Underground hydraulic motors for swing gates

SUB G UL/CSA DX

Product code P930010 00007
  • DIMENSIONAL DIAGRAM
technical design SUB

In-ground 120 V hydraulic operator Non reversing for hinged leaves up to 3.5 m. Manoeuvre time 33 s. Right operator.

PLUS
  • The monoblock structure gives the possibility of a very neat installation that is extremely reliable over time.

  • The closing slowdown guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.

  • Control unit with programming display and new, simplified scenario-based programming

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Technical documentation
Technical Data
Max. weight of door/gate wing 800 kg
Max. width of door/gate wing 3.5 m
Motor voltage 120 v
Type of limit switch Work time
Impact reaction Hydraulic clutch
Slowdown No
U-Link No
Control unit Rigel 6
Board power supply 230 v
Power input 250 w
Maximum angle 180 °
Cycle time 33 s
Locking Open/close hydraulics
Release Non reversing
Frequency of use Very intensive
Protection rating Ip67
Environmental conditions -10 ÷ 60 °c
Imperial measurements

The data shown are for information purposes only.

Max. weight of door/gate wing 1763.696 lbs
Max. width of door/gate wing 11.48294 ft
Motor voltage 120 v
Type of limit switch Work time
Impact reaction Hydraulic clutch
Slowdown No
Control unit Rigel 6
Board power supply 230 v
Power input 250 w
Maximum angle 180 °
Cycle time 33 s
Locking Open/close hydraulics
Release Non reversing
Frequency of use Very intensive
Protection rating Ip67
Environmental conditions 14 ÷ 140 °f
Accessories

Recommended accessories.

  • ALCOR N Cod. D113706 00002 Control panel with dip switches and potentiometers for one or two 230V/300W operators for swing gates. Control panel with dip switches and potentiometers for one or two 230V/300W operators for swing gates.

  • CPS G Cod. N733092 Weight-bearing foundation box for preparation for assembly of SUB G right and left operator. Weight-bearing foundation box for preparation for assembly of SUB G right and left operator.

  • BSC Cod. N728002 Arm for installation of SUB out of the gate axis. Arm for installation of SUB out of the gate axis.

  • ALPHA SD Cod. D113680 00002 Universal control panel with potentiometers for one 230V/500W single-phase operator. Universal control panel with potentiometers for one 230V/500W single-phase operator.

  • CPS SX Cod. N733066 00002 Foundation box designed for fitting the SUB left-hand operator. Foundation box designed for fitting the SUB left-hand operator.

  • CLS/82 Cod. D610256 Triangular release key for SUB operators l=82 mm. Triangular release key for SUB operators l=82 mm.

  • CPS DX Cod. N733066 00001 Foundation box designed for fitting the SUB right-hand operator. Foundation box designed for fitting the SUB right-hand operator.

  • FCS SX Cod. N733066 00004 Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf. Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.

  • FCS DX Cod. N733066 00003 Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf....
    Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.

  • ME Cod. D111013 Control board for 12Vac solenoid lock for 230V automation systems. Control board for 12Vac solenoid lock for 230V automation systems.

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

Continue
Information

An unexpected error occurred: please reload the page or try again later.