LUX L
Product code P935012 00001Hydraulic operator 230 V for hinged leaves up to 4 m and 500 kg in weight. Useful travel 270 mm, manoeuvre time 33 s and maximum opening angle 123 °. Locking system: Solenoid Lock
Main features
All-aluminium structure with high-resistance anodising treatment.
The by-pass valves, in the 230V versions, allow the exact setting of the torque separately and independently for opening and closing.
The slowdown during closing (R versions) guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partnerThe new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.

Control unit | RIGEL 6 |
Motor voltage | 230 V |
Power consumption | 250 W |
Max. width of door/gate wing | 4 m |
Max. weight of door/gate wing | 500 kg |
Useful rod stroke | 270 mm |
Maximum angle | 123 ° |
Cycle time | 33 s |
Type of limit switch | work time |
Slowdown | no |
Locking | Solenoid Lock |
Release | Reversible |
Impact reaction | Hydraulic clutch |
Frequency of use | very intensive |
Protection rating | IP57 |
Environmental conditions | -10 ÷ °C |
Interconnectivity | no |

ARB LUX
Cod. N733426
Adjustable front and rear bracket for LUX operator

ARB LUX G
Cod. N733474
Adjustable front and rear bracket for LUX G operator

CLS
Cod. D610180
Triangular release key l=52 mm

COMPACTA A20-180
Cod. P111782
Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

RADIUS LED AC A R0
Cod. D114094 00002
Flashing light without incorporated antenna for motors with 230 V power supply.

RADIUS LED AC A R1
Cod. D114093 00002
Flashing light with incorporated antenna for motors with 230 V power supply.
