DEIMOS BT A400
Product code P925222 00002Operator 24 V for sliding gates up to 400 kg in weight. Leaf speed 12 m/min.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partner
The thrust required to operate safely.
A smart torque management system based on the microprocessor technology of BFT control units.
Acquiring data from several indicators, it updates the level of thrust required to perform the operation.
D-Track also facilitates the installer in providing for the certifications required by law.
Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.
BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor.
A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles.
The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.
| Control unit | HAMAL |
| Board power supply | 230 V |
| Supply voltage AC | 24 V |
| Power input | 50 W |
| Max. door/gate weight | 400 kg |
| Gate speed | 12 m/min |
| Type of limit switch | Electromechanical |
| Pinion module | 4 |
| Slowdown | Yes |
| Locking | Mechanical |
| Release | Lever-operated with personal key |
| Impact reaction | D-Track |
| Frequency of use | intensive |
| Protection rating | IP24 |
| Environmental conditions | -20 ÷ 55 °C |
| U-Link | no |
HAMAL
CP Cod. D221073plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
Max. load capacity 600 kg.plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
Max. load capacity 600 kg.
CVZ-S Cod. N999320steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
Max. load capacity 800 kg.steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
Max. load capacity 800 kg.
SFD Cod. N999151Base plate for DEIMOS series (supplied with operator).Base plate for DEIMOS series (supplied with operator).
SL BAT2 Cod. P125035Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.
CVZ Cod. D571053steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports.
Max. load capacity 1000 kg.steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports.
Max. load capacity 1000 kg.
