BERMA

Product code P915006 00001

Hydraulic operator for overhead garage doors of maximum surface area 9 m² and very intensive use.

Main features
  • Release system that can also be activated from outside by a steel cable in the SEB version.

  • The by-pass valves allow the exact setting of the torque separately and independently for opening and closing.

  • The hydraulic slowdown guarantees silent, smooth movements on even the biggest doors. Also, the adjustment screw makes it possible to adapt the slowdown intensity to each situation.

technical design
Control unit RIGEL 6
Nominal voltage 230 V
Power consumption 250 W
Slowdown no
Door surface area 9 m²
Locking Hydraulic
Release knob
Impact reaction Hydraulic clutch
Frequency of use very intensive
Protection rating IPX5
Environmental conditions -15 ÷ 60 °C
Interconnectivity no
ALCOR AC A
D114092 00002

Control unit with on-board receiver - no display - Standard terminal block

ALPHA SD
D113680 00002

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide and swing gates, roll-up gates and overhead doors Card power supply: 230 V single-phase Operator power supply: 230 V single-phase, max. 500 W Main features: removable terminal blocks, settings controlled by potentiometers, LED-based fault reporting and incorporated dual channel receiver Main functions: fast closing, pulse blocking, gate open indicator light Compatibility: MIZAR

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide...

CA1
N733038

Straight arm accessories for installation of one BERMA series operator on overhead door of 4 m max width

CA2
N733040

Straight arm accessories for installation of two BERMA series operators on overhead door

CA1C
N733039

Curved arm accessories for installation of one BERMA series operator on overhead door of 4 m max width (curved arms)

CA2C
N733041

Accessories for the installation of two BERMA series operators on overhead door (curved arms)

CAS1
N733042

Straight arm accessories for installation of one Berma operator L = 1000 mm Spain version

CAS1L
N733074

Straight arm accessories for installation of one Berma operator L = 1500 mm Spain version

CAS2
N733048

Straight arm accessories for installation of two Berma operators L = 1000 mm Spain version

CAS2L
N733075

Straight arm accessories for installation of two Berma operators L = 1500 mm Spain version

SEB
N733020

External key release for BERMA, FORB, IGEA LB and IGEA LB BT

RADIUS LED AC A R1
D114093 00002

Flashing light with incorporated antenna for motors with 230 V power supply.

RADIUS LED AC A R0
D114094 00002

Flashing light without incorporated antenna for motors with 230 V power supply.

COMPACTA A20-180
P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

An unexpected error occurred: please reload the page or try again later.