To access your reserved area you must fill out the registration form by following a simple wizard.
After clicking the button below, please enter your details and send the request.
ATTENTION: This operation applies only for the country from where you are registering. To access the Reserved Area from a different country you must do a new registration.
Range of barriers for very intensive use, for clear openings of up to 8 metres.
The wide range of accessories, incorporated flashing light and the arrangement for photocells make them ideal in any context.
New control board Merak BM with U-Link connectivity slot, programming display and two-channel radio receiver incorporated. Mounted in the upper part of the barrier for an easier and convenient access.
IP54 protection level and new design.
Limit switch system with electronic adjustment that speeds up installation and ensures maximum precision in movement.
Backup battery power supply system, installable on-board unit.
For safe transmission.
BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation.
When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once.
The algorithm generated then prevents the reproduction of the code.
A single communication platform for all types of control units and receivers.
The innovative interconnectivity systems developed by Bft along with wireless connection solutions in the field of access point automation become integrated through the new U-link system communication protocol.
A technology designed and developed to operate using specific gateways for any type of physical media and communication protocol.
To fully facilitate installers in creating the system and in maintenance, Bft can offer solutions based on Bluetooth transmission systems in local and TCP/IP environments for remote connection.
U-Link ensures an absolutely stable standard, correct communication, as well as secure data protection thanks to two levels of encryption, offered by the data encryption system and password of the protocol and by the underlying communication system.
- U-Link is a technological platform that forms the heart of Bft products.
- U-link uses an open approach: by changing the B-Eba, Bft proprietary gateway, it is possible to adapt to many different communication languages.
- U-link is flexible: it can work with or without a network connection, depending on the B-Eba gateway installed.
- U-Link enables remote maintenance of the products thanks to two-way communication.
- U-link is scalable: an infinite number of objects can be added to a U-link network.
- U-Link allows the creation of groups of products: various B-Ebas can be grouped to allow individual or group control of the associated products.
U-link is an innovation that turns products into Bft solutions.
For fast and safe programming.
EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa.
Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated.
Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc.
With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
The new coding system for direct cloning of remote controls.
Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
A precise, safe and reliable technology.
Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening.
Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles.
The efficiency of the technology is a guarantee of the product's reliability.
Barrier with 24 V power supply for useful passage up to 6 m and opening time 6 s. Impact reaction via Encoder.
Control unit with ULink slot, display and receiver in head. RAL 7015 grey colour.
Barrier with 24 V power supply for useful passage up to 6 m and opening time 6 s. Impact reaction via Encoder.
Control unit with ULink slot, display and receiver in head. RAL colour on request.
Control unit with ULink slot, display and receiver in head. RAL 7015 grey colour.
Barrier with 24 V power supply for useful passage up to 6 m and opening time 6 s. Impact reaction via Encoder.
Control unit with ULink slot, display and receiver in head. RAL colour on request.
Barrier with 24 V power supply for useful passage up to 6 m and opening time 6 s. Impact reaction via Encoder.
Barrier with 24 V power supply for useful passage up to 8 m and opening time 8 s. Impact reaction via Encoder.
Control unit with ULink slot, display and receiver in head. RAL 7015 grey colour.
Control unit with ULink slot, display and receiver in head. RAL colour on request.
Barrier with 24 V power supply for useful passage up to 8 m and opening time 8 s. Impact reaction via Encoder.
Control unit with ULink slot, display and receiver in head. RAL 7015 grey colour.
Barrier with 24 V power supply for useful passage up to 8 m and opening time 8 s. Impact reaction via Encoder.
Control unit with ULink slot, display and receiver in head. RAL colour on request.
Barrier with 24 V power supply for useful passage up to 8 m and opening time 8 s. Impact reaction via Encoder.
Recommended accessories.
BM Cod. D730964Anchor base for MICHELANGELO series barriers.Anchor base for MICHELANGELO series barriers.
AQ6 Cod. N728022Complete 6 m rectangular boom for MICHELANGELO.Complete 6 m rectangular boom for MICHELANGELO.
AT 704 Cod. N728026First part of telescopic round boom for MICHELANGELO, diam. 70 mm, length 4.3 m.First part of telescopic round boom for MICHELANGELO, diam. 70 mm, length 4.3 m.
AT 706 Cod. N728030Round boom diam. 70 mm length 6.35 m for MICHELANGELO. for openings up to 6 m.Round boom diam. 70 mm length 6.35 m for MICHELANGELO. for openings up to 6 m.
AT 502 Cod. N728028Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 2.6 m.Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 2.6 m.
AT 504 Cod. N728027Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 4.6 m.Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 4.6 m.
OMEGA AQ 6 Cod. N999606Accessories pack for AQ 6 boom.Accessories pack for AQ 6 boom.
OMEGA AT 70 Cod. N999607Accessories pack for AT 704/706.Accessories pack for AT 704/706.
ACC MCL ATT Cod. N999386Accessories pack for ATT 704 / 706 boom.Accessories pack for ATT 704 / 706 boom.
KIT ML MCL40 Cod. P120072Spring kit for conversion from Michelangelo 60 to Michelangelo 40.Spring kit for conversion from Michelangelo 60 to Michelangelo 40.
PCA N3 Cod. P120028 00001Top and bottom rubber cover profile for booms of 3 m max.Top and bottom rubber cover profile for booms of 3 m max.
PCA N4 Cod. P120028 00002Top and bottom rubber cover profile for booms of 4 m max.Top and bottom rubber cover profile for booms of 4 m max.
PCA N5 Cod. P120028 00003Top and bottom rubber cover profile for booms of 5 m max.Top and bottom rubber cover profile for booms of 5 m max.
PCA N6 Cod. P120028 00004Top and bottom rubber cover profile for booms of 6 m max.Top and bottom rubber cover profile for booms of 6 m max.
PCA N8 Cod. P120028 00005Top and bottom rubber cover profile for booms of 8 m max.Top and bottom rubber cover profile for booms of 8 m max.
MCL LAMPO KIT Cod. P120006Integrated flashing light. The MCL CARD KIT is needed for operation.Integrated flashing light. The MCL CARD KIT is needed for operation.
SCHEDA MCL KIT Cod. P120009Control board for KIT MCL LIGHT and KIT MCL LAMPO.Control board for KIT MCL LIGHT and KIT MCL LAMPO.
SB Cod. D573003Aluminium skirt for road barrier booms. Price per linear metre (Calculate length of useful passage minus 40cm).Aluminium skirt for road barrier booms. Price per linear metre (Calculate length of useful passage minus 40cm).
FAF Cod. D730088Fixed rest fork for booms for cementing to ground.Fixed rest fork for booms for cementing to ground.
FAF 2R Cod. P125025
ZFAF2 Cod. P120026Additional anchor plates for cementing FAF2 forks to ground.Additional anchor plates for cementing FAF2 forks to ground.
FAF 2 Cod. P120023Rest fork for booms. For bolting to ground.Rest fork for booms. For bolting to ground.
GA AQ AT Cod. D940008Movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
-.Movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
-.
GAMA AQ AT Cod. D940009Dampened movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
-.Dampened movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
-.
MCL BT A BAT KIT Cod. P125038Set of backup batteries for MICHELANGELO BT A barriers.Set of backup batteries for MICHELANGELO BT A barriers.
SPIRA 2X1 Cod. D110926 00001Magnetic loop 2 x 1 m.Magnetic loop 2 x 1 m.
