IGEA LB
Product code P935077 00001Electromechanical operator for industrial folding doors (max. two panels) with panel length 2 m. door weight 250 kg and use Semi intensive.
Main features
Control unit with programming display, automatic setting menu, simplified programming and virtual encoder in 24V version.
Built-in, adjustable, single-cable electromechanical limit switch system.
Removable steel cable release system.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partner
Control unit | RIGEL 6 |
Nominal voltage | 230 V |
Power consumption | 300 W |
Max. door/gate weight | 250 kg |
Panel length | 2 m |
Type of limit switch | Electromechanical |
Slowdown | Yes |
Locking | Mechanical |
Release | External accessory with personal key |
Impact reaction | Electronic clutch |
Frequency of use | Semi intensive |
Protection rating | IP4X |
Environmental conditions | -15 ÷ 60 °C |
Interconnectivity | no |

RIGEL 6 220-230V 50/60HZ

ALENA SW2
Cod. D113811 00004
Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operators power supply: 230V single-phase 400W max each operator Main features: programming of trimmer and dip-switch, removable terminal block with standard colouring, integrated radio receiver, remote controlled pedestrian opening. Soft opening and closing (only with electromechanical motor), management of resistive safety edges 8K2/contact, management of verified safety devices, management of electronic locks, electronic control of motor torque (only with electromechanical motor), pressure surge when opening. Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics Compatibility: ALTAIR and ARIES
Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operators power supply: 230V...

COMPACTA A20-180
Cod. P111782
Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

THALIA
Cod. D113745 00002
Application: control panel with display for one or two 24V electromechanical operators for swing gates Card power supply: 230 V single-phase Operators power supply: 24Vdc 180W max each operator Main features: new standard colour removable terminal blocks, simplified scenario-based programming with display and integrated dual-channel receiver, D-Track anti-crushing system, slowdown during opening and closing and electronic self-learning. Main functions: automatic re-closing, fast closing, partial opening, deadman feature Compatibility: LIBRA C MA, LIBRA, LIBRA R, LIBRA MA R
Application: control panel with display for one or two 24V electromechanical operators for swing gates Card power supply: 230 V single-phase...

SEB
Cod. N733020
External key release for BERMA, FORB, IGEA LB and IGEA LB BT

BOX
Cod. N574039
Wall cabinet for release with steel cable and electric control; cable not included

RCA
Cod. N733421
Lever release with steel cable, length 3.5 m. Compatible with BOX.

RCAL
Cod. N733422
Lever release with steel cable, length 7 m. Compatible with BOX.