RIGEL 6 220-230V 50/60HZ

Product code D113833 00002

Universal control panel with display for one or two 230V - 650+650W operators Application: universal control panel for one or two operators Card power supply: 230 V single-phase Operators power supply: 230V single-phase 600+600W Main features: removable terminal blocks, programming and diagnostics with display, built-in four-channel receiver, electro lock, electronic torque limiter, electronic deceleration at opening and closing, a separate limit switch inputs for each motor, traffic light management, preheating hydraulic operators , weekly timer, possibility to delete a specific remote control, customization of the 4 radio channels, personalization of the duration of the delayed output, adjustable sensitivity to the obstacle. Main functions: automatic re-closing, separate motor working times, stays locked when closed, water hammer, 2/3/4 step logic, partial opening, fast closing, separate opening and closing Compatibility: RIGEL 5 - RIGEL 4 - RIGEL 3 - RIGEL N

Technologies

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

Maximum output 750 W
Maximum output 750 W
Board power supply 220-230 V
Board power supply 220-230 V
Max. n. transmitters 63
Max. n. transmitters 63
Programming Display
Programming Display
Power supply accessories 24V - 1A
Power supply accessories 24V - 1A
Light sensor 1
Light sensor 1
Safety edge 1
Safety edge 1
Resistive edge 1
Resistive edge 1
Tested photocell 1
Tested photocell 1
Tested safety edge 1
Tested safety edge 1
Stop 1
Stop 1
Start 1
Start 1
Traffic light control 1
Traffic light control 1
Open 1
Open 1
Close 1
Close 1
Pedestrian open 1
Pedestrian open 1
Open with timer 1
Open with timer 1
Pedestrian open with timer 1
Pedestrian open with timer 1
Blinker 1
Blinker 1
Configurable AUX 1 1
Configurable AUX 1 1
Configurable AUX 2 1
Configurable AUX 2 1
Configurable AUX 3 1
Configurable AUX 3 1
Solenoid Lock 1
Solenoid Lock 1
Alarm 0
Alarm 0
Courtesy Light 0
Courtesy Light 0
Gate open warning light 1
Gate open warning light 1
Zone light 1
Zone light 1
Electric release lock 1
Electric release lock 1
Electric magnetic lock 1
Electric magnetic lock 1
Maintenance 1
Maintenance 1
Flashing + Maintenance 1
Flashing + Maintenance 1
Tamper-proof 0
Tamper-proof 0
Gate status 1
Gate status 1
Bistable radio channel 1
Bistable radio channel 1
Time delay radio channel 1
Time delay radio channel 1
Photocell response 0
Photocell response 0
Obstacle detection (hydraulic only) 0
Obstacle detection (hydraulic only) 0
Encoder response 0
Encoder response 0
PDM contact activated 0
PDM contact activated 0
Bar closed 0
Bar closed 0
Bar open 0
Bar open 0
Stop contact activated 0
Stop contact activated 0
Pre-flashing 0
Pre-flashing 0
Bar lock 0
Bar lock 0
Open contact activated 0
Open contact activated 0
Close contact activated 0
Close contact activated 0
Start contact activated 0
Start contact activated 0
FRAC contact 0
FRAC contact 0
UPS contact 0
UPS contact 0
Contact according to radio channel 0
Contact according to radio channel 0
bollard raised 0
bollard raised 0
bollard lowered 0
bollard lowered 0
Black out 0
Black out 0
Gate open alarm 1
Gate open alarm 1
Buzzer 0
Buzzer 0
ECD pressure switch not functioning 0
ECD pressure switch not functioning 0
FCC sensor not functioning 0
FCC sensor not functioning 0
Alarm 0
Alarm 0
Stairs light 1
Stairs light 1
Courtesy light 1
Courtesy light 1
Interconnectivity Yes
Interconnectivity Yes

An unexpected error occurred: please reload the page or try again later.