DEIMOS AC A800 SL DN
Product code P925253 00002Operator 230 V for sliding gates up to 800 kg in weight. Leaf speed 9 m/min.
PLUS
Release lever with personalised key: the release lever simplifies motor release and the personalized key ensures its uniqueness, for better safety
Front screws: this arrangement of the casing screws offers ease and convenience during installation and maintenance, even when there is limited space.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partner
The new coding system for direct cloning of remote controls.
Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
| Control unit | SHYRA-F AC |
| Board power supply | 230 V |
| Supply voltage AC | 230 V |
| Power input | 300 W |
| Max. door/gate weight | 800 kg |
| Gate speed | 9 m/min |
| Type of limit switch | Electromechanical |
| Pinion module | 4 |
| Slowdown | Yes |
| Locking | Mechanical |
| Release | Lever-operated with personal key |
| Impact reaction | Electronic clutch |
| Frequency of use | Semi intensive |
| Protection rating | IP24 |
| Environmental conditions | -20 ÷ 55 °C |
| U-Link | no |
CP Cod. D221073plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
Max. load capacity 600 kg.plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
Max. load capacity 600 kg.
CVZ-S Cod. N999320steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
Max. load capacity 800 kg.steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
Max. load capacity 800 kg.
SFD Cod. N999151Base plate for DEIMOS series (supplied with operator).Base plate for DEIMOS series (supplied with operator).
CVZ Cod. D571053steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports.
Max. load capacity 1000 kg.steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports.
Max. load capacity 1000 kg.
