P4.5 UL/CSA

Product code P935061 00003

Reversible hydraulic operator for swing gates up to 4.5 m. 500 kg in weight. Cycle time 28+slowdown s. Useful travel 390 mm. max angle 123 °.

Main features
  • The rear articulated brackets and jointed rod make installation simple and reliable in all situations.

  • The brass release knob, protected with a personal key, facilitates the manual opening of the gate in the event of a power cut.

  • The closing slowdown guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
technical design
Control unit RIGEL 6
Board power supply V
Motor voltage 120 V
Power consumption 250 W
Max. width of door/gate wing 4.5 m
Max. weight of door/gate wing 500 kg
Useful rod stroke 390 mm
Maximum angle 123 °
Cycle time 28+slowdown s
Type of limit switch work time
Slowdown During closing
Locking Solenoid Lock
Release Reversible
Impact reaction Hydraulic clutch
Frequency of use very intensive
Protection rating IP55
Environmental conditions -10 ÷ 60 °C
U-Link no
Recommended
RIGEL 5
ALCOR N
Compatible
ALPHA SD
ALPHA SD
Cod. D113680 00002

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide and swing gates, roll-up gates and overhead doors Card power supply: 230 V single-phase Operator power supply: 230V single phase 500W max Main features: removable terminal blocks, settings controlled by potentiometers, LED-based fault reporting and incorporated dual channel receiver Main functions: fast closing, pulse blocking, gate open indicator light Compatibility: MIZAR

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide...

NAT
Cod. N999131

Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath

CLS
Cod. D610180

Triangular release key l=52 mm

ME
Cod. D111013

Control board for 12Vac solenoid lock for 230V automation systems

COMPACTA A20-180
Cod. P111782

Pair of photocells adjustable 180 ° horizontally. Range 20m. Power supply 12 – 33Vac / 15 – 35Vdc

RADIUS LED AC A R0
Cod. D114094 00002

Flashing light without incorporated antenna for motors with power supply 230 V.

RADIUS LED AC A R1
Cod. D114093 00002

Flashing light with incorporated antenna for motors with power supply 230 V.

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.