ELI 250 N BT

Product code P930125 00001

In-ground irreversible electromechanical operator 24 V for swing gates weighing up to 400 kg and 3.5 m long.


Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner

The thrust required to operate safely. A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations. BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor. A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles. The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

A precise, safe and reliable technology Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening. Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles. The efficiency of the technology is a guarantee of the product's reliability.

technical design
Control unit THALIA
Board power supply 230 V
Motor voltage 24 V
Power consumption 175 W
Max. width of door/gate wing 3.5 m
Max. weight of door/gate wing 400 kg
Maximum angle 120 °
Cycle time 15 s
Type of limit switch Magnetic
Slowdown Yes
Locking Mechanical
Release Lever or lever with personalised key
Impact reaction D-Track
Frequency of use intensive
Protection rating IP67
Environmental conditions -20 ÷ 50 °C
Interconnectivity Yes
Cod. D113747 00002

Card power supply: 230 V single-phase Operators power supply: 24Vdc 240W max each operator Main features: removable terminal blocks with new standard colour-coding, simplified scenario-based programming with display and incorporated dual channel receiver, D-Track anti-crushing system , slowdown during opening and closing and electronic self-learning Main features: automatic closing, rapid closing, partial opening, operation with deadman feature, direct connection powered solenoid lock and electromagnet, direct connection edge 8K2. Application: display panel for 1 or 2 24V operators Compatibility: LIBRA C MA, LIBRA, LIBRA R, LIBRA MA R

Card power supply: 230 V single-phase Operators power supply: 24Vdc 240W max each operator Main features: removable terminal blocks with new...

BTCF 120 E
Cod. N733397

Foundation box with levers for ELI AC A, ELI BT A. Release not supplied

Cod. N733398

Stainless steel foundation box with levers for ELI AC A, ELI BT A. Release not provided

Cod. N733392

Release for ELI AC A, ELI BT A and SUB BT with lever key.

Cod. N733502

Release for ELI AC A, ELI BT A and SUB BT with personalized key.

Cod. P125020

Set of backup batteries for THALIA and THALIA P

Cod. D111761

Control board for 24Vac solenoid lock for 24V automation systems

Bft Easy Set
Installing automation for a swing gate has never been easier!

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.