load capacity 600 kg.

CFZ
D571054

galvanized steel rack, 4-module, cross-section 22 x 22 mm, length 2 m, welding attachment Max. load capacity 2000 kg.

CFZ6
D571491

galvanized steel rack, 6-module, cross-section 30 x 30 mm, length 2 m, welding attachment Max. load capacity 4000 kg.

EDGE XL-CP99A36/CA/2000/8K/5 BFT
R920110

Kit for 8k2 resistive safety edges, length 2 metres, with 99 mm-high EPDM rubber strip, aluminium section, 2 contact terminals, 2 caps, 1 x 8.2 kOhm resistance connector and connection cable.

Kit for 8k2 resistive safety edges, length 2 metres, with 99 mm-high EPDM rubber strip, aluminium section, 2 contact terminals, 2 caps, 1 x...

KIT WIRELSSBAND 2.R
R920111

Wireless transmission system for resistive safety edges comprising transmitter and receiver.

TX WIRELESSBAND 2.R
P125050

Wireless transmitter for resistive safety edges.

BIN 1250-2900 CATENA
P115035 00001

Chain rail for Botticelli Smart BT A 1250 compatible with EOS 120, length 2900 mm, effective travel 2400 mm

BIN 1250-3500 CATENA
P115035 00002

Chain rail for Botticelli Smart BT A 1250 compatible with EOS 120, length 3500 mm, effective travel 3000 mm

BIN B GDA 3020 CAT
P115015 00001

Chain rail for TIZIANO B GDA, length 3020 mm, useful travel 2560 mm

BIN B GDA 3620 CAT
P115015 00002

Chain rail for TIZIANO B GDA, length 3620 mm, useful travel 3160 mm

BIN B Gda 2x1510 Cat
P115015 00003

Chain track divided into two halves for TIZIANO B GDA, length 3020 mm, useful travel 2560 mm

BIN B Gda 2x1810 Cat
P115015 00004

Chain track divided into two halves for TIZIANO B GDA, length 3620 mm, useful travel 3160 mm

BIN 650-850 CATENA 2900
P115036 00001

Chain rail for Botticelli BT A 650-850 compatible with Botticelli 600-800, length 2900 mm, effective travel 2400 mm

BIN 650-850 CATENA 3500
P115036 00002

Chain rail for Botticelli BT A 650-850 compatible with Botticelli 600-800, length 3500 mm, effective travel 3000 mm

BIN 650-850 CATENA 2X1750
P115036 00005

Chain rail divided into two halves for Botticelli BT A 650-850 compatible with Botticelli 600-800, length 3500 mm, travel 3000 mm

BIN 1250 2x1750 CATENA
P115035 00004

Chain rail divided into two halves for Botticelli Smart BT A 1250 compatible with EOS 120, length 3500 mm, travel 3000 mm

BIN 1250 2x1450 CATENA
P115035 00003

Chain rail divided into two halves for Botticelli Smart BT A 1250 compatible with EOS 120, length 2900 mm, travel 2400 mm

BIN 650-850 CATENA 2X1450
P115036 00004

Chain rail divided into two halves for Botticelli BT A 650-850 compatible with Botticelli 600-800, length 2900 mm, travel 2400 mm

BIN 650-850 CINGHIA 2X1450
P115037 00003

Belt rail divided into two halves for Botticelli BT A 650-850 compatible with Botticelli 600-800, length 2900 mm, travel 2400 mm

BIN B GDA 2x1810 BELT
P115026 00004

Two-piece monoblock belt rail, length 3620 mm, useful length 3160 mm

BIN 650-850 CINGHIA 2900
P115037 00001

Belt rail for Botticelli BT A 650-850 compatible with Botticelli 600-800, length 2900 mm, effective travel 2400 mm

BIN 650-850 CINGHIA 3500
P115037 00002

Belt rail for Botticelli BT A 650-850 compatible with Botticelli 600-800, length 3500 mm, effective travel 3000 mm

BIN 650-850 CINGHIA 2X1750
P115037 00004

Belt rail divided into two halves for Botticelli BT A 650-850 compatible with Botticelli 600-800, length 3500 mm, travel 3000 mm

BIN B GDA 3620 BELT
P115026 00002

Monoblock belt rail, length 3620 mm, useful length 3160 mm

BIN B GDA 3020 BELT
P115026 00001

Monoblock belt rail, length 3020 mm, useful length 2560 mm

BIN B GDA 2x1510 BELT
P115026 00003

Two-piece monoblock belt rail, length 3020 mm, useful length 2560 mm

MASTER/SLAVE SW260 CABLE
P113036

Connection cable for Master/Slave configurations.

CABLE LX BT
N999417

1603 cable for LUX BT/GIUNO BT/IGEA - skein of 100 m

CABLE N
N999405

Control unit connecting cable for PHOBOS AC A. Coil of 100 m, 4x0,75

CABLE N BT
N999404

Control unit connecting cable for PHOBOS BT A, KUSTOS BT A. Coil of 100 m, 3x1,5.

ECOSOL CABLE
N999476

20 m extension for ECOSOL CHARGER

PEGASO CABLE MONO
D121631

Pre-wired power supply cable for PEGASO single phase operators. Length 1 m

PEGASO CABLE TRI
D121632

Pre-wired power supply cable for PEGASO three-phase operators. Length 1 m

PEGASO UP CONTROL 5
D121624

Cable with pre-wired OPEN - STOP - CLOSE keypad for PEGASO UP operators. For adjusting motor limit switches from floor level. Length 5 m

PEGASO UP CONTROL 10
D121625

Cable with pre-wired OPEN - STOP - CLOSE keypad for PEGASO UP operators. For adjusting motor limit switches from floor level. Length 10 m

UNICAVO
D121502

Serial cable for connection of PROXIMA to PC or of COMPASS 232/COMPASS SC 232 to PC

PEGASO CABLE ENC 5
D121674

Pre-wired connection cable between operator and external control unit for the management of encoder. Lenght 5 m

PEGASO CABLE ENC 10
D121675

Pre-wired connection cable between operator and external control unit for the management of encoder. Lenght 10 m

PEGASO CABLE AUTO 5N
D121679

Pre-wired connection cable between PEG INT and external control unit electric power supply. Length 5 m

PEGASO CABLE AUTO 10N
D121680

Pre-wired connection cable between PEG INT and external control unit electric power supply. Length 10 m

BOLLARD CABLE EXT25
P800114

Extra charge for 25 m cable for bollards (to be added to the 10 included into bollards)

BOLLARD CABLE EXT50
P800115

Extra charge for 50 m cable for bollards (to be added to the 10 included into bollards)

PLE
D730178

Anchor plate for attaching the rear mountings to masonry pillars for LUX, ORO, and PHOBOS operators.

HIDE SL ADA
P125045

Plates for installing the HIDE SL operator inside the aluminium post.

PL LX BT
N999443

Anchor plate for welding the mountings to masonry pillars for LUX BT, GIUNO BT A

ARB LUX G
N733474

Adjustable front and rear bracket for LUX G operator

ARB LUX
N733426

Adjustable front and rear bracket for LUX operator

ARB PHOBOS N L
N733428

Front and rear adjustable bracket for PHOBOS operator

ARB PHOBOS N
N733427

Front and rear adjustable bracket for PHOBOS operator

ARB ORO
N733424

Adjustable front and rear brackets for ORO operator

APT
N999060

Assembly for fitting BOTTICELLI, EOS 120 at over 30 cm from the ceiling

APT S
N999060 00001

Assembly for fitting BOTTICELLI BT A to the ceiling

ECOSOL POST BR
N999473

Set of stainless steel screws and brackets for installing the ECOSOL PANEL on a post of diameter 48-100mm

ECOSOL SECURITY
N999475

Anti-tamper stainless steel screws and fasteners for ECOSOL PANEL and ECOSOL POST BR

TPF
P800040

Foundation and anchor plate for totem

SBV
P111445

Опорная поперечина из анодированного алюминия для VISTA SL

SBV
P111445

Опорная поперечина из анодированного алюминия для VISTA SL

PPR
P111156

Door guide slide for automatic doors with aluminium frame

PGI
P111158

Bottom door guide for automatic doors with aluminium frame

PEGASO ADA
N733449

PEGASO ADA adapter for installation on doors with 1"1/4 shaft

PEG CCP
N999468

Extension for PEGASO C operators release chain. Length 4 m

SFZ
N733121

Additional fixing bracket kit. To be used on chain drive installations.

SFD
N999151

Base plate for DEIMOS series (supplied with operator)

SFI
N999156

Base plate for ARES and ICARO (supplied with operator)

SFSP
P125015

Adjustable anchor base for SP3500, supplied separately

BASP
P125001

Основа для анкерного крепления для SP4000 (поставляется вместе с приводом)

BASP
P125001

Основа для анкерного крепления для SP4000 (поставляется вместе с приводом)

SP3500 SAFETY
P125016

Safety microswitch for SP3500

SLV SBV C1
N733527

Brackets for ceiling mounting of the SBV C aluminium supporting crosspiece

SLV SBV C2
N733526

Brackets for side mounting of the SBV C aluminium supporting crosspiece

SAS2 KIT B GDA 260 B01
N999621

Brackets for ceiling mounting TIZIANO B GDA up to max 50 cm

SAS1 KIT B GDA 260 B01
N999620

Brackets for ceiling mounting TIZIANO B GDA up to max 30 cm

PPE
D730567

Anchoring plate

SBV TL
P111640 00001

Vista TL support beam, length 6,82 m

SLV SBV TL1
N733564

SBV TL ceiling fixing brackets

SLV SBV TL2
N733565

SBV TL side fixing brackets

ARB KUSTOS FRONT
N733646

Front adjustable fixing brackets for Kustos BT A

PLE ATHOS
N999724

Anchor plate for welding the mountings to masonry pillars for ATHOS operators

LRV
P135005

Short articulated arms for IGEA and IGEA BT

SFR B
N735002

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7)

SFR-L B
N735003

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7)

SFR B - COMPLETE
N735002 00001

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

ARB PHOBOS 25
N733427 00001

Adjustable front mounting bracket, Phobos A 25

ARB PHOBOS 40
N733428 00001

Adjustable front mounting bracket, Phobos A 40

SFR-L B - COMPLETE
N735003 00001

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

ARB GIUNO
N733474 00001

Adjustable front mounting bracket

ARB ORO - LUX
N733424 00001

Adjustable front mounting bracket for ORO and LUX

APSP
N335008

Adapter kit for PHOBOS BT A bracket.

FCS SX
N733066 00004

Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf

CPS SX
N733066 00002

Foundation box designed for fitting the SUB left-hand operator

CPS G
N733092

Weight-bearing foundation box for preparation for assembly of SUB G right and left operator

FCS DX
N733066 00003

Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf

CPS DX
N733066 00001

Foundation box designed for fitting the SUB right-hand operator

BTCF 120 E INOX
N733398

Stainless steel foundation box with levers for ELI AC A, ELI BT A. Release not provided

BTCF-120E PLUS
N733993

Reinforced foundation box for heavy or intensive use gates. Includes levers for ELI AC A, ELI BT A. Manual release not included.

BTCF-120E PLUS
N733993

Reinforced foundation box for heavy or intensive use gates. Includes levers for ELI AC A, ELI BT A. Manual release not included.

BTCF-120E PLUS STAINLESS STEEL
N733994

Reinforced stainless steel foundation box for heavy or intensive use gates. Includes levers for ELI AC A, ELI BT A. Manual release not included.

Reinforced stainless steel foundation box for heavy or intensive use gates. Includes levers for ELI AC A, ELI BT A. Manual release not...

BTCF 120 E
N733397

Foundation box with levers for ELI AC A, ELI BT A. Release not supplied

FCS BT
N733480 00001

Foundation box for SUB BT series operators

CID SX
N733201 00002

Left hand tin plate + acc.(SUB)

CID DX
N733201 00001

Right hand tin plate + acc.(SUB)

FLANGE RANCH C
P800109

Flange for Ranch C

FLANGE RANCH D
P800110

Flange for Ranch D

FLANGE RANCH E
P800119

Flange for Ranch E

BSC
N728002

Arm for installation of SUB out of the gate axis

E180
N733304

Accessory for opening to 180 ° for ELI AC A40, ELI BT A40 operator

PBE
N733391

Complete kit for extending the useful travel of the BOTTICELLI and EOS 120 chain rails by 1 m.

CBA
N733112

Straight telescopic arms for the installation of PHEBE series operators on overhead door

CBAC
N733114

Curved telescopic arms for the installation of PHEBE series operators on overhead door

CBAS
N733119

Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1000 mm

CBASL
N733113

Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1500 mm

CAS2L
N733075

Straight arm accessories for installation of two Berma operators L = 1500 mm Spain version

CAS1L
N733074

Straight arm accessories for installation of one Berma operator L = 1500 mm Spain version

CAS2
N733048

Straight arm accessories for installation of two Berma operators L = 1000 mm Spain version

CAS1
N733042

Straight arm accessories for installation of one Berma operator L = 1000 mm Spain version

CAPC1500
N733308

Control unit for Phobos BT Net and Virgo Net

ASW 350 XL RIG
P111565

Vista SW XL rigid pull arm. Jamb max dimens.: 100 mm

ASW 260 XL RIG
P111790

Rigid pull arm Vista SW 260 XL.

ASW 350 XL ART
P111566

Vista SW XL articulated push arm. Max jamb dimens.: 150 mm

ASW 260 XL ART
P111791

Articulated push arm Vista SW 260 XL.

ASW 260 XL ARTL ARTIC. ARM PUSH LONG SW 260
P111794

Articulated push arm Vista SW 260 XL.

ASW 350 XL ARTL
P111567

Vista SW XL long articulated push arm. Jamb dimens. 150 mm

EXT ASW 350 XL 30
P111563 00001

Vista SW 260 XL arm connection, spacer

EXT ASW350 260 XL L=90
P111792

Arm connection L=90 mm Vista SW XL, spacer

EXT ASW350 260 XL L=110
P111796

Arm connection L=110 mm Vista SW XL, spacer

EXT ASW350 260 XL L=130
P111797

Arm connection L=130 mm Vista SW XL, spacer

EXT ASW 350 XL 50
P111563 00002

Arm connection L=50 mm Vista SW XL, spacer

EXT ASW 350 XL 70
P111563 00003

Arm connection L=70 mm Vista SW XL, spacer

EXT ASW 350 XL 90
P111563 00004

Arm connection L=90 mm Vista SW XL, spacer

BRTS
P115029

Triangular slide arm for overhead doors For BOTTICELLI SMART BT A 850-1250, BOTTICELLI B CRC 480, EOS 120, BOTTICELLI 800 U and EOS 120 U operators.

Triangular slide arm for overhead doors For BOTTICELLI SMART BT A 850-1250, BOTTICELLI B CRC 480, EOS 120, BOTTICELLI 800 U and EOS 120 U...

SAB BOTTICELLI BT A 1250
P115038

Adaptor bracket for Botticelli Smart 1250 applications on EOS 120/1200 U tracks.

CBAC-G
N733221

Curved telescopic arms for installation of PHEBE BT A series operators on up-and-over doors

LBA
N734921

Lever for articulated arm, E5 BT A12, E5 BT A18

LS12
N735057

Short pedestrian slide lever for E5 BT A12

LS18
N735058

Long slide lever for E5 BT A18

AMIP
N998613

PHOBOS built-in mechanical stops.

TA BIN
N999370

Vibration damper plugs for EOS120 and BOTTICELLI, (pack of 4 plugs)

BCP
D412377

Short welding base for PHEBE series operators (L 578 mm)

BLP
N733288

Long welding base for PHEBE series operators (L 1600 mm)

CTBP
N733299

Pack of 1800 mm drive tubes and fixing bases for completing the PHEBE N KIT

CTA
N733120

2 square drive tubes of cross section 20x20 mm and length 1800 mm for PHEBE N series operators

CTA2
N733129

2 square drive tubes of cross section 20x20 mm and length 200 mm for PHEBE N series operators

TL 60 KIT
P130018

Basic accessories kit for installation of an actuator, necessary for all motors (10 to 50 Nm) without handle release.

TL 60 M KIT
P130020

Basic accessories kit for installation of an actuator with handle release. Necessary for proper installation.

SM505
P130014

Support for octagonal roller - cementing type

SM5014
N999325

Wall support for operators with square snap pin and split pin for direct coupling, suitable for all operators (from 10Nm to 50Nm).

TAP FOR MANUAL PUMP
P800112

Joint for two-litre manual pump.

MANUAL PUMP 2LT
P800111

2 litre manual pump

BLOCCANTI 40
P130001

Anti-break-in block for shutters with slats of height 40 mm.

BLOCCANTI 50
P130013

Anti-break-in block for shutters with slats of height 50 mm.

SPAC
P111678

Pair of locks (2) for glass leaf

PILLAR ALARM
P800102

Magnetic anti-theft kit for PILLAR B hydraulic bollards. To be requested when ordering

XPASS 800 ALARM
P800103

Anti-vandalism alarm for XPASS 275/800

RUL 60/3
P130012

Octagonal shutter winding roller Ø60 mm x 3 m.

CAL 60/100
P130002

Adjustable telescopic octagonal cover for RUL 60.

CBO
D730251

Anchor base for MOOVI and GIOTTO series barriers

FAF
D730088

Fixed rest fork for booms for cementing to ground.

SB
D573003

Aluminium skirt for road barrier booms. Price per linear metre (Calculate length of useful passage minus 40cm)

AT 502
N728028

Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 2.6 m.

AT 504
N728027

Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 4.6 m.

AT 704
N728026

First part of telescopic round boom for MICHELANGELO, diam. 70 mm, length 4.3 m.

AT 706
N728030

Round boom diam. 70 mm length 6.35 m for MICHELANGELO. for openings up to 6 m

AQ6
N728022

Complete 6 m rectangular boom for MICHELANGELO

BM
D730964

Anchor base for MICHELANGELO series barriers

GAM
D940007

Mobile rest leg for BGV barrier boom (not usable on BGV 30)

OMEGA AQ S/STEEL
N999509

Pack of accessories for installation of 3/5 m rectangular boom for MOOVI INOX

OMEGA AQ
N999507

Pack of accessories for installation of 3/5 m rectangular boom for MOOVI/GIOTTO

OMEGA AT
N999513

Pack of accessories for installation of 3/6 m round boom for MOOVI/GIOTTO

OMEGA ES
P120103

Barrier clamp, casing for hand protection and screws for BOOM ES on Giotto Ultra 36. Barrier not included.

AT3
N728031

Complete 3 metre round boom for MOOVI/GIOTTO

AT5
N728032

Complete 5 metre round boom for MOOVI/GIOTTO

AQ3
N728033

Complete 3 metre rectangular boom for GIOTTO and MOOVI

AQ5
N728034

Complete 5 metre rectangular boom for GIOTTO and MOOVI

GA
D940008

Mobile support leg for barriers

GAMA
D940009

Подвижная опорная ножка с амортизатором для шлагбаумов

GAMA
D940009

Подвижная опорная ножка с амортизатором для шлагбаумов

AT6
N728038

Complete 6 metre round boom for MOOVI/GIOTTO

FAF 2
P120023

Rest fork for booms. For bolting to ground.

FAF 2R RAL
P120025 00100

Fixed rest fork for booms with customised RAL colour. For bolting to ground.

FAF 2R
P120025

Universal adjustable fork for booms to be secured to the ground. Recommissioned with SB skirt accessory installation.

FAF 2 RAL
P120023 00100

Fixed rest fork for booms with customised RAL colour. For bolting to ground.

ATML EXT2
P120042

Extension L=2m for bar model ATML 60. Lights and rubber not included.

ATM25
P120102 00001

Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM50
P120102 00004

Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM40
P120102 00003

Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging

Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM30
P120102 00002

Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

BOOM PS30
P120087 00001

Aluminium bar, opening L = 3 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM ES30
P120104 00001

Aluminium bar for 3 m wide openings. Rubber strips and lights not included.

BOOM ES40
P120104 00002

Aluminium bar for 4 m wide openings. Rubber strips and lights not included.

BOOM ES50
P120104 00003

Aluminium bar for 5 m wide openings. Rubber strips and lights not included.

BOOM ES60
P120104 00004

Aluminium bar for 6 m wide openings. Rubber strips and lights not included.

BOOM PS40
P120087 00002

Aluminium bar, opening L = 4 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM PS50
P120087 00003

Aluminium bar, opening L = 5 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM PS60 NCG
P120087 00005

Aluminium bar, opening L = 6 m with red reflectors. Rubber, upper optic profile and excluded lights.

BOOM PS60
P120087 00004

Aluminium bar, opening L = 6 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

GA AQ AT
D940008

Movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers) -

GAMA AQ AT
D940009

Dampened movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers) -

THERMO
P120018

Thermostatically controlled heating element for use of GIOTTO BT A, MOOVI, MICHELANGELO BT A barriers to ambient temperatures of -40°C

PPA TL 1600 O
P111663 00002

Clamps for glass leaf, 1600 mm, anodised

PPA TL 3200 O
P111664 00002

Clamps for glass leaf, 3200 mm, anodised

PPA TL FX
P111688

Vista TL glass leaf fixing clamp

PPA TL GD
P111689

Floor guides for Vista TL glass leaves

BIR C
N190104

Rubber safety edge (H 30 mm), price per m

CM1000
P111050

Mechanical safety edge, length 1 m

CM1500
P111051

Mechanical safety edge, length 1.5 m

CM1700
P111052

Mechanical safety edge, length 1.7 m

CM2000
P111053

Mechanical safety edge, length 2 m

CM3000
P111054

Mechanical safety edge, length 3 m

CM4000
P111055

Mechanical safety edge, length 4 m

CM5000
P111056

Mechanical safety edge, length 5 m

BAR C 2
P111450 00002

Double profile rubber safety edge (L 2000 x H 60 mm)

BAR C 4
P111450 00004

Double profile rubber safety edge (L 4000 x H 60 mm)

BAR C 6
P111450 00006

Double profile rubber safety edge (L 6000 x H 60 mm)

CSP 10
N190039

Rubber shock absorber profile length 1000 mm

CSP 20
N190040

Rubber shock absorber profile length 2000 mm

CSP 25
N190041

Rubber shock absorber profile length 2500 mm

BAR C BA 4
P111451 00004

Double profile rubber safety edge with lip seals (L 4000 x H 60 mm)

TB
D221074

Plug for BIR C

BAR C BA 2
P111451 00002

Double profile rubber safety edge with lip seals (L 2000 x H 60 mm)

BAR C BA 6
P111451 00006

Double profile rubber safety edge with lip seals (L 6000 x H 60 mm)

TA
N999025

TA TAPPI BAR

PPA 10 107
P111159 00001

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 107

PPA 10 108
P111159 00002

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 108

PPA 10 109
P111159 00003

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 109

PPA 10 110
P111159 00004

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 110

PPA 10 111
P111159 00005

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 111

PPA 10 112
P111159 00006

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 112

PPA 10 113
P111159 00007

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 113

PPA 10 114
P111159 00008

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 114

PPA 10 115
P111159 00009

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 115

PPA 10 116
P111159 00010

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 116

PPA 10 117
P111159 00011

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 117

PPA 10 119
P111159 00012

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 119

PPA 10 121
P111159 00013

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 121

PPA 10 121
P111159 00013

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 121

PPA 10 123
P111159 00014

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 123

PPA 10 125
P111159 00015

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 125

PPA 10 208
P111159 00016

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 208

PPA 10 209
P111159 00017

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 209

PPA 10 210
P111159 00018

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 210

PPA 10 211
P111159 00019

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 211

PPA 10 212
P111159 00020

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 212

PPA 10 213
P111159 00021

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 213

PPA 10 214
P111159 00022

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 214

PPA 10 215
P111159 00023

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 215

PPA 10 216
P111159 00024

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 216

PPA 10 217
P111159 00025

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 217

PPA 10 219
P111159 00026

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 219

PPA 10 221
P111159 00027

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 221

PPA 10 223
P111159 00028

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 223

PPA 10 225
P111159 00029

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 225

PPA 10 227
P111159 00030

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 227

PPA 10 229
P111159 00031

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 229

PPA 12 108
P111159 00064

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 108

PPA 12 109
P111159 00065

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 109

PPA 12 110
P111159 00066

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 110

PPA 12 111
P111159 00067

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 111

PPA 12 112
P111159 00068

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 112

PPA 12 113
P111159 00069

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 113

PPA 12 114
P111159 00070

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 114

PPA 12 115
P111159 00071

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 115

PPA 12 117
P111159 00073

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 117

PPA 12 119
P111159 00074

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 119

PPA 12 123
P111159 00076

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 123

PPA 12 208
P111159 00078

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 208

PPA 12 209
P111159 00079

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 209

PPA 12 210
P111159 00080

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 210

PPA 12 211
P111159 00081

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 211

PPA 12 212
P111159 00082

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 212

PPA 12 213
P111159 00083

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 213

PPA 12 214
P111159 00084

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 214

PPA 12 215
P111159 00085

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 215

PPA 12 216
P111159 00086

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 216

PPA 12 217
P111159 00087

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 217

PPA 12 219
P111159 00088

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 219

PPA 12 221
P111159 00089

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 221

PPA 12 227
P111159 00092

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 227

PPA 12 229
P111159 00093

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 229

KIT PPA 10
P111522 00001

Profile clamp kit for glass leaves 10mm. Allows the fitting of approx. 6 clamps for leaves of width 1000mm

PPA10 GET CLAMP GLASS KIT SP10 (BY THE METRE)
P111162 00001

Profile clamp kit for glass leaves 10mm. Allows the fitting of approx. 6 clamps for leaves of width 1000mm

KIT PPA 12
P111522 00002

Profile clamp kit for glass leaves 12mm. Allows the fitting of approx. 6 clamps for leaves of width 1000mm

PPA12 GET CLAMP GLASS KIT SP12 (BY THE METRE)
P111162 00002

Profile clamp kit for glass leaves 12mm. Allows the fitting of approx. 6 clamps for leaves of width 1000mm

ERV
N733408

Electric lock for VISTA SL, SL C, TL (use in conjunction with BBV recommended)

X EF1
N999510

Electric brake for Wind Rmc and Rmb 230V

FCE
N733951

Magnetic limit switches for BT and AC models.

SRAL
P125044

Magnetic closure limit switch for HIDE SL, suitable for aluminium posts.

SHAC
P125048

Magnetic closure limit switch for HIDE SL, suitable for steel posts.

BLB
P111808

Bistable locking device for keeping the door in the locked/unlocked position without requiring a continuous current.

FRM
P111809

Magnetic brake device used to lock the door in any position. In case of malfunction, the door can be operated manually.

MOOVI PRM KIT
P120004

Hand protection kit against cutting, for MOOVI

CS 42
D211008

Pair of reduction half bearings for shafts of diameter 42 mm - Only for X130

CS 48
D211007

Pair of reduction half bearings for shafts of diameter 48 mm - Only for X130

SASA 1AM SIST SFOND.1 ANTA MOBILE
P111720 00002

Breakthrough system kit for 1 movable leaf

SASA 1AMF SIST SFOND.ANTE 1 MOB + 1 FX
P111721 00002

Breakthrough system kit for 1 fixed leaf and 1 movable leaf

SASA 2AM SIST SFOND_.2 ANTE MOB
P111722 00002

Breakthrough system kit for 2 movable leaves

SASA 2AMF SIST SFOND.ANTE 2 MOB + 2 FX
P111723 00002

Breakthrough system kit for 2 fixed leaves and 2 movable leaves

SASA BRACKETS FOR LEAF BREAKAGE DETECTION PHOTOC.
P111724 00002

Bracket kit for mounting FPA1 photocells for leaf breakage detection

SASA PRA 2,5 PROF.PROT.ANTA FX/MOB 2.5M
P111725 00002

Protection profile for fixed/movable leaf. Length L = 2,5 m

SASA PRA 5 PROF. PROTEZ.ANTA FX/MOB, 5M
P111726 00002

Protection profile for fixed/movable leaf. Length L = 5 m

PIG 12/ULISSE S
N733338

Z12 pinion gear for reduction on industrial sectional doors, for 1 " (25,4 mm) shafts

PIG 14/ULISSE S
N733336

Z14 pinion gear for reduction on industrial sectional doors, for 1 " (25,4 mm) shafts

PIG 18/ULISSE S
N733339

Z18 pinion gear for reduction on industrial sectional doors, for 1 " (25,4 mm) shafts

PIG 30/ULISSE S
N733337

Z30 pinion gear for reduction on industrial sectional doors, for 1 " (25,4 mm) shafts

COR 30
N733148

Z30 gear kit with accessories for industrial sectional doors, for 1 " (25,4 mm) shafts

COR 40
N733149

Z40 gear kit with accessories for industrial sectional doors, for 1 " (25,4 mm) shafts

IXIO/VIO RAIN COVER
P111769

Rain cover for IXIO/VIO sensors.

IXIO/VIO RAIN COVER
P111769

Rain cover for IXIO/VIO sensors.

VISTA SEL
D113722

Function selector for pedestrian door series VISTA SL, SL C, TL

REMOTE CONTROL
P111405

Remote control for adjusting and setting FALCON, EAGLE ONE and ACTIVE8

FALCON
P111407

Industrial presence sensor installable up to 7 m.

RIP
P111325

Multi-function active infrared radar, wide/narrow range

SPOTFINDER
P111406

IR curtain detector

VISTA SEL SW
D113789

Function selector Vista SW

VIO-M
P111662

Compact mono-directional activation sensor

VIO-DT2
P111653

Safety and bi-directional activation sensor, dual technology, monitored

VIO-DT1
P111654

Safety and mono-directional activation sensor, dual technology, monitored

IXIO-DT1
P111655

Safety and mono-directional activation sensor, dual technology, monitored, programmable c.telecom.

VIO-ST
P111656

Infrared safety sensor, monitored

4SAFE IR SAFETY SENSOR MONIT.SW/1MOD/700
P111657 00001

Monitored IR safety sensor for side-hung leaves, 1 module, 700 mm

4SAFE IR SAFETY SENSOR MONIT.SW/2MOD/700
P111657 00002

Monitored IR safety sensor for side-hung leaves, 2 modules, 700 mm

4SAFE IR SAFETY SENSOR MONIT.SW/2MOD/900
P111657 00003

Monitored IR safety sensor for side-hung leaves, 2 modules, 900 mm

OA-AXIS T
P111753

Active infrared sensor for activation and security with safety test

OA-AXIS II
P111751

Active infrared sensor for activation and security

OA-203C
P111754

Active infrared sensor for activation and presence

OA-PRESENCE TN
P111755

Active infrared sensor for security

OA-EDGE T 340 1M
P111756

Active infrared sensor for security L 340 mm with 1 module with safety test

OA-EDGE T 700 1M
P111757

Active infrared sensor for security L 700 mm with 1 module with safety test

OT 3
P111759

Elbow-operated pushbutton, silver

TP MAXIMA ULTRA
P120076

Thermal probe for Maxima Ultra barriers

LZR FLATSCAN SW LEFT BLACK
P111817

Sensore di sicurezza a tecnologia laser per ante battenti. Per installazione sinistra.

LZR FLATSCAN SW RIGHT BLACK
P111818

Sensore di sicurezza a tecnologia laser per ante battenti. Per installazione destra.

MAGIC SWITCH
P113035

Rilevatore di apertura senza contatto con opzione led acceso in rilevamento oppure a riposo. Grado IP54.

TOTEM UNIT
P800116

Stackable street cabinet that can be fitted with access control devices and traffic lights, to be combined with bollards and barriers. Inspectionable front panel. No top cap. Colour RAL 7015.

Stackable street cabinet that can be fitted with access control devices and traffic lights, to be combined with bollards and barriers....

TOTEM UNIT - RAL
P800116 00102

Stackable street cabinet that can be fitted with access control devices and traffic lights, to be combined with bollards and barriers. Inspectionable front panel. No top cap. RAL colour to order.

Stackable street cabinet that can be fitted with access control devices and traffic lights, to be combined with bollards and barriers....

TOTEM TRAFFIC LIGHT PANEL 2L 7015
P800169 00002

RAL 7015 traffic light panel for 2-light traffic light. Traffic light not included.

TOTEM TRAFFIC LIGHT PANEL 3L 7015
P800168 00002

RAL 7015 traffic light panel for 3-light traffic light. Traffic light not included.

RANCH D STAINLESS STEEL COATING
P970303 10300

AISI 316 stainless steel cover for RANCH D fixed bollard.

VISTA CASING TL2-207 L=1350 O
P111569 00002

VISTA CASING TL2-208 L=1500 O
P111570 00002

VISTA CASING TL2-209 L=1650 O
P111571 00002

VISTA CASING TL2-210 L=1800 O
P111572 00002

VISTA CASING TL2-212 L=2100 O
P111573 00002

VISTA CASING TL2-214 L=2400 O
P111574 00002

VISTA CASING TL2-216 L=2700 O
P111575 00002

VISTA CASING TL2-218 L=3000 O
P111576 00002

VISTA CASING TL2-220 L=3300 O
P111577 00002

VISTA CASING TL2-222 L=3600 O
P111578 00002

VISTA CASING TL2-224 L=3900 O
P111579 00002

VISTA CASING TL2-226 L=4200 O
P111580 00002

VISTA CASING TL2-228 L=4500 O
P111581 00002

VISTA CASING TL2-230 L=4800 O
P111582 00002

VISTA CASING TL2-232 L=5100 O
P111583 00002

VISTA CASING TL4-416 L=2600 O
P111584 00002

VISTA CASING TL4-418 L=2900 O
P111585 00002

VISTA CASING TL4-420 L=3200 O
P111586 00002

VISTA CASING TL4-422 L=3500 O
P111587 00002

VISTA CASING TL4-424 L=3800 O
P111588 00002

VISTA CASING TL4-426 L=4100 O
P111589 00002

VISTA CASING TL4-428 L=4400 O
P111590 00002

VISTA CASING TL4-430 L=4700 O
P111591 00002

VISTA CASING TL4-432 L=5000 O
P111592 00002

VISTA CASING TL4-434 L=5300 O
P111593 00002

VISTA CASING TL4-436 L=5600 O
P111594 00002

VISTA CASING TL4-438 L=5900 O
P111595 00002

VISTA CASING TL4-440 L=6200 O
P111596 00002

VISTA CASING TL4-442 L=6500 O
P111597 00002

VISTA CASING TL4-444 L=6800 O
P111598 00002

FANFOLD GAP TICKETS SACS
D191173

Scatola ticket tipo fanfold con gap, 4000pz (logo SACS) (v2)

ESPAS 10 PROGRAMMER KIT
P800128

Software for rates programming for Money Box Plus station (serial interface, USB memory stick with sw, USB to RS232 converter includeds)

CIT-BUS POWER SUPPLY BOX & TRANSFERING CALLS
21188

Intercom call forwarding for transferring calls to up to 3 numbers in cascade. Only for digital intercom. Power supply included .

KIT STATIONS ANCHOR BASE
21261

Column anchor base for 20/30 entry/exit terminals

PALO ø60 H3600
394160

Galvanized steel pole support for panels and traffic lights. Diam. 60mm - h 3600mm

CIT-BUS EXTERNAL MODULE
135104

Outdoor digital intercom station

CASH DRAWER
135138

Cash drawer compatible with receipt printers that emulate ESC/POS command. RJ11 terminal to connect to the receipt printer and activate the cash drawer automatically. Compatibility with receipt printer only.

Cash drawer compatible with receipt printers that emulate ESC/POS command. RJ11 terminal to connect to the receipt printer and activate the...

CIT-BUS DIGITAL INTERCOM 20P
135656

Digital Intercom desktop handset for 20 external point.

CONTROL DESK IP
P800173

IP intercom control Desk - 3,5" TFT display. Up to 12 SIP accounts.

CIT-BUS DIGITAL INTERCOM 10P
135993

Digital Intercom desktop handset for 10 external point.

TUVA UHF WINDSHIELD TAG
145029

TUVA Tag (car dashboard). Only for TUVA reader.

FANFOLD GAP TICKETS NEUTRAL
360558

Fanfold ticket box, 4000pcs tickets box with gap, neutral

LASER SAFETY SENSOR
394073

Safety laser detector. Its used in combination with magnetc loops in order to add an additional safety device (eg: for pedestrian). Includes two relay outputs. Maximum detection range: 5m x 5m.10-35VDC power supply.

Safety laser detector. Its used in combination with magnetc loops in order to add an additional safety device (eg: for pedestrian). Includes...

LASER DETECTOR REMOTE CONTROL
394075

Remote control for settings Safety laser detector and Presence and Safety laser detector.

PRESENCE AND SAFETY DETECTOR - LASER LOOPS
394080

Presence and Safety laser detector. Its used as an alternative of magnetc loops. Includes one input and two relay outputs. Maximum detection range: 9.9m x 9.9m.10-35VDC power supply.

Presence and Safety laser detector. Its used as an alternative of magnetc loops. Includes one input and two relay outputs. Maximum detection...

CUSTOMIZED FANFOLD GAP TICKET
999ASK999

Customized fanfold ticket box, 4000pcs tickets box with gap. Minimum 13 boxes.

RFID PROXIMITY CARD 125kHz
D110919

Proximity RFID card 125KHz for 20-30 system, 1 pcs. Minimum 10pcs.

MAGNETIC LOOP 5MT
D110945

High sensivity pre-cabled magnetic loop (10m tail x 5m loop)

COURTESY DISPLAY
D112048

Courtesy display for 30 system manned station, to interface via 232+USB through POS station.

MIFARE ISOCARD DESK READER 13,56MHz
D112086

13,56MHz MIFARE Isocard reader for 30 system manned station, USB.

EXTENDED TEMPERATURE 8P SWITCH
P800171

Ethernet Switch with extended temperature range (-40°C to +70°C ), 8 Ethernet Port.

KIT CAPIENZA
D113708

The Kit Capienza is a device used to manage the occupancy status of a stand alone car park or to regulate the transit of an alternating one-way track. It consists of: waterproof box, control board to manage inputs and outputs, backlit LCD display, 12 keys numeric keypad for programming.

The Kit Capienza is a device used to manage the occupancy status of a stand alone car park or to regulate the transit of an alternating...

LOOP DETECTOR PRO
D113948

2 channel loop detector, 24VDC/AC, up to 4 frequencies per channel for close loop installations, adjustable sensitivity, boost function for sensitivity increase. Direction detection.

2 channel loop detector, 24VDC/AC, up to 4 frequencies per channel for close loop installations, adjustable sensitivity, boost function for...

RFID ISOCARD DESK READER 125kHz
D113984

125kHz RFID Isocard reader for 30 system manned station, USB.

LOOP DETECTOR LITE
D113999

2 channel loop detector, 24VDC, up to 4 frequencies per channel for close loop installations, adjustable sensitivity, boost function for sensitivity increase

2 channel loop detector, 24VDC, up to 4 frequencies per channel for close loop installations, adjustable sensitivity, boost function for...

CIT-IP EXTERNAL MODULE 1P
P800166

Outdoor IP intercom station, 1 button

RECEIPT PRINTER KIT
D114077

Roll-paper TCP/IP printer for customer's receipt for 30 system. Includes: LAN cable, power supply, paper roll. LAN cable. Power supply, paper roll included.

Roll-paper TCP/IP printer for customer's receipt for 30 system. Includes: LAN cable, power supply, paper roll. LAN cable. Power supply,...

CONTROL DESK IP TOUCH
D114098

IP intercom control Desk - 7" IPS display touch screen

KIT NEA LITE POLE MOUNTING
D114176

Pole mounting kit for Nea Lite camera.

HEATER UNIT
D121711

Heater unit 60W for internal station/POF installation on DIN bar

RELE' TEMP
D121767

Temporized relay (1 switch, 16A 0,1s, 24hrs, multitension)

MAGNETIC LOOP 8MT
D141784

High sensivity pre-cabled magnetic loop (10m tail x 8m loop)

MIFARE PROXIMITY CARD 13,56MHz
D191145

Proximity MIFARE 13,56MHz card for 30 system

FANFOLD GAP TICKETS BFT
D191186

Fanfold ticket box, 4000pcs tickets box with gap & BFT logo

BC BONUS SCANNER SUPPORT
D223127

Table stand for Bc Bonus scanner

TRUCK HEIGHT PEDESTAL 800MM
D413445

800mm height pedestal, with door, for entry/exit column

BUS HEIGHT PEDESTAL 600MM
D413530

600mm height pedestal, with door, for entry/exit column

ROLL THERMAL PAPER SUPPORT PIN
D576215

Support pin for roll thermal paper

ROLL THERMAL PAPER HUB
D576216

Втулка для рулона термобумаги

ROLL THERMAL PAPER HUB
D576216

Втулка для рулона термобумаги

BC BONUS SLAVE
FP205005

Desktop Ticket validator and scanner RS485 ( RS232/RS485 converter, serial cable and power supply are NOT included ). Possibility to associate to the barcode either time or fare discount.

Desktop Ticket validator and scanner RS485 ( RS232/RS485 converter, serial cable and power supply are NOT included ). Possibility to...

BC BONUS MASTER
FP205015

Comes with converter 485. Desktop Ticket validator and scanner including RS232/RS485 converter, serial cable, power supply. Used also to add and additional barcode to a pre-printed ticket either time or fare discount.

Comes with converter 485. Desktop Ticket validator and scanner including RS232/RS485 converter, serial cable, power supply. Used also to add...

QUADRO DETECTOR
FP208003

Loop detector box for counting system (2 channel loop detector included)

CIT-BUS POWER SUPPLY BOX
FP510001

Power supply for digital intercom.

ESPAS TICKET PRINTER
P2010041E

Online ticket & receipt printer to interface (via Usb) through POS manned station; compatible with fanfold ticket with gap The device's function is to print special tickets directly from the parking management software

Online ticket & receipt printer to interface (via Usb) through POS manned station; compatible with fanfold ticket with gap The device's...

ESPAS OFFLINE DISCOUNT PRINTER
P2010042E

Off-line desk thermal printer used to print on the ticket an additional barcode tha gives a discount ( can be time or amount ) on the parking fare. This additional discount ( barcode ) are then deducted either at the POF or at the Exit station.

Off-line desk thermal printer used to print on the ticket an additional barcode tha gives a discount ( can be time or amount ) on the...

TRAFFIC LIGHT PANEL 3 DIGIT DISPLAY MASTER
P22312M5

Panel backlit with crepuscular function and indication of: Free/Empty ( Led light Green/Red ). RS485 interface, 3 digit for spaces. Dimensions: 600x800x55. RS485/RS232 converter, 230VAC power supply. Mounting bracket for pole included.

Panel backlit with crepuscular function and indication of: Free/Empty ( Led light Green/Red ). RS485 interface, 3 digit for spaces....

TRAFFIC LIGHT 2-SIDE PANEL IT
P22316B0

Two-sided luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch. Back-lit panel for night-time visibility. 230V power supply. Omega brackets for pole fixing included.

Two-sided luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with...

TRAFFIC LIGHT 2-SIDE PANEL DE
P22316B1

Two-sided luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch. Back-lit panel for night-time visibility. 230V power supply. Omega brackets for pole fixing included.

Two-sided luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with...

TRAFFIC LIGHT 2-SIDE PANEL EN
P22316B2

Two-sided luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch. Back-lit panel for night-time visibility. 230V power supply. Omega brackets for pole fixing included.

Two-sided luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with...

TRAFFIC LIGHT 2-SIDE PANEL ES
P22316B3

Two-sided luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch. Back-lit panel for night-time visibility. 230V power supply. Omega brackets for pole fixing included.

Two-sided luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with...

TRAFFIC LIGHT 2-SIDE PANEL FR
P22316B4

Two-sided luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch. Back-lit panel for night-time visibility. 230V power supply. Omega brackets for pole fixing included.

Two-sided luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with...

TRAFFIC LIGHT PANEL 3 DIGIT DISPLAY SLAVE
P22319M5

Panel backlit with crepuscular function and indication of: Free/Empty ( Led light Green/Red ). RS485 interface, 3 digit for spaces. Dimensions: 600x800x55, 230VAC . Mounting bracket for pole included. RS485/RS232 converter not included.

Panel backlit with crepuscular function and indication of: Free/Empty ( Led light Green/Red ). RS485 interface, 3 digit for spaces....

TOKENS
P800015

Tokens for ESPAS 10 COIN

ROLL THERMAL PAPER
P800044

Roll thermal paper (3000 tickets) for entry station

485-TCP/IP CONVERTER KIT
P800132

The device allows the insertion within a wired TCP/IP network of devices using an RS-485 serial interface. The solution is used in all those realities where it is necessary to transmit serial data through, for example, a local network already present.

The device allows the insertion within a wired TCP/IP network of devices using an RS-485 serial interface. The solution is used in all those...

BC BONUS LAN
P800136

Desktop Ticket validator and scanner LAN type icluding TCP-IP/RS232 converter, serial cable and power supply. Possibility to associate to the barcode either time or fare discount.

Desktop Ticket validator and scanner LAN type icluding TCP-IP/RS232 converter, serial cable and power supply. Possibility to associate to...

KIT INTERLOCK FOR PARKING
P800137

Kit for manage interlock function (station between two barriers), useful to prevent queues on the gate or for particularly security requirements. It's usable when a third loop management is required (e.g. motorbike). Includes a loop detector for the second barrier safety loop and a kit of terminals in order to connect the commands of the second barrier.

Kit for manage interlock function (station between two barriers), useful to prevent queues on the gate or for particularly security...

KIT DENEB TO DENEB
P800138

Additional board used to communicate between two stations in "Two Ways" and "Double Height" configuration. For 30 system only.

RECEIPT PRINTER ROLL PAPER
P970048

Roll paper for receipt printer. Ext. diam: 80mm. Int.diam: 12mm. Width: 84mm

TRAFFIC LIGHT PANEL IT
P975073

Luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch. Back-lit panel for night-time visibility. 230V power supply. Omega brackets for pole fixing included.

Luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch....

TRAFFIC LIGHT PANEL EN
P975074

Luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch. Back-lit panel for night-time visibility. 230V power supply. Omega brackets for pole fixing included.

Luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch....

TRAFFIC LIGHT PANEL DE
P975075

Luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch. Back-lit panel for night-time visibility. 230V power supply. Omega brackets for pole fixing included.

Luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch....

TRAFFIC LIGHT PANEL FR
P975076

Luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch. Back-lit panel for night-time visibility. 230V power supply. Omega brackets for pole fixing included.

Luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch....

TRAFFIC LIGHT PANEL ES
P975077

Luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch. Back-lit panel for night-time visibility. 230V power supply. Omega brackets for pole fixing included.

Luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch....

TRAFFIC LIGHT PANEL PL
P975078

Luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch. Back-lit panel for night-time visibility. 230V power supply. Omega brackets for pole fixing included.

Luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch....

TRAFFIC LIGHT PANEL HR
P975079

Luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch. Back-lit panel for night-time visibility. 230V power supply. Omega brackets for pole fixing included.

Luminous panel indicating the car park capacity (red-green LED lights). Fitted with red and green LED traffic lights with automatic switch....

KIT POWER SUPPLY NEA LITE / TUVA LITE
P975093

NEA LITE / TUVA LITE power supply kit: junction box IP56 and PGs, power supply 12VDC din rail mounting

LOOP DETECTOR PRO 230V
P111786

Metal object detector, 2 channels, 230VAC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level, boost function for increasing sensitivity, direction of travel management

Metal object detector, 2 channels, 230VAC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level,...

UHF WINDSHIELD TAG BFT
D141860

UHF windshield tag BFT

BOX TICKET 4000 PCS BFT
P800071 00001

BFT ticket box 4000pcs

TRAFFIC LIGHT PANEL 3 DIGIT DISPLAY MASTER - HORIZONTAL
P22322M5

Horizontal backlit panel with crepuscular function and indication of: Free/Empty ( Led light Green/Red ), 3 digit for spaces. RS485/RS232 converter, mounting bracket for pole included.

Horizontal backlit panel with crepuscular function and indication of: Free/Empty ( Led light Green/Red ), 3 digit for spaces. RS485/RS232...

KIT PARKING SERVER
P800139

Accessories kit for Server including: Ethernet switch 8 ports, RS232/RS485 converter with cable and power supply, 10 proximity RFID cards

KIT POS CLIENT
P800140

Accessories kit for POS Client including: barcode reader with auto-trigger function for hand-free use, LAN cable 1,5 mt, USB / RS232 cable.

ROUTER 4G LTE DUAL SIM EXT.TEMP.
D114024

Dual SIM (Micro SIM )router with extendet temperature (-40°C to +70°C) , 4G LTE, 2xEthernet port 10/100Mbps, 1 slot MicroSD, 4G/WIFI anntennas, DIN support and power supply

Dual SIM (Micro SIM )router with extendet temperature (-40°C to +70°C) , 4G LTE, 2xEthernet port 10/100Mbps, 1 slot MicroSD, 4G/WIFI...

RADIOMODEM RTX 868MHz (Slave)
P800141

Modem radio Slave with RS485 interface for data tx without cable connection, to use with COPPIA RADIOMODEM RTX 868MHZ (Master). This device allows, as an example, to exchange data between the Parking server and Traffic light panel. Maximum range is 1500 mtr in case there are no obstacles. Within urban areas the range is limited to 300 mtr. The kit includes: protected IP66 box, support for pole with Dia 60mm, SMA connector and antenna, power supply 12/24VDC.

Modem radio Slave with RS485 interface for data tx without cable connection, to use with COPPIA RADIOMODEM RTX 868MHZ (Master). This device...

COPPIA RADIOMODEM RTX 868MHz (Master)
P800142

2 Modem radio Master with RS485 interface for data tx without cable connection. This device allows, as an example, to exchange data between the Parking server and Traffic light panel. Maximum range is 1500 mtr in case there are no obstacles. Within urban areas the range is limited to 300 mtr. The kit includes: 2 devices with protected IP66 box, support for pole with Diam. 60mm, SMA connector and antenna, power supply 12/24DC.

2 Modem radio Master with RS485 interface for data tx without cable connection. This device allows, as an example, to exchange data between...

TRAFFIC LIGHT PANEL 3 DIGIT DISPLAY SLAVE - HORIZONTAL
P22329M5

Horizontal backlit panel with crepuscular function and indication of: Free/Empty ( Led light Green/Red ), 3 digit for spaces. RS485/RS232 converter NOT included. Mounting bracket for pole included.

Horizontal backlit panel with crepuscular function and indication of: Free/Empty ( Led light Green/Red ), 3 digit for spaces. RS485/RS232...

SOFTWARE INSTALLATION
A200001 20004

The SOFTWARE INSTALLATION service includes the installation of a software module by one of our technicians.

MONITOR FULL HD 21.5" WITH HDMI CABLE
P800145

21.5" Full HD Monitor with HDMI cable.

UHF ISOCARD TAG - 25pcs
P800146

ISO card tag for UHF Antennas. Kit with 25 flexible and anti-humidity tags

TRAFFIC LIGHT 2 LED 100MM
385251

Traffic light with two LED lights (red - green) with high brightness for transit regulation. Complete with LED lamps. Diam. 100mm

TRAFFIC LIGHT 3 LED 100MM
385256

Traffic light with three LED lights (red - red - green) with high brightness for transit regulation. Complete with LED lamps. Diam. 100mm

ANALOGUE TO SIM GSM TELEPHONE COMBINER
P800156

Telephone combiner which converts the GSM signal to an analogue line, using a SIM card (not included). Can be used with CIT-BUS digital intercom systems. Built-in antenna, 10.7 to 27.6 V power supply (power supply unit included).

Telephone combiner which converts the GSM signal to an analogue line, using a SIM card (not included). Can be used with CIT-BUS digital...

ETHERNET SWITCH 8P
D112099

Ethernet Switch, 8 Ethernet Ports.

MOUSE AND KEYBOARD KIT
P800157

Kit includes USB mouse and keyboard, colour black.

RS232 TO USB CABLE CONVERTER
P800158

RS-232 to USB cable converter. Used to connect devices with serial interface and DB9 connector.

POWERED USB HUB
P800160

7-port USB 2.0 hub, used to connect USB devices to laptops and PCs. Includes wall power adapter to ensure a stable connection even when using all ports. System requirements: Windows 10,8,7 or Vista, USB port.

7-port USB 2.0 hub, used to connect USB devices to laptops and PCs. Includes wall power adapter to ensure a stable connection even when...

ROAD ENCLOSURE WITH INSPECTION PLINTH
P800161

Road enclosure with inspection plinth. Lock with retractable handle and closing at three points. Resistance to weather, ageing and corrosion. Floor mounting frames to order separately. Dimensions: 546 x 1110 x 308 (W x H x D) Max load applicable on bottom wall: 65 kg

Road enclosure with inspection plinth. Lock with retractable handle and closing at three points. Resistance to weather, ageing and...

FLOOR MOUNTING FRAMES FOR ROAD ENCLOSURE
P800162

Floor mounting frames for road enclosure in steel with double protection treatment: galvanic treatment covered with a layer of epoxy paint. Screws in AISI 304 stainless steel.

Floor mounting frames for road enclosure in steel with double protection treatment: galvanic treatment covered with a layer of epoxy paint....

LBA FIXING BRACKET
394071

RS-485/RS-232 CONVERTER
P800172

QUADRO STAZIONE BACKUP
P800175

Il Quadro Stazione Backup viene utilizzato quando risulta necessario impiegare due stazioni in uno stesso varco, una delle quali utilizzata come backup. Il Quadro è completo di alimentatore, 24Vdc, sezionatore, relè e morsetti per il cablaggio.

Il Quadro Stazione Backup viene utilizzato quando risulta necessario impiegare due stazioni in uno stesso varco, una delle quali utilizzata...

TRAFFIC LIGHT 2 LED 200MM
P800174

Semaforo di pista a due luci LED (rosso - verde) ad elevata luminosità per regolazione del transito. Completo di lampade a LED. Diam. 200mm.

Timer
P130024

Weekly programmer for REEL RADIO or external ER-1 receiver

CLIP B 00 R04
N999522

Wall mounting clip for KLEIO B RCA and MITTO B RCB remote controls. 30 unit pack

CLIP1 B 00 R03
N999521

Clip for hooking KLEIO B RCA and MITTO B RCB series remote controls to belt or sun visor. Supplied in pack of 30pcs

MIME PAD
P121028

4-channel wall-mounted radio control with rolling code

SFQ
N999070

Set of SD and QSG panel fixing brackets

CP SD
N999369

Set of cable clamps for SD panel

UNIPOWER
D121501

U-PROG
P111529

Programmer for radio control units and receivers with possibility of wired or BlueTooth connection

CPEM
D223066

Control panel box for control units. Dimensions 195x237 mm depth 100 mm

CBOX DUO
D223237

Scatola quadro per centrali di comando con doppio piano di lavoro. Dimensione 290x197 mm profondità 123 mm.

CBOX FLAT
D223237 00001

Scatola quadro per centrali di comando. Dimensione 290x197 mm profondità 123 mm.

CPEL
D223072

Large control panel box for control units. Dimensions 315x218 mm depth 125 mm

AXXEDO POWER
D121696

24 V 2 A switching power supply for DIN rail mounting

KABP
P125042

Battery adapter wiring kit necessary for PHEBE BT A with built-in control unit and for BBT BAT

VIRGO BAT
P125008

Set of backup batteries for VIRGO

HIDE SL BAT
P125049

Back-up battery kit for HIDE SL

BT BAT
P125005

Back-up battery kit for HYDRA N, ARGO, VENERE BT A DIS

BT BAT1
P125007

Emergency battery kit for HYDRA N CPEL, only for external board not compatible with board on motor

ECOSOL CHARGER
N999477

Battery chargers for ECOSOL BOX and ECOSOL DOUBLE

MCL BT A BAT KIT
P125038

Set of backup batteries for MICHELANGELO BT A barriers

BAT KIT 2
P125011

Set of backup batteries for MICHELANGELO BT A barriers

BT BAT2
P125009

Set of backup batteries for ARES

SB BAT
P125002

SB BAT emergency battery kit for DEIMOS BT

BBV SLC TL
P111503

Battery powered anti-panic device for VISTA SL C, TL

BBT BAT
P125020

Set of backup batteries for THALIA, THALIA P, ZARA and PHEBE

BBV SW 350 MXL
P111564

Emergency battery kit for Vista SW MXL, compatible with SXL with external installation

BBV SW 260
P111795

Emergency battery kit VISTA SW 260.

SL BAT2
P125035

Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.

GIOTTO M BG BAT KIT
P120074

Buffer battery kit for Giotto BT A series barrier

BATT-EB
P975005

Backup battery kit to allow bollards to stay up in case of no power

BBV BATT MODULO VISTA SL
P111768

Set of backup batteries for VISTA SL

BBV BATTERY VISTA SLK MODULE
P111803

Emergency batteries kit.

BBV BATT. MODULO VISTA SLK MONTATO
P111803 00002

BBV BATT. MODULO VISTA MONTATO
P111768 00002

BT BAT 3
P125047

Built-in penlight battery for Botticelli BT A for emergency operation. Enables 2 movements to be made. Max. duration 12 hours in standby mode in the event of a prolonged power cut.

Built-in penlight battery for Botticelli BT A for emergency operation. Enables 2 movements to be made. Max. duration 12 hours in standby...

STR
N190106

Pair of infrared STR sensors for ERIS A30

VENTIMIGLIA NS
P111401 00001

Infrared device for BIR C or BAR C safety edges (conforms to EN 12978 Standard)

PRC2
P111042

Pneumatic relay for BAR edge with 2 pressure switches

FLEX6
D141160

6x0.5 mm² extensible spiral cable for industrial sectional doors. Max. extension 6 m

ECB SX
D121017

Left-hand horizontal solenoid lock, 12/24 V

ECB DX
D121016

Right-hand horizontal solenoid lock, 12/24 V

ECB VERTICALE
D121018

Vertical solenoid lock, 12/24 V

SCT
N733189

Release for ELI AC A, ELI BT A and SUB BT with personalized key.

CSE 52 (EXTERNAL RELEASE EBP 52 MM)
P123033

Key cylinder for external release for gates of max. thickness 50 mm. Also includes internal key cylinder with same key number.

CSE 75 (EXTERNAL RELEASE EBP 75 MM)
P123034

Key cylinder for external release for gates of max. thickness 75 mm. Also includes internal key cylinder with same key number.

SCC
N733392

Release for ELI AC A, ELI BT A and SUB BT with lever key.

CLS
D610180

Triangular release key l=52 mm

CLS/82
D610256

Triangular release key for SUB operators l=82 mm

ST
P115003

Automatic bolt release for sectional doors

SET/S
N733069

External release for insulated sectional and overhead doors of thickness up to 50 mm.

RCA
N733421

Lever release with steel cable, length 3,5 m. Compatible with BOX.

RCAL
N733422

Lever release with steel cable, length 7 m. Compatible with BOX.

SM1
P115005

External manual release for overhead garage door (1 operator)

SM2
P115001

External manual release for overhead garage door (2 operators)

SEB
N733020

External key release for BERMA, FORB, IGEA LB and IGEA LB BT

SCP
N733502

Release for ELI AC A, ELI BT A and SUB BT with personalized key.

CRC SPARE KEY
D531097 00001

Release key for INTRO model key selector and EBP model electric lock.

SIBOX
N574005

Empty wall-mounted safe for external release and control keypad Dimensions 179,5 x 122 x 92 mm

MOX
N733036

External release system to be inserted in SIBOX safe

BOX
N574039

Wall cabinet for release with steel cable and electric control; cable not included

SAFM
N733955

Cable release for ARGO, length 3.5 m.

SAFM L
N733956

Cable release for ARGO, length 7 m.

SPIRA 2X1
D110926 00001

Magnetic loop 2 x 1 m

LOOP DETECTOR PRO MONOCANALE
P120112

Single channel metal object detector with advanced functions to check coil perimeter and instant reading of the inductivity.

RME 1 BT
P111274

24 V single channel metal object detector with installation base

RME 2
P111001 00003

230 V dual channel metal object detector with installation base

U-BASE
P111510

Software for bluetooth programming and managing of control unit, receiver and transmitters. USB key included

CEM
394220

Control unit with break-glass system fitted with emergency button

PEM
P111810

Emergency button for manually operating the leaf if required.

ALLU2 Maxima
P120083

Power supply for ATM LIGHT Kit on Maxima Ultra

GT BOARD
P120116

Power supply unit for LIGHT PS/ES lights for Giotto Ultra 36

ALLU MAXIMA
P120069

Power supply for ATM LIGHT Kit on Maxima Ultra

ALLU
P800104

Power supply for fixed bollards.

ALLU K12
P975069

Power supply for fixed Ranch E bollards

ALLU 2 MAXIMA ULTRA
P120075

Power supply for ATM LIGHT Kit on Maxima Ultra

AMV
N998600

Virgo Smart BT A 20 mechanical stop KIT

TFS
P111775

Virgo Smart BT A 3-wire board KIT (1 Kit per engine)

LAS
N728052

VIRGO BT A slide lever

AAP
N999735

VIRGO SMART BT A misaligned doors accessory

CKK
N999592

Pack of tabs for ARGO series and PEGASO series operators

CA2C
N733041

Accessories for the installation of two BERMA series operators on overhead door (curved arms)

DIMA PRO36
P120088

Foundation template and clamps for installation of Maxima Ultra 36 barriers.

PRV TL T
P111660

Vista tl anodised closing profile, length 6,8 m

SPRV TL T
P111661

Profile closing brackets, 5pcs

KIT ML MCL40
P120072

Spring kit for conversion from Michelangelo 60 to Michelangelo 40

PRV AA TL
P111717

Wing attachment profile for Vista TL, 5100 mm long

PRV AA SL
P111681

Leaf attachment profile for Vista SL.

FCS MAXIMA 5
P120033

2 additional limit switches for MAXIMA 30/MAXIMA ULTRA 35

CA1
N733038

Straight arm accessories for installation of one BERMA series operator on overhead door of 4 m max width

CA2
N733040

Straight arm accessories for installation of two BERMA series operators on overhead door

THEKE B PRA 01
P125018

Metal protection box for ARES and ICARO series sliding operators

Crown MAXIMA U36
P940095 00000

Cap without lights for Maxima Ultra 36.

Crown MAXIMA U36 INOX
P940095 00200

Cap without lights for Maxima Ultra 36 INOX.

Crown RGB MAXIMA U36
P940095 00003

Cap with RGB lights for Maxima Ultra 36. Functions: flashing, traffic light, diagnostics.

Crown RGB MAXIMA U36 INOX
P940095 00203

Cap with RGB lights for Maxima Ultra 36 Stainless Steel. Functions: flashing, traffic light, diagnostics.

Crown MAXIMA U36 RAL
P940095 00100

Cap without lights for Maxima Ultra 36. Custom RAL

Crown RGB MAXIMA U36 RAL
P940095 00103

Cap with RGB lights for Maxima Ultra 36. Custom RAL. Functions: flashing, traffic light, diagnostics.

TSWP 350 XL
P111568

Profiles Vista SW double, 1,5 m.

TSWP XL 260 PROFILES VISTA SW 260 DUAL
P111793

Profiles Vista SW double, 1,5 m.

CTO BAT NO BAT
P125025

WMP SL SLC
P111680

Contains 2 crossbeam support profiles of length L = 1 m each

FCS MAXIMA 6-8
P120034

2 additional limit switches for MAXIMA 60/80

SRV DIN
P120032

Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply terminals, socket for metal mass detector and standard input/output terminal block

Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply...

FCS MU68
P120035

2 additional limit switches for Maxima Ultra 6 - 8 m

Sensore di temperatura per Rigel 6
P111774

Traffic light or preheating management card (one function excludes the other) 230V hydraulic motors for RIGEL5

REM 2048
P111826

Memoria per centrale di comando a 2048 posizioni, ideale per installazione con grande afflusso di persone.

SCS 1
P111376

Serial board for connection to zone and opposing leaves for control units with display While stocks last

SCS 1 MA
P111377

Board for connection to more than two checked photocell copies for DEIMOS BT and ARES While stocks last

SSR5
D111704

Control card traffic light or pre-heating hydraulic motors AC with Rigel 5

TLB
D113727

Traffic-light management board for THALIA, THALIA P and LEO CBB.

ME
D111013

Control board for 12Vac solenoid lock for 230V automation systems

ME BT
D111761

Control board for 24Vac solenoid lock for 24V automation systems

SCS
P111323

Serial connection board for HYDRA R

ECOSOL DOUBLE
D113732

Expansion board with batteries Included

ECOSOL DOUBLE
D113732

Expansion board with batteries Included

SCHEDA MCL KIT
P120009

Control board for KIT MCL LIGHT and KIT MCL LAMPO

FLC 8K2
P111400

Interface for connecting one or more 8K2 type edges

RAU
P111449

Wired connection board for BFT plug-in receivers

ME110
D111501

ME110
D111501

BAT KIT EFO
P800113

Reflector and support for wall mounting and mounting on CC post for CELLULA RFL

S RFLP
P111409

Reflector for CELLULA RFL reflective photocell.

ACV30
P111538

Vandal-proof protection for AKTA photocells

ACV20
P903024

Vandal-proof protection for DESME photocells

PHP BI
P903022

Dual-face adapter for THEA/DESME photocells

KIT BARR RFL
P120007 00001

Support for fitting CELLULA 130 on MICHELANGELO enclosure in line with boom

KIT BARR RFL
P903015 00001

Support for fitting RFL on MICHELANGELO enclosure in line with boom

ADA CC A
P903032

Pair of adapters for the installation of THEA, DESME and COMPACTA photocells on CC posts

ADA PHP A
P903033

Pair of adapters for the installation of THEA, DESME and COMPACTA photocells on PHP posts

BMC A
P903031

Support for mounting COMPACTA series photocells on wall and on Giotto, Moovi and Michelangelo barriers

PHP2
P903019

Pair of double aluminium posts for THEA/DESME series photocells. Height 1038 mm

PHP2 A
P903029

Pair of double aluminium posts for THEA, DESME and COMPACTA series photocells. Height 1038 mm

APL
P903020

Pair of foundation plates for PHP posts

PFC SL MOUNTING PLATE ON PRV PROFILE
P111804

Additional kit of plates for fixing traveller on profile boom attachment PRV AA.

CCI
D221573

Recessed container for CELLULA 50 and INTRO.

CM RFL
P903014

CELLULA RFL wall mounting support

CC RFL
P903013

CELLULA RFL and S RFLP mounting support on CC posts

PHP ADA
P903025

Pair of adapters for the installation of AKTA photocells on PHP posts

PHP BA1
P903023

Support for mounting THEA/DESME photocells on Giotto, Moovi and Michelangelo enclosures

PHP A
P903028

Pair of aluminium posts for THEA, DESME and COMPACTA series photocells Height 522 mm

ADA PHP MURA
P903034

Pair of adapters for installing MURA photocells on PHP series posts.

CCI MURA CONTAINER FLUSH-FIT
P111815

Pair of recessed housings for MURA photocells.

PT130
P111058

PROTECTION COVER FOR FL130B

PHP3
P903026

Pair of aluminium columns for Q.bo series selectors. Height 1038 mm

PHP4
P903027

Pair of aluminum columns of different heights, for Q.bo series selectors and DESME and THEA series photocells. Column for selector: height 1038 mm, column for photocells: height 552 mm

Pair of aluminum columns of different heights, for Q.bo series selectors and DESME and THEA series photocells. Column for selector: height...

PHP4 A
P903030

Pair of aluminum posts of different heights, for Q.bo series selectors and THEA, DESME and COMPACTA series photocells. Column for selector: height 1038 mm, column for photocells: height 552 mm

Pair of aluminum posts of different heights, for Q.bo series selectors and THEA, DESME and COMPACTA series photocells. Column for selector:...

IT23
P111399

Connection interface for CELLULA RFL in accordance with EN12453 Standard

DCW BAT
N999465

Pack of 12 batteries for photocell safety edge, compatible with DCW, TANGO, ERIS A30

CELLULA 50
P111272

Pair of built-in adjustable photocells (range 30 m) Power supply 24 V ac

REFLECTA
REFLECTA

Fotocellula a rilfessione per applicazione esterna. Portata 12m. Alimentazione 24V ac/dc. Possibilità di orientare il fascio in 3 direzioni: frontale, destra 90°, sinistra 90°. Il catarifrangente è incluso nella confezione.

Fotocellula a rilfessione per applicazione esterna. Portata 12m. Alimentazione 24V ac/dc. Possibilità di orientare il fascio in 3 direzioni:...

CELLULA RFL
P111391

Reflective photocell for external application (range 12 m) Power supply 24 V ac/dc (requires S RFLP P111409)

KIT FPA1
P111683

FPA kit with pair of photocells and brackets for Vista

FRA1 1 PHOTO CELL BFT+AMPLIFIER
P111265

FPA kit with pair of photocells and brackets for Vista

FRA2 2 PHOTO CELL BFT+AMPLIFIER
P111266

FPA kit with pair of photocells and brackets for Vista

KIT FPA2
P111685

FPA kit with two pairs photocells and brackets for Vista

SPC
D121611

External button panel with 2 start-stop buttons.

SPC2
D121612

External button panel with 2 open-close buttons.

SPCE
D121613

External button panel with mushroom-head emergency button.

SPC3
D121619

Open stop close button panel.

COMPASS - CUSTOM ISOCARD
D110912

ISO standard proximity badge

COMPASS - RING
D110914

Key-ring transponder for access control

LCM
D121011

Magnetic key reader. For column mounting - see mod. CLC

CM
D121012

Magnetic key for LCM reader

MAK-2
394056

2-channel metal mass detector supplied with base. 230 V power supply.

SPIRA-PRO
394060

Professional magnetic coil with neoprene rubber protection and dual isolation for magnetic detector. Dimensions: 5x6 m (IP67)

SPIRA-STD
394062

Standard loop for detecting metal masses. Dimensions: 6x8 m

Timer
394210

Weekly time programmer to automatically move the bollards. Complete with display configuration menu.

PUSH PLATE
P111677

Activation button

KIT LIGHT1
P120001 00002

Lights for booms over 4,5 m

KIT LIGHT
P120001 00001

Lights on boom 3 - 4,5 m

MCL LAMPO KIT
P120006

Integrated flashing light. The MCL CARD KIT is needed for operation

MCL LIGHT KIT
P120005 00001

Light kit (6 lights) for boom. For use in conjunction with PCA. The MCL CARD KIT is necessary for operation

ACOUSTIC DETECTOR
D113705

Adjustable acoustic detector for sirens

SLM2
D123013

Wall-mounted bracket for LAMP NET flashing beacon

CMS
D831020

Sign

B 00 R02
P123025

Wall mounting for B LTA series flashing beacons

STOPPY ALARM
P800075

Anti-theft kit: to be ordered separately, assembled during production

ANEM
P111182

Anemometric ​​sensor with encoder for wind

CREP
P111183

Twilight sensor

CLONIX 2
D111662

Two-channel receiver with plug 433 MHz rolling code. 128 position memory. 24 Vac power supply.

RTD CA 2048
D113671 00002

Four-channel rolling code receiver with 2048 codes and built-in programming display. Usable with COMPASS

CLONIX 2 2048
D111664

Dual channel 433 MHz rolling code plug-in receiver. 2048-position memory 24 Vdc Vac power supply.

MOP
D111713 00001

Accessory for adding an output channel to RTD

AEL 433
D113632

Antenna for 433 MHz radio remote control with 4 m cable

RE/T
D111144

TP RFID KEY TAG
D110981

RFID badge.

BDG BADGE FOR VISTA EMERGENCY - 10 PCS
P111811

Badge for modifying the switch functions, normally protected against accidental settings changes.

An unexpected error occurred: please reload the page or try again later.