REEL EASY

Motors and kit for the automation of roller shutters


Motors and kit for the automation of roller shutters

The Reel range consists of a complete offer of wire tubular motors, with electromechanical limit switches.

Main features

The KIT version comes complete with all accessories for proper installation as well as operators already arranged in the special telescopic roller, able to adapt perfectly the size of the frame with a single action

New range complete with 1 to 5-channel PAD radio controls, features a modern design to suit any home context

New Shedir compact wire centralisation board: easily installed even in the boxes of roller shutters thanks to its small size, it can control up to two motors or motor units in single or centralised mode.

Products list
Motors and kit for the automation of roller shutters
REEL EASY RUA A10 230V W45

Wired operator for roller shutters. Max shutter weight 18 kg. max torque 10 Nm and power input 125 W. Shaft rotation speed 16 Rpm

Motors and kit for the automation of roller shutters
REEL EASY B10 230V W45

Wired operator for roller shutters. Max shutter weight 18 kg. max torque 10 Nm and power input 125 W. Shaft rotation speed 16 Rpm

Motors and kit for the automation of roller shutters
REEL EASY RUA A20 230V W45

Wired operator for roller shutters. Max shutter weight 35 kg. max torque 20 Nm and power input 180 W. Shaft rotation speed 16 Rpm

Motors and kit for the automation of roller shutters
REEL EASY B20 230V W45

Wired operator for roller shutters. Max shutter weight 35 kg. max torque 20 Nm and power input 180 W. Shaft rotation speed 16 Rpm

Motors and kit for the automation of roller shutters
REEL EASY RUA A30 230V W45

Wired operator for roller shutters. Max shutter weight 55 kg. max torque 30 Nm and power input 235 W. Shaft rotation speed 16 Rpm

Motors and kit for the automation of roller shutters
REEL EASY B30 230V W45

Wired operator for roller shutters. Max shutter weight 55 kg. max torque 30 Nm and power input 235 W. Shaft rotation speed 16 Rpm

Motors and kit for the automation of roller shutters
REEL EASY RUA A50 230V W45

Wired operator for roller shutters. Max shutter weight 88 kg. max torque 50 Nm and power input 285 W. Shaft rotation speed 12 Rpm

Motors and kit for the automation of roller shutters
REEL EASY B50 230V W45

Wired operator for roller shutters. Max shutter weight 88 kg. max torque 50 Nm and power input 285 W. Shaft rotation speed 12 Rpm

Motors and kit for the automation of roller shutters
REEL EASY RUA A50 230V WM45

Wired operator for roller shutters. Max shutter weight 88 kg. max torque 50 Nm and power input 285 W. Leaf speed 12 Rpm. Handle release.

Motors and kit for the automation of roller shutters
REEL EASY RUA A10 230V R45

Radio operator for roller shutters. Max shutter weight 18 kg. Max torque 10 Nm and power input 125 W. Shaft rotation speed 16 Rpm

Motors and kit for the automation of roller shutters
REEL EASY RUA A20 230V R45

Radio operator for roller shutters. Max shutter weight 35 kg. Max torque 20 Nm and power input 180 W. Shaft rotation speed 16 Rpm

Motors and kit for the automation of roller shutters
REEL EASY RUA A30 230V R45

Radio operator for roller shutters. Max shutter weight 55 kg. Max torque 30 Nm and power input 235 W. Shaft rotation speed 16 Rpm

Motors and kit for the automation of roller shutters
REEL EASY RUA A50 230V R45

Radio operator for roller shutters. Max shutter weight 88 kg. Max torque 50 Nm and power input 285 W. Shaft rotation speed 12 Rpm

Accessories

Recommended accessories.

SHEDIR B CBC 02 L01
Cod. P111515

Control unit for wired centralisation. For 2 operators (or 2 groups of operators) Application: wire centralisation board for 1 or 2 tubular motors Card power supply: 230 V single-phase Operator power supply: 230V 600W max. each operator Main characteristics: simplified and compact wire centralisation system Functions: control of 1 or 2 motors (or motor units) in single or simultaneous mode, general up/down, motor 1 or unit 1 up/down, motor 2 or unit 2 up/down

Control unit for wired centralisation. For 2 operators (or 2 groups of operators) Application: wire centralisation board for 1 or 2 tubular...

MIME PAD
Cod. P121028

4-channel wall-mounted radio control with rolling code

MIME TX
Cod. D113831

Two-channel miniaturized 433 Mhz transmitter

ELBA
Cod. D113716 00002

Control panel, max 230V, for roller shutters or roll-up doors Application: control panel for REEL type operator for roller shutters Card power supply: 230 V single-phase Operator power supply: 230V monophase Main features: Extremely compact size for installation in shutter case, programming with potentiometers and dip switches, built-in receiver Main functions: separate open/close, photocells input, possibility of centralised controls, anemometer and twilight sensor management Compatibility: CAPRI, CAPRI RIC, CAPRI TCA

Control panel, max 230V, for roller shutters or roll-up doors Application: control panel for REEL type operator for roller shutters Card...

SCS 1
Cod. P111376

Serial board for connection to zone and opposing leaves for control units with display While stocks last

CREP
Cod. P111183

Twilight sensor

ANEM
Cod. P111182

Anemometric ​​sensor with encoder for wind

AD 5027
Cod. N999323

Drive wheel and limit switch adapter for RUL60

AD5028
Cod. N999327

Octagonal adapter Ø70 mm zamak

AD5029
Cod. N999348

Round adapter Ø63x1.5 mm

AD5030
Cod. N999349

Deprat LP62 adapter

AD5031
Cod. N999350

Deprat LP89 adapter

AD5032
Cod. N999351

ZF 64 adapter

AD5034
Cod. N999395

ZF 54 adapter

AD5035
Cod. N999396

Ogive adapter Ø78 mm

AD5036
Cod. N999397

Octagonal adapter 60 PL

AD5038
Cod. N999547

Metallic ogive adapter Ø70 mm

SM504
Cod. P130015

Support with bearing for octagonal roller - screw type

SM505
Cod. P130014

Support for octagonal roller - cementing type

SM5013
Cod. N999324

Wall-mounted orientable support for operators with manual release

SM5014
Cod. N999325

Wall support for operators with square snap pin and split pin for direct coupling, suitable for all operators (from 10Nm to 50Nm).

SM5015
Cod. N999326

Wall-mounted two-position orientable support for operators with manual release

CAL 60/30
Cod. P130004

Octagonal cover for RUL 60.

CAL 60/100
Cod. P130002

Adjustable telescopic octagonal cover for RUL 60.

RUL 60/1,5
Cod. P130010

Octagonal shutter winding roller Ø60 mm x 1.5 m.

RUL 60/3
Cod. P130012

Octagonal shutter winding roller Ø60 mm x 3 m.

RUL 60/6
Cod. P130008

Octagonal shutter winding roller Ø60 mm x 6 m.

BLOCCANTI 40
Cod. P130001

Anti-break-in block for shutters with slats of height 40 mm.

BLOCCANTI 50
Cod. P130013

Anti-break-in block for shutters with slats of height 50 mm.

MM8
Cod. N999328

Manual operation eye-ring

MM9
Cod. N999329

45 ° universal joint for manual operation

MM10
Cod. N999330

90 ° universal joint for manual operation

MM11
Cod. N999331

1.5 m articulated boom with hook for manual operation

MM12
Cod. N999332

1.5 m rigid boom with hook for manual operation

ER 1
Cod. P130025

External receiver for REEL RUA series operators. Compatible with PAD series transmitters

Timer
Cod. P130024

Weekly programmer for REEL RADIO or external ER-1 receiver

Pad Rcd 01 F
Cod. D111911

Wall-mounted remote control 1 channel for radio tubes

Pad Rcd 01 R
Cod. D111909

1-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver

Pad Rcd 05 R
Cod. D111910

5-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver

MIME AC
Cod. D113824

433 MHz two-channel indoor receiver 2 independent outputs 230 Vac power supply 30-position memory Operating mode: monostable, bistable, timed, motor control

433 MHz two-channel indoor receiver 2 independent outputs 230 Vac power supply 30-position memory Operating mode: monostable, bistable,...

MITTO B RCB04 R1 CLEAR ICE
Cod. D111947

Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Colour clear ice white. Buttons panel can be customised with own design/logo.

Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Colour clear ice white. Buttons panel can be customised...

MITTO B RCB04 R1
Cod. D111906

Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

MITTO B RCB02 R1
Cod. D111904

Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

ELBA BU
Cod. D113717 00002

Control panel, max 230V, for roller shutters or roll-up doors Application: control panel for one roll-up door operator Card power supply: 230 V single-phase Operator power supply: 230V monophase Main features: Extremely compact size for installation in shutter case, programming with potentiometers and dip switches, built-in receiver, control button on case Main functions: separate open/close, photocells input, possibility of centralised controls, anemometer and twilight sensor management Compatibility: CAPRI, CAPRI RIC, CAPRI TCA

Control panel, max 230V, for roller shutters or roll-up doors Application: control panel for one roll-up door operator Card power supply:...

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.