ARES BT A

Motors for sliding gates for intensive use

catalog (PDF)

Motors for sliding gates for intensive use

24 V operator for sliding gates weighing up to 1,500 kg, for intensive use. Maximum panel speed up to 12m/min. Torque control thanks to D-Track technology. Electromechanical limit switch. Control unit with trimmer and dip-switch. Residential and commercial use.

Motors for sliding gates for intensive use

Main features

Release lever with personalised key: the release lever simplifies motor release and the personalized key ensures its uniqueness, for better safety

Front screws: this arrangement of the casing screws offers ease and convenience during installation and maintenance, even when there is limited space.

Technologies

24V

A precise, safe and reliable technology Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening. Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles. The efficiency of the technology is a guarantee of the product's reliability.

ER - READY

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

Dynamic Path Tracking

The thrust required to operate safely. A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations. BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor. A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles. The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

EE LINK

For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.

Products list

    Operator 24 V for sliding gates up to 500 kg in weight. Leaf speed 12 m/min.

      Operator 24 V for sliding gates up to 750 kg in weight. Leaf speed 12 m/min.

        Operator 24 V for sliding gates up to 1000 kg in weight. Leaf speed 9 m/min.

          Operator 24 V for sliding gates up to 1000 kg in weight. Leaf speed 9 m/min.

            Operator 24 V for sliding gates up to 1500 kg in weight. Leaf speed 9 m/min.

              Operator 24 V for sliding gates up to 1500 kg in weight. Leaf speed 9 m/min.

              Accessories

              CP
              D221073

              plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots attachment Max. load capacity 600 kg.

              CVZ-S
              N999320

              steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports attachment Max. load capacity 800 kg.

              CVZ
              D571053

              steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw-fitted on supports attachment Max. load capacity 1000 kg.

              CFZ
              D571054

              galvanized steel rack, 4-module, cross-section 22 x 22 mm, length 2 m, welding attachment Max. load capacity 2000 kg.

              SFI
              N999156

              Base plate for ARES and ICARO (supplied with operator)

              SL BAT2
              P125035

              Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.

              THEKE B PRA 01
              P125018

              Metal protection box for ARES and ICARO series sliding operators

              RADIUS LED BT A R1
              D114093 00003

              Flashing light with incorporated antenna for motors with 24 V power supply.

              RADIUS LED BT A R1 W
              D114168 00003

              Flashing light with incorporated antenna for motors with 24 V power supply. White flashing light.

              RADIUS LED BT A R0
              D114094 00003

              Flashing light without incorporated antenna for motors with 24 V power supply.

              COMPACTA A20-180
              P111782

              Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

              An unexpected error occurred: please reload the page or try again later.