REEL EASY RUA A50 230V R45

Product code P910047 00004

Radio operator for roller shutters. Max shutter weight 88 kg. Max torque 50 Nm and power input 285 W. Shaft rotation speed 12 Rpm

Main features
  • The KIT version comes complete with all accessories for proper installation as well as operators already arranged in the special telescopic roller, able to adapt perfectly the size of the frame with a single action

  • New range complete with 1 to 5-channel PAD radio controls, features a modern design to suit any home context

  • New Shedir compact wire centralisation board: easily installed even in the boxes of roller shutters thanks to its small size, it can control up to two motors or motor units in single or centralised mode.

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
technical design
Control unit Built-In
Motor power supply 230 V
Power consumption 285 W
Outer diameter 60 mm
N° limit switch revolutions 28
Type of end switch Electronic
Locking Mechanical
Frequency of use Residential
Protection rating IP44
Environmental conditions -10 ÷ 40 °C
Interconnectivity no
Release ---
SHEDIR B CBC 02 L01
Cod. P111515

Control unit for wired centralisation. For 2 operators (or 2 groups of operators) Application: wire centralisation board for 1 or 2 tubular motors Card power supply: 230 V single-phase Operator power supply: 230V 600W max. each operator Main characteristics: simplified and compact wire centralisation system Functions: control of 1 or 2 motors (or motor units) in single or simultaneous mode, general up/down, motor 1 or unit 1 up/down, motor 2 or unit 2 up/down

Control unit for wired centralisation. For 2 operators (or 2 groups of operators) Application: wire centralisation board for 1 or 2 tubular...

MIME PAD
Cod. P121028

4-channel wall-mounted radio control with rolling code

MIME TX
Cod. D113831

Two-channel miniaturized 433 Mhz transmitter

ELBA
Cod. D113716 00002

Control panel, max 230V, for roller shutters or roll-up doors Application: control panel for REEL type operator for roller shutters Card power supply: 230 V single-phase Operator power supply: 230V monophase Main features: Extremely compact size for installation in shutter case, programming with potentiometers and dip switches, built-in receiver Main functions: separate open/close, photocells input, possibility of centralised controls, anemometer and twilight sensor management Compatibility: CAPRI, CAPRI RIC, CAPRI TCA

Control panel, max 230V, for roller shutters or roll-up doors Application: control panel for REEL type operator for roller shutters Card...

SCS 1
Cod. P111376

Serial board for connection to zone and opposing leaves for control units with display While stocks last

CREP
Cod. P111183

Twilight sensor

ANEM
Cod. P111182

Anemometric ​​sensor with encoder for wind

SM504
Cod. P130015

Support with bearing for octagonal roller - screw type

SM505
Cod. P130014

Support for octagonal roller - cementing type

SM5014
Cod. N999325

Wall support for operators with square snap pin and split pin for direct coupling, suitable for all operators (from 10Nm to 50Nm).

CAL 60/30
Cod. P130004

Octagonal cover for RUL 60.

CAL 60/100
Cod. P130002

Adjustable telescopic octagonal cover for RUL 60.

RUL 60/3
Cod. P130012

Octagonal shutter winding roller Ø60 mm x 3 m.

RUL 60/6
Cod. P130008

Octagonal shutter winding roller Ø60 mm x 6 m.

BLOCCANTI 40
Cod. P130001

Anti-break-in block for shutters with slats of height 40 mm.

BLOCCANTI 50
Cod. P130013

Anti-break-in block for shutters with slats of height 50 mm.

Timer
Cod. P130024

Weekly programmer for REEL RADIO or external ER-1 receiver

MIME AC
Cod. D113824

433 MHz two-channel indoor receiver 2 independent outputs 230 Vac power supply 30-position memory Operating mode: monostable, bistable, timed, motor control

433 MHz two-channel indoor receiver 2 independent outputs 230 Vac power supply 30-position memory Operating mode: monostable, bistable,...

MITTO B RCB04 R1 CLEAR ICE
Cod. D111947

Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Colour clear ice white. Buttons panel can be customised with own design/logo.

Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Colour clear ice white. Buttons panel can be customised...

MITTO B RCB04 R1
Cod. D111906

Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

MITTO B RCB02 R1
Cod. D111904

Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

ELBA BU
Cod. D113717 00002

Control panel, max 230V, for roller shutters or roll-up doors Application: control panel for one roll-up door operator Card power supply: 230 V single-phase Operator power supply: 230V monophase Main features: Extremely compact size for installation in shutter case, programming with potentiometers and dip switches, built-in receiver, control button on case Main functions: separate open/close, photocells input, possibility of centralised controls, anemometer and twilight sensor management Compatibility: CAPRI, CAPRI RIC, CAPRI TCA

Control panel, max 230V, for roller shutters or roll-up doors Application: control panel for one roll-up door operator Card power supply:...

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.