DEIMOS AC KIT A600 FRA
Product code R925281 00002Complete kit 230 V for sliding gates weighing up to 600 kg. Leaf speed 9 m/min.
PLUS
Release lever with personalised key: the release lever simplifies motor release and the personalized key ensures its uniqueness, for better safety
Front screws: this arrangement of the casing screws offers ease and convenience during installation and maintenance, even when there is limited space.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partner
| Control unit | SHYRA AC |
| Board power supply | 230 V |
| Supply voltage AC | 230 V |
| Power input | 400 W |
| Max. door/gate weight | 600 kg |
| Gate speed | 9 m/min |
| Type of limit switch | Electromechanical |
| Pinion module | 4 |
| Slowdown | no |
| Locking | Mechanical |
| Release | Lever-operated with personal key |
| Impact reaction | Mechanical clutch |
| Frequency of use | Semi intensive |
| Protection rating | IP24 |
| Environmental conditions | -20 ÷ 55 °C |
| U-Link | no |
MITTO B RCB04 R1
Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.
RADIUS B LTA 230 R1
Flashing light with incorporated antenna for motors with power supply 230 V.
DESME A15
Pair of self-aligning photocells. Range 30 m. Power supply 24 V ac/dc.
CP Cod. D221073plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
Max. load capacity 600 kg.plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
Max. load capacity 600 kg.
CVZ-S Cod. N999320steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
Max. load capacity 800 kg.steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
Max. load capacity 800 kg.
SFD Cod. N999151Base plate for DEIMOS series (supplied with operator).Base plate for DEIMOS series (supplied with operator).
CVZ Cod. D571053steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports.
Max. load capacity 1000 kg.steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports.
Max. load capacity 1000 kg.
