MAXIMA ULTRA 35

Professional electromechanical barriers

Professional electromechanical barriers

Range of professional 230 Vac electromechanical barriers with speed variator and three-phase induction motor for high frequency of use. Designed and developed to operate in a wide variety of conditions such as large car parks, motorway tollgates with frequent reversing, industrial installations. Three-phase motor with inverter. Oil bath gear motor. Mechanical crankshaft movement (anti-vandalism system) which can deliver fluidity of movement and balance to the bar by also controlling its soft opening and closing. With U-Link protocol for integration with Parking Management or Building Management systems. Possibility of setting the useful passage from electronic control unit

Professional electromechanical barriers

Technologies

Rolling Code

For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.

Inverter

Motor rotation constantly under control The inverter is an electronic device allowing motor rotation speed to be controlled at any moment, ensuring safety and reliability of the installation, and even extending its life. This is because the inverter reduces the stresses on mechanical parts, subjecting them to less stress. The system also allows management of automation opening and closing times.

Inverter with three-phase induction motor

Allows precise control and management of bar/boom speed in a specific range of Bft barriers and also provides excellent dynamic performance in acceleration and slowdown, ensuring extreme quietness.

Reduction unit in oil bath

The device included in a specific range of Bft barriers, offering great durability in being maintenance free; it ensures extreme quietness and irreversibility of movement.

Crank handle system

Together with irreversibility of the reduction unit, this device included in a specific range Bft barriers provides intrinsic anti-vandal protection, preventing unauthorised opening of the gate.

Three-phase induction motor

This device, included in a specific range of Bft barriers, allows the motor to be maintenance-free and offers extreme reliability and quietness. It can also be used in hazardous areas, as it does not produce sparks.

Inductive encoder

A contactless high-resolution device for detecting obstacles. It ensures rapid reversing of motion and improves smoothness of overall movement during acceleration and slowdown.

U-Link

A single communication platform for all types of control units and receivers. The innovative interconnectivity systems developed by Bft along with wireless connection solutions in the field of access point automation become integrated through the new U-link system communication protocol. A technology designed and developed to operate using specific gateways for any type of physical media and communication protocol. To fully facilitate installers in creating the system and in maintenance, Bft can offer solutions based on Bluetooth transmission systems in local and TCP/IP environments for remote connection. U-Link ensures an absolutely stable standard, correct communication, as well as secure data protection thanks to two levels of encryption, offered by the data encryption system and password of the protocol and by the underlying communication system. - U-Link is a technological platform that forms the heart of Bft products - U-link uses an open approach: by changing the B-Eba, Bft proprietary gateway, it is possible to adapt to many different communication languages - U-link is flexible: it can work with or without a network connection, depending on the B-Eba gateway installed - U-Link enables remote maintenance of the products thanks to two-way communication - U-link is scalable: an infinite number of objects can be added to a U-link network - U-Link allows the creation of groups of products: various B-Ebas can be grouped to allow individual or group control of the associated products U-link is an innovation that turns products into Bft solutions.

Products list

    230 V electromechanical barrier with asynchronous three-phase motor and inverter, for controlling from 1,7 to 5,0 m gates. Opening time from 0,7 to 3,0 s with deceleration. Maximum barrier length: 5 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version without spring. Colour RAL 7015.

      230 V electromechanical barrier with asynchronous three-phase motor and inverter, for controlling from 1,7 to 5,0 m gates. Opening time from 0,7 to 3,0 s with deceleration. Maximum barrier length: 5 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version without spring. RAL colour to order.

        230 V electromechanical barrier with asynchronous three-phase motor and inverter, for controlling from 1,7 to 5,0 m gates. Opening time from 0,7 to 3,0 s with deceleration. Maximum barrier length: 5 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Includes fitting of springs and balancing. Excludes barrier and barrier clamp. Includes installation template. Colour RAL 7015.

          230 V electromechanical barrier with asynchronous three-phase motor and inverter, for controlling from 1,7 to 5,0 m gates. Opening time from 0,7 to 3,0 s with deceleration. Maximum barrier length: 5 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Includes fitting of springs and balancing. Excludes barrier and barrier clamp. Includes installation template. RAL colour to order.

            120 V electromechanical barrier with asynchronous three-phase motor and inverter, for controlling from 1,7 to 5,0 m gates. Opening time from 0,7 to 3,0 s with deceleration. Maximum barrier length: 5 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version without spring. Colour RAL 7015.

              120 V electromechanical barrier with asynchronous three-phase motor and inverter, for controlling from 1,7 to 5,0 m gates. Opening time from 0,7 to 3,0 s with deceleration. Maximum barrier length: 5 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version without spring. RAL colour to order.

                230 V Electromechanical barrier with asynchronous three-phase motor and inverter, used for from 1,7 to 5,0 m. Opening time from 0,7 to 3,0 s with Yes deceleration. Maximum barrier length: 5 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version without spring. AISI 304 stainless steel casing

                Accessories

                MLR2.5
                P120056

                Red spring - MAXIMA Utra 35 Ref. spring table

                MLB3
                P120057

                Blue spring - MAXIMA Ultra 35 Ref. spring table

                MLV5
                P120058

                Green spring - MAXIMA Ultra 35 Ref. spring table

                OMEGA ATM U35
                P120062 00001

                Single clamping for ATM bar for MAXIMA ULTRA 35. Bar not included.

                OMEGA ATM FRA U35 IMPACT PROTECTION CONNECTOR
                P120071 00001

                Single clamping for ATM bar for Maxima Ultra 35

                ATM ARTICULATED JOINT + TIE ROD KIT
                P120073

                Kit for 90° articulated bar. Does not include bar, lights and rubber.

                ATM25
                P120102 00001

                Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

                Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

                ATM30
                P120102 00002

                Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

                Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

                ATM40
                P120102 00003

                Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging

                Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

                ATM50
                P120102 00004

                Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

                Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

                ATM30 90°
                P120109 00001

                Articulated barrier with 3 m rise, 90° opening. Does not includes lights and rubber.

                ATM50 90°
                P120109 00002

                Articulated barrier with 5 m rise, 90° opening. Does not includes lights and rubber.

                ATM30 180°
                P120110 00001

                Articulated barrier with 3 m rise, 180° opening. Does not includes lights and rubber.

                ATM50 180°
                P120110 00002

                5 m articulated bar fitted, 180 ° opening. Lights and rubber not included.

                ATM30 90° RG
                P120065 00001

                Articulated bar 90 ° 3 m with lights R/G

                ATM50 90° RG
                P120066 00001

                Articulated bar 90 ° 5 m with lights R/G

                ATM30 180° RG
                P120063 00001

                Articulated bar 180 ° 3 m with lights R/G

                ATM50 180° RG
                P120064 00001

                Articulated bar 180 ° 5 m with lights R/G

                KIT ATM LIGHT 3 R/G 2W
                P120077 00001

                Red-green LED lights kit for fitting on ATM bars up to 3m.

                KIT ATM LIGHT 5 R/G 2W
                P120077 00002

                Red-green LED lights kit for fitting on ATM bars up to 5m.

                PCA ATM 3
                P120053 00001

                Rubber protection (red) for fitting on bar L = 3 m max.

                PCA ATM 5
                P120053 00002

                Rubber protection (red) for fitting on bar L = 5 m max.

                ALLU 2 MAXIMA ULTRA
                P120075

                Power supply for ATM LIGHT Kit on Maxima Ultra

                TP MAXIMA ULTRA
                P120076

                Thermal probe for Maxima Ultra barriers

                EBB KIT ATML
                P120079

                Electric lock for ATML rods to be installed on an FAF UNI R adjustable fork.

                FAF UNI R
                P120080

                Universal adjustable fork for all rods; recommended with installation of FULL SKIRT accessory.

                GA ATM
                P120050

                Adjustable suspended foot, powder coated cataphoresis treated.

                RST ATM
                P120049

                Aluminium rack. Price for 3 metres. Suspended foot not included. Compatible with ATML and ATM model bars.

                SRV DIN
                P120032

                Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply terminals, socket for metal mass detector and standard input/output terminal block

                Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply...

                FCS MAXIMA 5
                P120033

                2 additional limit switches for MAXIMA 30/MAXIMA ULTRA 35

                RME 2
                P111001 00003

                230 V dual channel metal object detector with installation base

                LOOP DETECTOR PRO 230V
                P111786

                Metal object detector, 2 channels, 230VAC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level, boost function for increasing sensitivity, direction of travel management

                Metal object detector, 2 channels, 230VAC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level,...

                RME 1 BT
                P111274

                24 V single channel metal object detector with installation base

                SPIRA 2X1
                D110926 00001

                Magnetic loop 2 x 1 m

                LASER DETECTOR REMOTE CONTROL
                394075

                Remote control for settings Safety laser detector and Presence and Safety laser detector.

                LASER SAFETY SENSOR
                394073

                Safety laser detector. Its used in combination with magnetc loops in order to add an additional safety device (eg: for pedestrian). Includes two relay outputs. Maximum detection range: 5m x 5m.10-35VDC power supply.

                Safety laser detector. Its used in combination with magnetc loops in order to add an additional safety device (eg: for pedestrian). Includes...

                PRESENCE AND SAFETY DETECTOR - LASER LOOPS
                394080

                Presence and Safety laser detector. Its used as an alternative of magnetc loops. Includes one input and two relay outputs. Maximum detection range: 9.9m x 9.9m.10-35VDC power supply.

                Presence and Safety laser detector. Its used as an alternative of magnetc loops. Includes one input and two relay outputs. Maximum detection...

                PALO ø60 H3600
                394160

                Galvanized steel pole support for panels and traffic lights. Diam. 60mm - h 3600mm

                An unexpected error occurred: please reload the page or try again later.