PHOBOS AC A25

Product code P935098 00002

Irreversible electromechanical operator 230 V for swing gates weighing up to 400 kg and 2.5 m long.

Main features
  • Magnetic pin: an exclusive feature of Bft operators enabling quicker installation steps, making them easier and always ensuring correct rear locking of the operator

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies

For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

technical design
Control unit RIGEL 6, ALENA SW2
Board power supply 230 V
Motor voltage 230 V
Power consumption 210 W
Max. width of door/gate wing 2.5 m
Max. weight of door/gate wing 400 kg
Useful rod stroke 350 mm
Maximum angle 120 °
Cycle time 14 s
Type of limit switch work time
Slowdown Yes
Locking Mechanical
Release Personal key
Impact reaction Electronic clutch
Frequency of use Semi intensive
Protection rating IPX4
Environmental conditions -20 ÷ 55 °C
U-Link no
Recommended
ALENA ACL2
Compatible
RIGEL 5
ALENA SW2
Cod. D113811 00004

Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operators power supply: 230V single-phase 400W max each operator Main features: programming of trimmer and dip-switch, removable terminal block with standard colouring, integrated radio receiver, remote controlled pedestrian opening. Soft opening and closing (only with electromechanical motor), management of resistive safety edges 8K2/contact, management of verified safety devices, management of electronic locks, electronic control of motor torque (only with electromechanical motor), pressure surge when opening. Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics Compatibility: ALTAIR and ARIES

Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operators power supply: 230V...

ARB PHOBOS N
Cod. N733427

Front and rear adjustable bracket for PHOBOS operator

ARB PHOBOS N L
Cod. N733428

Front and rear adjustable bracket for PHOBOS operator

ARB PHOBOS 25
Cod. N733427 00001

Adjustable front mounting bracket, Phobos A 25

ARB PHOBOS 40
Cod. N733428 00001

Adjustable front mounting bracket, Phobos A 40

SFR B
Cod. N735002

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7)

SFR-L B
Cod. N735003

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7)

SFR B - COMPLETA
Cod. N735002 00001

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

SFR-L B - COMPLETA
Cod. N735003 00001

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

PLE
Cod. D730178

Anchor plate for welding the mountings to masonry pillars for LUX, ORO, PHOBOS operators

RADIUS LED AC A R0
Cod. D114094 00002

Flashing light without incorporated antenna for motors with power supply 230 V.

RADIUS LED AC A R1
Cod. D114093 00002

Flashing light with incorporated antenna for motors with power supply 230 V.

COMPACTA A20-180
Cod. P111782

Pair of photocells adjustable 180 ° horizontally. Range 20m. Power supply 12 – 33Vac / 15 – 35Vdc

Swinging gates
Electromechanical automation systems for swinging gates
Download
Phobos AC A
How to Choose the Right Swing Gate Operator
Show
Bft Easy Set
Installing automation for a swing gate has never been easier!
Show

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.