PEGASO B CJA UP

Max. opening speed 24rpm and max. torque 70Nm (Pegaso B Cja625); max. opening speed 24rpm and max. torque 100Nm (Pegaso B Cja 645). Dead man switch Electromechanical operator for semi-intensive use, for automation of industrial sectional doors up to 25 m² (Pegaso B Cja 625) or up to 45 m². Limit switches with absolute encoder, with the possibility of rapid adjustment from floor.

Main features

Management system for stop and intermediate limit switches based on absolute encoder technology with settable zero position.

Control unit with deadman feature on-board operator

Ready-to-use cables with quick-fit connectors.

Products list

    Electromechanical operator, deadman, for industrial sectional doors with max surface area 20 m² and use Semi intensive. Power supply 230 V. max speed 33 Rpm. max torque 50 Nm. Chain release. IP54

      Electromechanical operator, deadman, for industrial sectional doors with max surface area 25 m² and use Semi intensive. Power supply 230 V. max speed 24 Rpm. max torque 70 Nm. Chain release. IP54

        Electromechanical operator, deadman, for industrial sectional doors with max surface area 25 m² and use Semi intensive. Power supply 230 V. max speed 24 Rpm. max torque 70 Nm. Double cable release. IP55

          Electromechanical operator, deadman, for industrial sectional doors with max surface area 45 m² and use intensive. Power supply 400 V. max speed 24 Rpm. max torque 100 Nm. Chain release. IP54

          Accessories

          PEGASO CABLE MONO
          D121631

          Pre-wired power supply cable for PEGASO single phase operators. Length 1 m

          COMPACTA A20-180
          P111782

          Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

          PEGASO CABLE TRI
          D121632

          Pre-wired power supply cable for PEGASO three-phase operators. Length 1 m

          PEGASO UP CONTROL 5
          D121624

          Cable with pre-wired OPEN - STOP - CLOSE keypad for PEGASO UP operators. For adjusting motor limit switches from floor level. Length 5 m

          PEGASO UP CONTROL 10
          D121625

          Cable with pre-wired OPEN - STOP - CLOSE keypad for PEGASO UP operators. For adjusting motor limit switches from floor level. Length 10 m

          PEG CCP
          N999468

          Extension for PEGASO C operators release chain. Length 4 m

          PIG 12/ULISSE S
          N733338

          Z12 pinion gear for reduction on industrial sectional doors, for 1 " (25.4 mm) shafts

          PIG 14/ULISSE S
          N733336

          Z14 pinion gear for reduction on industrial sectional doors, for 1 " (25.4 mm) shafts

          PIG 18/ULISSE S
          N733339

          Z18 pinion gear for reduction on industrial sectional doors, for 1 " (25.4 mm) shafts

          PIG 30/ULISSE S
          N733337

          Z30 pinion gear for reduction on industrial sectional doors, for 1 " (25.4 mm) shafts

          COR 30
          N733148

          Z30 gear kit with accessories for industrial sectional doors, for 1 " (25.4 mm) shafts

          COR 40
          N733149

          Z40 gear kit with accessories for industrial sectional doors, for 1 " (25.4 mm) shafts

          SFZ
          N733121

          Additional fixing bracket kit. To be used on chain drive installations.

          PEGASO ADA
          N733449

          PEGASO ADA adapter for installation on doors with 1"1/4 shaft

          An unexpected error occurred: please reload the page or try again later.