PHEBE ULTRA BT A

Product code P915138 00002

Electromechanical operator with built-in control panel for overhead garage doors of maximum surface area 8 m² and Semi intensive use with slowdown. Cycle time 17-20 s, IP44.
Limit switch Mems tecnology.

PLUS
Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies

The thrust required to operate safely.
A smart torque management system based on the microprocessor technology of BFT control units.
Acquiring data from several indicators, it updates the level of thrust required to perform the operation.
D-Track also facilitates the installer in providing for the certifications required by law.
Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.
BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor.
A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles.
The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

A precise, safe and reliable technology.
Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening.
Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles.
The efficiency of the technology is a guarantee of the product's reliability.

The new coding system for direct cloning of remote controls.
Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

technical design PHEBE BT A
Control unit VEGA ULTRA
Nominal voltage 24 V
Power input 40 W
Cycle time 17-20 s
Door surface area 8 m²
Type of limit switch Mems tecnology
Slowdown Yes
Locking Mechanical
Release knob
Impact reaction D-Track
Frequency of use Semi intensive
Protection rating IP44
Environmental conditions -15 ÷ 60 °C
U-Link Yes

VEGA QUADRO QSG Cod. D113836 00002Board power supply: 230V single-phase.
Operators power supply: 24Vdc 168W max each operator.
U-Link technology.
Main characteristics:...
Board power supply: 230V single-phase.
Operators power supply: 24Vdc 168W max each operator.
U-Link technology.
Main characteristics: removable terminal blocks, programming with display and incorporated dual channel receiver, anti-crushing, slowdown during opening and closing and electronic self-learning.
Main functions: automatic re-closing, fast closing, pulse blocking, blocking hold.
Compatibility: HYDRA, HYDRA R.
Version for external panel, not compatible with operators already equipped with card on board motor.

CTBP Cod. N733299Pack of 1800 mm drive tubes and fixing bases for completing the PHEBE N KIT.Pack of 1800 mm drive tubes and fixing bases for completing the PHEBE N KIT.

BCP Cod. D412377Short welding base for PHEBE series operators (L 578 mm).Short welding base for PHEBE series operators (L 578 mm).

BLP Cod. N733288Long welding base for PHEBE series operators (L 1600 mm).Long welding base for PHEBE series operators (L 1600 mm).

CTA Cod. N7331202 square drive tubes of cross section 20x20 mm and length 1800 mm for PHEBE N series operators.2 square drive tubes of cross section 20x20 mm and length 1800 mm for PHEBE N series operators.

CTA2 Cod. N7331292 square drive tubes of cross section 20x20 mm and length 200 mm for PHEBE N series operators.2 square drive tubes of cross section 20x20 mm and length 200 mm for PHEBE N series operators.

CBA Cod. N733112Straight telescopic arms for the installation of PHEBE series operators on overhead door.Straight telescopic arms for the installation of PHEBE series operators on overhead door.

CBAS Cod. N733119Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1000 mm.Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1000 mm.

CBASL Cod. N733113Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1500 mm.Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1500 mm.

CBAC Cod. N733114Curved telescopic arms for the installation of PHEBE series operators on overhead door.Curved telescopic arms for the installation of PHEBE series operators on overhead door.

CBAC-G Cod. N733221Curved telescopic arms for installation of PHEBE BT A series operators on up-and-over doors.Curved telescopic arms for installation of PHEBE BT A series operators on up-and-over doors.

SM1 Cod. P115005External manual release for overhead garage door (1 operator).External manual release for overhead garage door (1 operator).

SM2 Cod. P115001External manual release for overhead garage door (2 operators).External manual release for overhead garage door (2 operators).

BT BAT1 Cod. P125007Emergency battery kit for HYDRA N CPEL, only for external board not compatible with board on motor.Emergency battery kit for HYDRA N CPEL, only for external board not compatible with board on motor.

KABP Cod. P125042Battery adapter wiring kit necessary for PHEBE BT A with built-in control unit and for BBT BAT.Battery adapter wiring kit necessary for PHEBE BT A with built-in control unit and for BBT BAT.

BBT BAT Cod. P125020Set of backup batteries for THALIA and THALIA P.Set of backup batteries for THALIA and THALIA P.

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.