ESPAS 30-A ULTRA


The ESPAS 30-A ULTRA station is a device for controlling an entry or exit transit point of a parking area. The unit works in a wired network

as a component between the other elements of the system. This device allows to manage subscribers and operator card. The display and voice messages guide improve the user experience.

Basic components

Dedicated electronic board with integrated display and onboard joystick for quick programming and consultation of alarms.
Proximity card reader for operators and subscriptions.
20 characters x 2 rows backlit LCD display
Multilanguage audio and display messages.
Internal temperature regulated by forced ventilation and heating element.
Programmable and highly sensitive two-channels loop detector.
Automatic barrier management.
Assistance call button.
RS485 interface.
Guaranteed operation also during server offline periods.
Working mode configurable by software, control board or operator cards.
Alarms management with notification to the parking server.

Optional components

Proximity MIFARE card reader for operators and subscriptions.
Bus or IP intercom.
RS485 / LAN converter.
Single lane, two ways gate management.
Cage barriers management.
Double-height terminals availability.
Customizable cabinet colour.

Recommendation

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
CodeTitleIP intercomRFID card readerDouble height low & high vehicleBus intercom
PA5D040R10000 ESPAS 30-A ULTRA RF
PA5D040R11000 ESPAS 30-A ULTRA RF CIT-BUS new
PA5D040R12000 ESPAS 30-A ULTRA RF CIT-IP
PA8D040R10000 ESPAS 30-AH ULTRA RF new
PA8D040R11000 ESPAS 30-AH ULTRA RF CIT-BUS new
PA8D040R12000 ESPAS 30-AH ULTRA RF CIT-IP new
Supply voltage230 VAC ±10%, 50Hz-60Hz
Max power consumption200 W
Idle power consumption70 W
Operating temperature-20 ÷ 50 °C
Sizes1265 x 341 x 315 inch
Gross weight60 kg
Standard communication interfaceRS485
Standard colorRAL7015
MaterialCabinet in 2.0 mm thick DD11 (UNI EN 10111) steel sheet; front panel in anti-wear and anti-scratch polycarbonate.
technical design ESPAS 30-A ULTRA
KIT STATIONS ANCHOR BASE
21261

Column anchor base for 20/30 entry/exit terminals

MAGNETIC LOOP 6MT
D110945

High sensivity pre-cabled magnetic loop (10m tail x 6m loop)

MAGNETIC LOOP 8MT
D141784

High sensivity pre-cabled magnetic loop (10m tail x 8m loop)

HEATER UNIT
D121711

Heater unit 60W for internal station/POF installation on DIN bar

TRAFFIC LIGHT 3 LED 100MM
385256

Traffic light with three LED lights (red - red - green) with high brightness for transit regulation. Complete with LED lamps. Diam. 100mm

TRAFFIC LIGHT LED 100MM
130198

Traffic light, 2 LEDs light, diam. 100mm

TRUCK HEIGHT PEDESTAL 800MM
D413445

800mm height pedestal, with door, for entry/exit column

BUS HEIGHT PEDESTAL 600MM
D413530

600mm height pedestal, with door, for entry/exit column

LOOP DETECTOR LITE
D113999

2 channel loop detector, 24VDC, up to 4 frequencies per channel for close loop installations, adjustable sensitivity, boost function for sensitivity increase

2 channel loop detector, 24VDC, up to 4 frequencies per channel for close loop installations, adjustable sensitivity, boost function for...

LOOP DETECTOR PRO
D113948

2 channel loop detector, 24VDC/AC, up to 4 frequencies per channel for close loop installations, adjustable sensitivity, boost function for sensitivity increase. Direction detection.

2 channel loop detector, 24VDC/AC, up to 4 frequencies per channel for close loop installations, adjustable sensitivity, boost function for...

KIT DENEB TO DENEB
P800138

Additional board used to communicate between two stations in "Two Ways" and "Double Height" configuration. For 30 system only.

KIT INTERLOCK FOR PARKING
P800137

Kit for manage interlock function (station between two barriers), useful to prevent queues on the gate or for particularly security requirements. It's usable when a third loop management is required (e.g. motorbike). Includes a loop detector for the second barrier safety loop and a kit of terminals in order to connect the commands of the second barrier.

Kit for manage interlock function (station between two barriers), useful to prevent queues on the gate or for particularly security...

PRESENCE AND SAFETY DETECTOR - LASER LOOPS
394080

Presence and Safety laser detector. Its used as an alternative of magnetc loops. Includes one input and two relay outputs. Maximum detection range: 9.9m x 9.9m.10-35VDC power supply.

Presence and Safety laser detector. Its used as an alternative of magnetc loops. Includes one input and two relay outputs. Maximum detection...

LASER SAFATEY DETECTOR
394073

Safety laser detector. Its used in combination with magnetc loops in order to add an additional safety device (eg: for pedestrian). Includes two relay outputs. Maximum detection range: 5m x 5m.10-35VDC power supply.

Safety laser detector. Its used in combination with magnetc loops in order to add an additional safety device (eg: for pedestrian). Includes...

LASER DETECTOR REMOTE CONTROL
394075

Remote control for settings Safety laser detector and Presence and Safety laser detector.

485-TCP/IP CONVERTER KIT
P800132

The device allows the insertion within a wired TCP/IP network of devices using an RS-485 serial interface. The solution is used in all those realities where it is necessary to transmit serial data through, for example, a local network already present.

The device allows the insertion within a wired TCP/IP network of devices using an RS-485 serial interface. The solution is used in all those...

Car park management systems
Show

An unexpected error occurred: please reload the page or try again later.