Complete kit 24 V for swing gates up to 500 kg in weight and 4 m in length.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.Report a suspicious product or e-partner
The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.
For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
The thrust required to operate safely. A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations. BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor. A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles. The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.
A precise, safe and reliable technology Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening. Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles. The efficiency of the technology is a guarantee of the product's reliability.
|Board power supply||230 V|
|Motor voltage||24 V|
|Power consumption||40 W|
|Max. width of door/gate wing||4 m|
|Max. weight of door/gate wing||500 kg|
|Useful rod stroke||355 mm|
|Maximum angle||126 °|
|Cycle time||17 s|
|Type of limit switch||Magnetic|
|Frequency of use||intensive|
|Environmental conditions||-20 ÷ 55 °C|
KUSTOS BT A40
Irreversible electromechanical operator 24 V for swing gates weighing up to 500 kg and 4 m long.
Control panel with display for one or two 24V electromechanical operators for swing gates
Cod. D113747 00002
Card power supply: 230 V single-phase Operators power supply: 24Vdc 240W max each operator Main features: removable terminal blocks with new standard colour-coding, simplified scenario-based programming with display and incorporated dual channel receiver, D-Track anti-crushing system , slowdown during opening and closing and electronic self-learning Main features: automatic closing, rapid closing, partial opening, operation with deadman feature, direct connection powered solenoid lock and electromagnet, direct connection edge 8K2. Application: display panel for 1 or 2 24V operators Compatibility: LIBRA C MA, LIBRA, LIBRA R, LIBRA MA R
Card power supply: 230 V single-phase Operators power supply: 24Vdc 240W max each operator Main features: removable terminal blocks with new...
ZARA BT L2
Cod. D113796 00002
Control panel with dip switches and potentiometers for one or two 24V operators for swing gates Application: control panel for one or two 24V operators for swing gates Card power supply: 230 V single-phase Operators power supply: 24Vdc 180W max each operator Main functions: automatic re-closing, fast closing, partial opening, deadman feature Compatibility: LIBRA C MA, LIBRA, LIBRA R, LIBRA MA R Main features: removable terminal block with new colour-coding, simplified dip switch programming and built-in two channel receiver, anti-crush system with D-Track technology, slowdown during opening and closing and electronic learning, pedestrian control by remote control only, electronic lock management
Control panel with dip switches and potentiometers for one or two 24V operators for swing gates Application: control panel for one or two...
ARB KUSTOS FRONT
Front adjustable fixing brackets for Kustos BT A
Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7)
Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7)
SFR B - COMPLETE
Cod. N735002 00001
Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7), with flat bracket
SFR-L B - COMPLETE
Cod. N735003 00001
Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7), with flat bracket
Anchor plate for welding the mountings to masonry pillars for LUX, ORO, PHOBOS operators
CABLE N BT
Control unit connecting cable for PHOBOS BT A, KUSTOS BT A. Coil of 100 m, 3x1,5.
Set of backup batteries for THALIA and THALIA P
RADIUS LED BT A R1
Cod. D114093 00003
Flashing light with incorporated antenna for motors with 24 V power supply.
RADIUS LED BT A R1 W
Cod. D114168 00003
Flashing light with incorporated antenna for motors with 24 V power supply. White flashing light.
RADIUS LED BT A R0
Cod. D114094 00003
Flashing light without incorporated antenna for motors with 24 V power supply.
Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.