Irreversible electro-mechanical operator 24 V for swing gates up to 400 kg in weight and up to 2.5 m in length with covered worm screw. Integrated mechanical stops.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.Report a suspicious product or e-partner
A precise, safe and reliable technology.
Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening.
Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles.
The efficiency of the technology is a guarantee of the product's reliability.
The thrust required to operate safely.
A smart torque management system based on the microprocessor technology of BFT control units.
Acquiring data from several indicators, it updates the level of thrust required to perform the operation.
D-Track also facilitates the installer in providing for the certifications required by law.
Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.
BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor.
A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles.
The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.
For safe transmission.
BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation.
When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once.
The algorithm generated then prevents the reproduction of the code.
The new coding system for direct cloning of remote controls.
Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For fast and safe programming.
EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa.
Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated.
Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc.
With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
|Board power supply||230 V|
|Motor voltage||24 V|
|Power input||40 W|
|Max. width of door/gate wing||2.5 m|
|Max. weight of door/gate wing||400 kg|
|Useful rod stroke||250 mm|
|Maximum angle||118 °|
|Cycle time||13 s|
|Type of limit switch||Magnetic|
|Frequency of use||intensive|
|Environmental conditions||-20 ÷ 55 °C|
THALIA P Cod. D113747 00002Board power supply: 230V single-phase.
Operators power supply: 24Vdc 240W max each operator.
Main features: removable terminal blocks with...
Board power supply: 230V single-phase.
Operators power supply: 24Vdc 240W max each operator.
Main features: removable terminal blocks with new standard colour-coding, simplified scenario-based programming with display and incorporated dual channel receiver, D-Track anti-crushing system , slowdown during opening and closing and electronic self-learning.
Main features: automatic closing, rapid closing, partial opening, operation with deadman feature, direct connection powered solenoid lock and electromagnet, direct connection edge 8K2.
Application: display panel for 1 or 2 24V operators.
Compatibility: LIBRA C MA, LIBRA, LIBRA R, LIBRA MA R.
ARB KUSTOS FRONT Cod. N733646Front adjustable fixing brackets for Kustos BT A.Front adjustable fixing brackets for Kustos BT A.
ARB KUSTOS REAR Cod. N733647Pair of adjustable rear fixing brackets for Kustos BT A.Pair of adjustable rear fixing brackets for Kustos BT A.
PLE Cod. D730178Anchor plate for welding the mountings to masonry pillars for LUX, ORO, PHOBOS operators.Anchor plate for welding the mountings to masonry pillars for LUX, ORO, PHOBOS operators.
SFR A Cod. N733722Adjustable bracket for PHOBOS BT A, PHOBOS AC A, KUSTOS BT A.Adjustable bracket for PHOBOS BT A, PHOBOS AC A, KUSTOS BT A.
SFR L A Cod. N733723Adjustable bracket for PHOBOS BT A, PHOBOS AC A, KUSTOS BT A.Adjustable bracket for PHOBOS BT A, PHOBOS AC A, KUSTOS BT A.
CABLE N BT Cod. N999404Control unit connecting cable for PHOBOS BT A, KUSTOS BT A. Coil of 100 m, 3x1,5.Control unit connecting cable for PHOBOS BT A, KUSTOS BT A. Coil of 100 m, 3x1,5.
BBT BAT Cod. P125020Set of backup batteries for THALIA and THALIA P.Set of backup batteries for THALIA and THALIA P.