To access your reserved area you must fill out the registration form by following a simple wizard.
After clicking the button below, please enter your details and send the request.
ATTENTION: This operation applies only for the country from where you are registering. To access the Reserved Area from a different country you must do a new registration.
Complete range of low voltage hydraulic pistons for very intensive use, suitable for any type of residential, industrial or multi-residence application.
Compact and sturdy, capable of automating swing gate leaves up to 5 metres wide and weighing up to 800 kg.
Available in both reversible and irreversible versions, with maximum precision in torque control guaranteed by by-pass valves.
All-aluminium structure with high-resistance anodising treatment.
The by-pass valves, in the 230V versions, allow the exact setting of the torque separately and independently for opening and closing.
The slowdown during closing (R versions) guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.
The new coding system for direct cloning of remote controls.
Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For fast and safe programming.
EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa.
Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated.
Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc.
With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
Hydraulic operator 230 V for hinged leaves up to 2 m and 300 kg in weight. Useful travel 270 mm, manoeuvre time 17 s and maximum opening angle 123 °. Locking system: Solenoid Lock.
OpenHydraulic operator 230 V for hinged leaves up to 2 m and 300 kg in weight. Useful travel 270 mm, manoeuvre time 17 s and maximum opening angle 123 °. Locking system: Solenoid Lock.
OpenHydraulic operator 230 V for hinged leaves up to 2 m and 300 kg in weight. Useful travel 270 mm, manoeuvre time 17 s and maximum opening angle 123 °. Locking system: Solenoid Lock.
OpenHydraulic operator 230 V for hinged leaves up to 2.2 m and 300 kg in weight. Useful travel 270 mm, manoeuvre time 17 s and maximum opening angle 123 °. Locking system: Solenoid Lock.
OpenHydraulic operator 230 V for hinged leaves up to 2.2 m and 300 kg in weight. Useful travel 270 mm, manoeuvre time 17 s and maximum opening angle 123 °. Locking system: Solenoid Lock.
OpenHydraulic operator 230 V for hinged leaves up to 2 m and 300 kg in weight. Useful travel 270 mm, manoeuvre time 17 s and maximum opening angle 123 °. Locking system: Hydraulic closing.
OpenHydraulic operator 230 V for hinged leaves up to 2 m and 300 kg in weight. Useful travel 270 mm, manoeuvre time 17 s and maximum opening angle 123 °. Locking system: Solenoid Lock.
OpenHydraulic operator 230 V for hinged leaves up to 2 m and 300 kg in weight. Useful travel 270 mm, manoeuvre time 17 s and maximum opening angle 123 °. Locking system: Open/close hydraulics.
OpenHydraulic operator 230 V for hinged leaves up to 2 m and 300 kg in weight. Useful travel 270 mm, manoeuvre time 17 s and maximum opening angle 123 °. Locking system: Open/close hydraulics.
OpenHydraulic operator 230 V for hinged leaves up to 2 m and 300 kg in weight. Useful travel 270 mm, manoeuvre time 17 s and maximum opening angle 123 °. Locking system: Solenoid Lock.
Open230 V hydraulic operator for swing gate up to 2 m long and weighing 300 kg. Opening 250 mm, movement time 16+slowdown s and maximum opening angle 101 °. Locking system: Open/close hydraulics.
OpenHydraulic operator 230 V for hinged leaves up to 2 m and 300 kg in weight. Useful travel 280 mm, manoeuvre time 17 s and maximum opening angle 117 °. Locking system: Open/close hydraulics.
OpenHydraulic operator 230 V for hinged leaves up to 2.3 m and 300 kg in weight. Useful travel 270 mm, manoeuvre time 23 s and maximum opening angle 123 °. Locking system: Hydraulic closing.
OpenHydraulic operator 230 V for hinged leaves up to 3.5 m and 300 kg in weight. Useful travel 270 mm, manoeuvre time 17 s and maximum opening angle 123 °. Locking system: Solenoid Lock.
OpenHydraulic operator 230 V for hinged leaves up to 4 m and 500 kg in weight. Useful travel 270 mm, manoeuvre time 33 s and maximum opening angle 123 °. Locking system: Solenoid Lock.
OpenHydraulic operator 230 V for hinged leaves up to 4 m and 500 kg in weight. Useful travel 270 mm, manoeuvre time 33 s and maximum opening angle 123 °. Locking system: Solenoid Lock.
OpenHydraulic operator 230 V for hinged leaves up to 5 m and 800 kg in weight. Useful travel 390 mm, manoeuvre time 48 s and maximum opening angle 130 °. Locking system: Solenoid Lock.
OpenKit for swing gates up to 2.3 m, 300 kg in weight. Hydraulic operators with useful travel 270 mm, max angle 123 °, locking Hydraulic closing and release Triangle key. Cycle time 23 s. Power input 250 W.
OpenRecommended accessories.
ALPHA SD Cod. D113680 00002Universal control panel with potentiometers for one 230V/500W single-phase operator.
Application: control panel for one operator for slide...
Universal control panel with potentiometers for one 230V/500W single-phase operator.
Application: control panel for one operator for slide and swing gates, roll-up gates and overhead doors.
Board power supply: 230V single-phase.
Operator power supply: 230V single phase 500W max.
Main features: removable terminal blocks, settings controlled by potentiometers, LED-based fault reporting and incorporated dual channel receiver.
Main functions: fast closing, pulse blocking, gate open indicator light.
Compatibility: MIZAR.
ARB LUX Cod. N733426Adjustable front and rear bracket for LUX operator.Adjustable front and rear bracket for LUX operator.
ARB LUX G Cod. N733474Adjustable front and rear bracket for LUX G operator.Adjustable front and rear bracket for LUX G operator.
PLE Cod. D730178Anchor plate for welding the mountings to masonry pillars for LUX, ORO, PHOBOS operators.Anchor plate for welding the mountings to masonry pillars for LUX, ORO, PHOBOS operators.
NAT Cod. N999131Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath.Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath.
ME Cod. D111013Control board for 12Vac solenoid lock for 230V automation systems.Control board for 12Vac solenoid lock for 230V automation systems.
CLS Cod. D610180Triangular release key l=52 mm.Triangular release key l=52 mm.
ALCOR AC A Cod. D114092 00002Dip switch and potentiometer control panel for one or two 230 V/300 W operators for swing gates.Dip switch and potentiometer control panel for one or two 230 V/300 W operators for swing gates.
