- DIMENSIONAL DIAGRAM
The thrust required to operate safely.
A smart torque management system based on the microprocessor technology of BFT control units.
Acquiring data from several indicators, it updates the level of thrust required to perform the operation.
D-Track also facilitates the installer in providing for the certifications required by law.
Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.
BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor.
A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles.
The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.
A precise, safe and reliable technology.
Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening.
Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles.
The efficiency of the technology is a guarantee of the product's reliability.
For fast and safe programming.
EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa.
Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated.
Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc.
With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
The new coding system for direct cloning of remote controls.
Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
Low voltage, in-ground irreversible hydraulic operator for hinged leaves up to 2.5 m. weight 800 kg.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.Report a suspicious product or e-partner
|Control unit||THALIA P|
|Board power supply||230 V|
|Motor voltage||24 V|
|Power input||300 W|
|Max. width of door/gate wing||2.5 m|
|Max. weight of door/gate wing||800 kg|
|Maximum angle||120 °|
|Cycle time||13 s|
|Release||Lever or lever with personalised key|
|Frequency of use||very intensive|
|Environmental conditions||-20 ÷ 60 °C|
FCS BT Cod. N733480 00001Foundation box for SUB BT series operators.Foundation box for SUB BT series operators.
SCC Cod. N733392Release for ELI 250N and SUB BT with lever key.Release for ELI 250N and SUB BT with lever key.
SCP Cod. N733502Release for ELI 250 and SUB BT with personalized key.Release for ELI 250 and SUB BT with personalized key.
BBT BAT Cod. P125020Set of backup batteries for THALIA and THALIA P.Set of backup batteries for THALIA and THALIA P.
THALIA Cod. D113745 00002Application: control panel with display for one or two 24V electromechanical operators for swing gates.
Board power supply: 230V...
Application: control panel with display for one or two 24V electromechanical operators for swing gates.
Board power supply: 230V single-phase.
Operators power supply: 24Vdc 180W max each operator.
Main features: new standard colour removable terminal blocks, simplified scenario-based programming with display and integrated dual-channel receiver, D-Track anti-crushing system, slowdown during opening and closing and electronic self-learning.
Main functions: automatic re-closing, fast closing, partial opening, deadman feature.
Compatibility: LIBRA C MA, LIBRA, LIBRA R, LIBRA MA R.