WIND RM

Electric motors for rolling shutters

catalog (PDF)

Electric motors for rolling shutters

230V operators for roller shutters with maximum torque up to 445 Nm. Suitable for mounting on shutters with pulley diameter of 200, 220, 240 and 280mm shaft diameter 42, 48, 60, 76 and 101mm. Available in versions with or without electric brake.

Electric motors for rolling shutters

Main features

Simple and intuitive adjustment of limit switches

Adapters for 42 or 48 (RMB) or 76mm (RMC) shafts included in the pack

Technologies

EE LINK

For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.

Products list

  • Phase Out

Operator for roller shutters with spring shaft pulley diameter 200 mm. Maximum torque 130 Nm and power consumption of 400 W. Reversible.

    Operator for roller shutters with spring shaft pulley diameter 200 mm. Maximum torque 130 Nm and power consumption of 400 W. Release with steel cable and knob for electric brake.

    • Phase Out

    Operator for roller shutters with spring shaft pulley diameter 200 mm. Maximum torque 170 Nm and power consumption of 600 W. Reversible.

      Operator for roller shutters with spring shaft pulley diameter 200 mm. Maximum torque 170 Nm and power consumption of 600 W. Release with steel cable and knob for electric brake.

        Operator for roller shutters with spring shaft pulley diameter 200 mm. Maximum torque 357 Nm and power consumption of 1200 W. Release with steel cable and knob for electric brake.

        • Phase Out

        Operator for roller shutters with spring shaft pulley diameter 240 mm. Maximum torque 235 Nm and power consumption of 600 W. Reversible.

        • Phase Out

        Operator for roller shutters with spring shaft pulley diameter 240 mm. Maximum torque 235 Nm and power consumption of 600 W. Release with steel cable and knob for electric brake.

        • News

        Operator for roller shutters with spring shaft pulley diameter 240 mm. Maximum torque 226 Nm and power consumption of 630 W. Release with steel cable and knob for electric brake.

        • Phase Out

        Operator for roller shutters with spring shaft pulley diameter 240 mm. Maximum torque 445 Nm and power consumption of 1200 W. Release with steel cable and knob for electric brake.

        • News

        Operator for roller shutters with spring shaft pulley diameter 240 mm. Maximum torque 476 Nm and power consumption of 1260 W. Release with steel cable and knob for electric brake.

        Kit

        • Phase Out

        Kit containing operator for roller shutters with spring shaft pulley diameter 200 mm. Maximum torque 130 Nm and power consumption of 400 W. Release with steel cable and knob for electric brake. Control unit, photo cell and warning light, wall-mounted safe for manual release.

        • Phase Out

        Kit containing operator for roller shutters with spring shaft pulley diameter 200 mm. Maximum torque 130 Nm and power consumption of 400 W. Release with steel cable and knob for electric brake. Wall-mounted safe for manual release.

        Accessories

        SHEDIR B CBC 02 L01
        P111515

        Control unit for wired centralisation. For 2 operators (or 2 groups of operators) Application: wire centralisation board for 1 or 2 tubular motors Card power supply: 230 V single-phase Operator power supply: 230V 600W max. each operator Main characteristics: simplified and compact wire centralisation system Functions: control of 1 or 2 motors (or motor units) in single or simultaneous mode, general up/down, motor 1 or unit 1 up/down, motor 2 or unit 2 up/down

        Control unit for wired centralisation. For 2 operators (or 2 groups of operators) Application: wire centralisation board for 1 or 2 tubular...

        COMPACTA A20-180
        P111782

        Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

        CMS
        D831081

        Sign

        BOX
        N574039

        Wall cabinet for release with steel cable and electric control; cable not included

        X EF1
        N999510

        Electric brake for Wind Rmc and Rmb 230V

        An unexpected error occurred: please reload the page or try again later.