Hydraulic pistons for swing gates

LUX MB

Product code P935035 00001
  • DIMENSIONAL DIAGRAM
technical design LUX

Hydraulic operator 230 V for hinged leaves up to 2.3 m and 300 kg in weight. Useful travel 270 mm, manoeuvre time 23 s and maximum opening angle 123 °. Locking system: Hydraulic closing.

PLUS
  • All-aluminium structure with high-resistance anodising treatment.

  • The by-pass valves, in the 230V versions, allow the exact setting of the torque separately and independently for opening and closing.

  • The slowdown during closing (R versions) guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.

Compatible control panel
ALPHA SD
Recommended control panel
ALCOR N
Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Technical Data
Max. weight of door/gate wing 300 kg
Max. width of door/gate wing 2.3 m
Motor voltage 230 v
Type of limit switch Work time
Impact reaction Hydraulic clutch
Slowdown No
U-Link No
Control unit Rigel 6
Power input 250 w
Useful rod stroke 270 mm
Maximum angle 123 °
Cycle time 23 s
Locking Hydraulic closing
Release Triangle key
Frequency of use Very intensive
Protection rating Ip57
Environmental conditions -10 ÷ °c
Imperial measurements

The data shown are for information purposes only.

Max. weight of door/gate wing 661.386 lbs
Max. width of door/gate wing 7.545932 ft
Motor voltage 230 v
Type of limit switch Work time
Impact reaction Hydraulic clutch
Slowdown No
Control unit Rigel 6
Power input 250 w
Useful rod stroke 10.629927 inch
Maximum angle 123 °
Cycle time 23 s
Locking Hydraulic closing
Release Triangle key
Frequency of use Very intensive
Protection rating Ip57
Environmental conditions 14 ÷ 32 °f
Accessories

Recommended accessories.

  • ALCOR N Cod. D113706 00002 Control panel with dip switches and potentiometers for one or two 230V/300W operators for swing gates. Control panel with dip switches and potentiometers for one or two 230V/300W operators for swing gates.

  • NAT Cod. N999131 Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath. Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath.

  • ALPHA SD Cod. D113680 00002 Universal control panel with potentiometers for one 230V/500W single-phase operator. Universal control panel with potentiometers for one 230V/500W single-phase operator.

  • PLE Cod. D730178 Anchor plate for welding the mountings to masonry pillars for LUX, ORO, PHOBOS operators. Anchor plate for welding the mountings to masonry pillars for LUX, ORO, PHOBOS operators.

  • ARB LUX Cod. N733426 Adjustable front and rear bracket for LUX operator. Adjustable front and rear bracket for LUX operator.

  • ARB LUX G Cod. N733474 Adjustable front and rear bracket for LUX G operator. Adjustable front and rear bracket for LUX G operator.

  • CLS Cod. D610180 Triangular release key l=52 mm. Triangular release key l=52 mm.

  • ME Cod. D111013 Control board for 12Vac solenoid lock for 230V automation systems. Control board for 12Vac solenoid lock for 230V automation systems.

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

Continue
Information

An unexpected error occurred: please reload the page or try again later.