Панели управления

Панель управления одного привода 24 В для гаражных ворот

Control panel with display for one or two 24V electromechanical operators used on 230V swing gates. There are two power modules, which are interchangeable and can operate all motors. The radio receiver is incorporated and the memory of the remote controls is removable and expandable. It has an anti-crushing system based on D-Track technology, it controls the slowing down when opening and closing and has an electronic self-learning function. The main functions include automatic closing, fast closing, partial opening and hold-to-run operation. This panel can be programmed using Bluetooth or remotely via wifi/GSM using a dedicated app. The product complies with the new energy efficiency regulations and therefore has a power consumption on standby of less than 0.5 W.

Control panel with dip switches and potentiometers for one or two 24V operators for swing gates Application: control panel for one or two 24V operators for swing gates Board power supply: 230V single-phase. Operators power supply: 24 VDC, max. 180 W for each operator. Main functions: automatic closing, functions: automatic closing, fast closing, hold-to-run operation Compatibility: LIBRA C MA, LIBRA, LIBRA R, LIBRA MA R Main features: removable terminal block with new colour-coding, simplified dip switch programming and built-in receiver, anti-crush system with D-Track technology, slowdown during opening and closing and electronic learning, pedestrian control by remote control only, electronic lock management. The product complies with the new energy efficiency regulations and therefore has a power consumption on standby of less than 0.5 W.

Встроенный блок управления шлагбаумами серии Maxima

Панель управления с триммером и DIP-переключателем для привода 230 В 70 Вт

Панель управления с дисплеем для одного привода 230 В 70 Вт

Блок управления для пешеходных дверей.

Control panel with display for one or two 24V electromechanical operators for 230V/200W overhead garage doors. The dual-channel radio receiver is incorporated. It has a crush-proof system based on D-Track technology, controls the slowing down when opening and closing and has an electronic self-learning function. The main functions include automatic closing, fast closing, pulse blocking, pulse locking and locked shut maintenance. Supports the U-LINK and EELINK protocols.

Control panel with dip switches and potentiometers for one or two 230V/500W operators used on sliding and swing gates, shutters and overhead doors with the management of up to two sensitive edges (one of which type 8K2). The dual-channel radio receiver is incorporated. With the potentiometers, we can manage not only the automatic closing time but also the strength of the gates and slowing down time. Functions include the pedestrian opening (only remote controlled), fast closing and the pulse blocking function. The detection of faults is done via LED.

Панель управления с дисплеем для 1 или 2 приводов, встроенных в Virgo.

Control panel with dip switches and potentiometers for one or two 24V electromechanical operators for 230V/80W swing gates. The dual-channel radio receiver is incorporated. The torque is electronically adjusted with an obstacle detection system. The strength of the gates and slowing down space can be adjusted with the potentiometers. Key functions include automatic closing, fast closing, pulse locking when opening and pressure surge when opening. It supports the EELINK protocol.

230V/1200W power supply board that allows for up to 2 engines for shutters or engine units to be controlled using a three-position diverter.

Control panel wit display for a 230V/750W operator used on sliding gates, industrial sectional doors and automatic barriers, with obstacle detection function achievable with sensitive edge or BFT encoder. The command inputs can be configured, the radio receiver has rolling code technology incorporated into it and the terminal boards are coloured and can be removed to make it easier to perform the wiring.

Control panel with display for one or two 230V used on electromechanical or hydraulic parking bollards. It can deal with up to four bollards simultaneously (or two in the case of the Xpass 1200 models) and has configurable outputs and a connector for a 433 MHz radio receiver with optional 2048 code memory.

Панель управления 230 В / 470 Вт максимум для одного привода для рольставней или рольворот

Универсальная панель управления с потенциометром для одного однофазного привода 230 В

Универсальная панель управления с дисплеем для одного или двух приводов для распашных или откатных ворот 230 В 600+600 Вт. Основные характеристики: съемные клеммные колодки, программирование и диагностика с помощью дисплея, встроенный четырехканальный приемник, подключение электрического английского или магнитного замка, электронный ограничитель крутящего момента, электронное торможение при открытии и закрытии, отдельные входы концевых выключателей для каждого двигателя, возможность семафорного управления и предварительного подогрева гидравлических приводов, недельный таймер, возможность удаления какого-либо пульта дистанционного управления, настройка 4-х радиоканалов, настройка действия программируемого по времени выхода, регулируемая чувствительность к препятствию.

Control board for 230V and 1200W operator for rolling shutters with maximum manoeuvrable power supply. Main characteristics: Dedicated output for the blinker, availability of open, start, photocell and safety edge (tested) inputs, antenna and receiver integrated Logic and regulations: adjustable working time, option of selecting the kind of safety edge (N.C. contact/8K2 resistance) selectable, wireless memorizing of transmitters CLONE and REPLAY, operation in line with 2 or 4 step logic, exclusion of photocell active when opening, hold to run mode available.

Control panel with dip switches and potentiometers for one or two 230V/400+400W operators used on swing gates and industrial folding doors with management of sensitive edges and security entry verification option. It can control the gate's slowing down both when opening and closing. It can also control the connection with an EBP electric lock or with an ECB (with additional ME card). The radio receiver has rolling code technology incorporated into it. The terminal boards are coloured and can be removed to make it easier to perform the wiring.

Control panel with display for one or two 24V electromechanical operators used on 230V/500W swing gates (Power version). The dual-channel radio receiver is incorporated. It has a crush-proof system based on D-Track technology, controls the slowing down when opening and closing and has an electronic self-learning function. The main functions include automatic closing, fast closing, partial opening and hold-to-run operation.

Control panel with dip switches and potentiometers for one or two 230V300W operators used on swing gates, with management of sensitive edges and security entry verification option. It can also control the connection with an EBP electric lock or with an ECB (with additional ME card). The radio receiver has rolling code technology incorporated into it. The terminal boards are coloured and can be removed to make it easier to perform the wiring.

Блок управления для одного привода 230/400 В для откатных ворот