Motors and kit for the automation of roller shutters

SHEDIR B CBC 02 L01
Cod. P111515

Control unit for wired centralisation. For 2 operators (or 2 groups of operators) Application: wire centralisation board for 1 or 2 tubular motors Card power supply: 230 V single-phase Operator power supply: 230V 600W max. each operator Main characteristics: simplified and compact wire centralisation system Functions: control of 1 or 2 motors (or motor units) in single or simultaneous mode, general up/down, motor 1 or unit 1 up/down, motor 2 or unit 2 up/down

Control unit for wired centralisation. For 2 operators (or 2 groups of operators) Application: wire centralisation board for 1 or 2 tubular...

MIME PAD
Cod. P121028

4-channel wall-mounted radio control with rolling code

MIME TX
Cod. D113831

Two-channel miniaturized 433 Mhz transmitter

ELBA
Cod. D113716 00002

Control panel, max 230V, for roller shutters or roll-up doors Application: control panel for REEL type operator for roller shutters Card power supply: 230 V single-phase Operator power supply: 230V monophase Main features: Extremely compact size for installation in shutter case, programming with potentiometers and dip switches, built-in receiver Main functions: separate open/close, photocells input, possibility of centralised controls, anemometer and twilight sensor management Compatibility: CAPRI, CAPRI RIC, CAPRI TCA

Control panel, max 230V, for roller shutters or roll-up doors Application: control panel for REEL type operator for roller shutters Card...

SCS 1
Cod. P111376

Serial board for connection to zone and opposing leaves for control units with display While stocks last

CREP
Cod. P111183

Twilight sensor

ANEM
Cod. P111182

Anemometric ​​sensor with encoder for wind

SM504
Cod. P130015

Support with bearing for octagonal roller - screw type

SM505
Cod. P130014

Support for octagonal roller - cementing type

SM5014
Cod. N999325

Wall support for operators with square snap pin and split pin for direct coupling, suitable for all operators (from 10Nm to 50Nm).

CAL 60/30
Cod. P130004

Octagonal cover for RUL 60.

CAL 60/100
Cod. P130002

Adjustable telescopic octagonal cover for RUL 60.

RUL 60/3
Cod. P130012

Octagonal shutter winding roller Ø60 mm x 3 m.

RUL 60/6
Cod. P130008

Octagonal shutter winding roller Ø60 mm x 6 m.

BLOCCANTI 40
Cod. P130001

Anti-break-in block for shutters with slats of height 40 mm.

BLOCCANTI 50
Cod. P130013

Anti-break-in block for shutters with slats of height 50 mm.

Timer
Cod. P130024

Weekly programmer for REEL RADIO or external ER-1 receiver

MIME AC
Cod. D113824

433 MHz two-channel indoor receiver 2 independent outputs 230 Vac power supply 30-position memory Operating mode: monostable, bistable, timed, motor control

433 MHz two-channel indoor receiver 2 independent outputs 230 Vac power supply 30-position memory Operating mode: monostable, bistable,...

MITTO B RCB04 R1 CLEAR ICE
Cod. D111947

Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Colour clear ice white. Buttons panel can be customised with own design/logo.

Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Colour clear ice white. Buttons panel can be customised...

MITTO B RCB04 R1
Cod. D111906

Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

MITTO B RCB02 R1
Cod. D111904

Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

ELBA BU
Cod. D113717 00002

Control panel, max 230V, for roller shutters or roll-up doors Application: control panel for one roll-up door operator Card power supply: 230 V single-phase Operator power supply: 230V monophase Main features: Extremely compact size for installation in shutter case, programming with potentiometers and dip switches, built-in receiver, control button on case Main functions: separate open/close, photocells input, possibility of centralised controls, anemometer and twilight sensor management Compatibility: CAPRI, CAPRI RIC, CAPRI TCA

Control panel, max 230V, for roller shutters or roll-up doors Application: control panel for one roll-up door operator Card power supply:...