LEO B CBB L01

Product code D113767 00002

U-Link control board for Pegaso B Cja single-phase operators Application: control panel for one operator PEGASO B CJA monophase series Card power supply: 230 V single-phase Operator power supply: 230V monophase

Maximum output 750 W
Maximum output 750 W
Board power supply 220-230 V
Board power supply 220-230 V
Programming Display
Programming Display
Power supply accessories 24V - 0,36A
Power supply accessories 24V - 0,36A
Light sensor Yes
Light sensor Yes
Safety edge Yes
Safety edge Yes
Resistive edge Yes
Resistive edge Yes
Tested photocell Yes
Tested photocell Yes
Tested safety edge Yes
Tested safety edge Yes
Stop Yes
Stop Yes
Start Yes
Start Yes
Traffic light control Yes
Traffic light control Yes
Open Yes
Open Yes
Close Yes
Close Yes
Pedestrian open Yes
Pedestrian open Yes
Open with timer Yes
Open with timer Yes
Pedestrian open with timer Yes
Pedestrian open with timer Yes
Blinker no
Blinker no
Configurable AUX 1 no
Configurable AUX 1 no
Configurable AUX 2 no
Configurable AUX 2 no
Configurable AUX 3 24V - 0,125A
Configurable AUX 3 24V - 0,125A
Solenoid Lock no
Solenoid Lock no
Alarm no
Alarm no
Courtesy Light no
Courtesy Light no
Gate open warning light no
Gate open warning light no
Courtesy light no
Courtesy light no
Gate open alarm no
Gate open alarm no
Electric release lock no
Electric release lock no
Flashing + Maintenance no
Flashing + Maintenance no
Maintenance no
Maintenance no
Electric magnetic lock no
Electric magnetic lock no
Bistable radio channel no
Bistable radio channel no
Zone light no
Zone light no
Gate status no
Gate status no
Tamper-proof no
Tamper-proof no
Time delay radio channel no
Time delay radio channel no
Stairs light no
Stairs light no
Obstacle detection (hydraulic only) no
Obstacle detection (hydraulic only) no
Bar open no
Bar open no
Stop contact activated no
Stop contact activated no
Pre-flashing no
Pre-flashing no
Bar lock no
Bar lock no
Open contact activated no
Open contact activated no
Close contact activated no
Close contact activated no
PDM contact activated no
PDM contact activated no
Start contact activated no
Start contact activated no
FRAC contact no
FRAC contact no
Encoder response no
Encoder response no
Photocell response no
Photocell response no
Contact according to radio channel no
Contact according to radio channel no
UPS contact no
UPS contact no
bollard lowered no
bollard lowered no
Black out no
Black out no
ECD pressure switch not functioning no
ECD pressure switch not functioning no
Alarm no
Alarm no
Bar closed no
Bar closed no
FCC sensor not functioning no
FCC sensor not functioning no
Buzzer no
Buzzer no
bollard raised no
bollard raised no
Interconnectivity no
Interconnectivity no

An unexpected error occurred: please reload the page or try again later.