MITTO

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices


433 MHz rolling code remotes for automatic gates, garage doors and other automated devices

Complete range of remote controls, 433MHz rolling code. Available with 2 or 4 channels.

Technologies
  • Rolling Code
  • ER - READY
  • For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.

  • The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

Products list
433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R1 CLEAR ICE

Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Colour clear ice white. Buttons panel can be customised with own design/logo.

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R1 SUNRISE

Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: sunrise yellow

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R1 VINEYARD

Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: vineyard red

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R3 4CH 100PZ

Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Pack of 100pcs numbered for block memorisation.

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R2 REPLAY

Copyable transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R1

Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB02 R3 2CH 100PZ

Transmitter 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Pack of 100pcs numbered for block memorisation.

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB02 R2 REPLAY

Copyable transmitter 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB02 R1

Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R6 RAINBOW

Pack of four MITTO 4 transmitters in the four BFT colours: vineyard red sunrise yellow clear ice white deep sea blue

Accessories

Recommended accessories.

CLONIX 2E AC U-LINK 230
D113807 00002

433 MHz external receiver, compatible with U-LINK protocol (features 3 connection ports). 230 V Power supply, can store up to 2,048 remote controls

433 MHz external receiver, compatible with U-LINK protocol (features 3 connection ports). 230 V Power supply, can store up to 2,048 remote...

CLONIX UNI AC U-LINK 230V
D113808 00003

433 MHz external receiver via 3 outputs: 2 with NO contact and one with configurable NO/NC contact. Compatible with U-LINK protocol (features 3 connection ports). Power supply, 230 V, can store up to 2,048 remote controls

433 MHz external receiver via 3 outputs: 2 with NO contact and one with configurable NO/NC contact. Compatible with U-LINK protocol...

CLONIX 4 RTE
D113718 00002

External 4-channel 433 MHz rolling code receiver. 16 A Power relay outputs. 230 V Power supply.

CLONIX 2E
D113674 00001

External two-channel 433 MHz rolling code receiver. 128 position memory. 24 Vpower supply.

U-BASE
P111510

Software for bluetooth programming and managing of control unit, receiver and transmitters. USB key included

U-PROG
P111529

Programmer for radio control units and receivers with possibility of wired or BlueTooth connection

An unexpected error occurred: please reload the page or try again later.