MAXIMA ULTRA 68 SM

Product code P940074 00002

230 V Electromechanical barrier with asynchronous three-phase motor and inverter, for from 4 to 8 m. Opening time from 4.5 to 6 s with Yes deceleration. Maximum barrier length: 8 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version without spring. Colour RAL 7015.

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies

For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.

Motor rotation constantly under control The inverter is an electronic device allowing motor rotation speed to be controlled at any moment, ensuring safety and reliability of the installation, and even extending its life. This is because the inverter reduces the stresses on mechanical parts, subjecting them to less stress. The system also allows management of automation opening and closing times.

Allows precise control and management of bar/boom speed in a specific range of Bft barriers and also provides excellent dynamic performance in acceleration and slowdown, ensuring extreme quietness.

The device included in a specific range of Bft barriers, offering great durability in being maintenance free; it ensures extreme quietness and irreversibility of movement.

Together with irreversibility of the reduction unit, this device included in a specific range Bft barriers provides intrinsic anti-vandal protection, preventing unauthorised opening of the gate.

This device, included in a specific range of Bft barriers, allows the motor to be maintenance-free and offers extreme reliability and quietness. It can also be used in hazardous areas, as it does not produce sparks.

A contactless high-resolution device for detecting obstacles. It ensures rapid reversing of motion and improves smoothness of overall movement during acceleration and slowdown.

technical design
Control unit CSB-XT
Motor power supply 230 V
Power consumption 300 W
Motor type Three-phase asynchronous
Gear unit type In oil bath
Inverter Yes
Slowdown Yes
Locking Mechanical
Release Inside the structure
Impact reaction encoder
Frequency of use very intensive
MCBF (Mean Cycles Between Failures) 2000000 Op
Protection rating IP54
Environmental conditions -30 ÷ 60 °C
Interconnectivity Yes
Clear opening from 4 to 8 ft
KIT ATM LIGHT 3 R/G 2W
Cod. P120077 00001

Red-green LED lights kit for fitting on ATM bars up to 3m.

KIT ATM LIGHT 5 R/G 2W
Cod. P120077 00002

Red-green LED lights kit for fitting on ATM bars up to 5m.

KIT ATM LIGHT 8 R/G 2W
Cod. P120077 00003

Red-green LED lights kit for fitting on ATML bars up to 8 m.

MLC7.5
Cod. P120059

White spring - MAXIMA Ultra 68. Ref. spring table

MLC9
Cod. P120060

Yellow spring - Maxima Ultra 68. Ref. spring table

MLC9.5
Cod. P120061

Violet spring - Maxima Ultra 68. Ref. spring table

ADJ-FOOT
Cod. P120093

Suspended cushioned telescopic supporting foot for BOOM PS booms.

ATML60
Cod. P120041

Aluminium bar L = 6 m Ø92 mm. Lights and rubber not included. Completely protected by new polystyrene packaging.

ATML EXT2
Cod. P120042

Extension L=2m for bar model ATML 60. Lights and rubber not included.

OMEGA ATML U
Cod. P120046 00001

Single clamping, hand guard and screws for ATML bar on MAXIMA 68 ULTRA. Bar not included.

OMEGA FRC ATML U
Cod. P120047 00001

Fork clamping for ATML bar on barrier model. MAXIMA 68 ULTRA. Bar not included.

PCA ATM 3
Cod. P120053 00001

Rubber protection (red) for fitting on bar L = 3 m max.

PCA ATM 5
Cod. P120053 00002

Rubber protection (red) for fitting on bar L = 5 m max.

PCA ATM 8
Cod. P120053 00003

Protection rubber (black) for fitting on bars from L = 6÷8 m.

ALLU 2 MAXIMA ULTRA
Cod. P120075

Power supply for ATM LIGHT Kit on Maxima Ultra

EBB KIT ATML
Cod. P120079

Electric lock for ATML rods to be installed on an FAF UNI R adjustable fork.

FAF UNI R
Cod. P120080

Universal adjustable fork for all rods; recommended with installation of FULL SKIRT accessory.

GA ATM
Cod. P120050

Adjustable suspended foot, powder coated cataphoresis treated.

RST ATM
Cod. P120049

Aluminium rack. Price for 3 metres. Suspended foot not included. Compatible with ATML and ATM model bars.

SRV DIN
Cod. P120032

Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply terminals, socket for metal mass detector and standard input/output terminal block

Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply...

FCS MU68
Cod. P120035

2 additional limit switches for Maxima Ultra 6 - 8 m

BARRIERS Range of road barriers
BARRIERS Range of road barriers
Download
Maxima Ultra 36
Maxima ultra 36
Show

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.