PHEBE ULTRA BT A SQ

Product code P915138 00003
  • DIMENSIONAL DIAGRAM
technical design PHEBE BT A
Technologies
  • The thrust required to operate safely.
    A smart torque management system based on the microprocessor technology of BFT control units.
    Acquiring data from several indicators, it updates the level of thrust required to perform the operation.
    D-Track also facilitates the installer in providing for the certifications required by law.
    Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.
    BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor.
    A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles.
    The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

  • A precise, safe and reliable technology.
    Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening.
    Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles.
    The efficiency of the technology is a guarantee of the product's reliability.

Operator for overhead garage doors of maximum surface area 8 m² and Semi intensive use. Cycle time 17-20 s, IP44.
Limit switch Mems tecnology.

PLUS
Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Technical documentation
Technical Data
Type of limit switch Mems tecnology
Impact reaction D-track
Slowdown Yes
U-Link No
Control unit Vega ultra
Power input 40 w
Cycle time 17-20 s
Locking Mechanical
Release Knob
Frequency of use Semi intensive
Protection rating Ip44
Environmental conditions -15 ÷ 60 °c
Door surface area 8 m²
Nominal voltage 24 v
Accessories

Recommended accessories.

  • SM2 Cod. P115001 External manual release for overhead garage door (2 operators). External manual release for overhead garage door (2 operators).

  • BLP Cod. N733288 Long welding base for PHEBE series operators (L 1600 mm). Long welding base for PHEBE series operators (L 1600 mm).

  • CBASL Cod. N733113 Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1500 mm. Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1500 mm.

  • BT BAT1 Cod. P125007 Emergency battery kit for HYDRA N CPEL, only for external board not compatible with board on motor. Emergency battery kit for HYDRA N CPEL, only for external board not compatible with board on motor.

  • SM1 Cod. P115005 External manual release for overhead garage door (1 operator). External manual release for overhead garage door (1 operator).

  • VEGA QUADRO QSG Cod. D113836 00002 Vega control board in CPEL panel.
    Application: control panel for one or two overhead garage door operators.
    Vega control board in CPEL panel.
    Application: control panel for one or two overhead garage door operators.

  • CBAC-G Cod. N733221 Curved telescopic arms for installation of PHEBE BT A series operators on up-and-over doors. Curved telescopic arms for installation of PHEBE BT A series operators on up-and-over doors.

  • BCP Cod. D412377 Short welding base for PHEBE series operators (L 578 mm). Short welding base for PHEBE series operators (L 578 mm).

  • CBAS Cod. N733119 Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1000 mm. Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1000 mm.

  • CTA2 Cod. N733129 2 square drive tubes of cross section 20x20 mm and length 200 mm for PHEBE N series operators. 2 square drive tubes of cross section 20x20 mm and length 200 mm for PHEBE N series operators.

  • CBAC Cod. N733114 Curved telescopic arms for the installation of PHEBE series operators on overhead door. Curved telescopic arms for the installation of PHEBE series operators on overhead door.

  • BBT BAT Cod. P125020 Set of backup batteries for THALIA and THALIA P. Set of backup batteries for THALIA and THALIA P.

  • CTA Cod. N733120 2 square drive tubes of cross section 20x20 mm and length 1800 mm for PHEBE N series operators. 2 square drive tubes of cross section 20x20 mm and length 1800 mm for PHEBE N series operators.

  • KABP Cod. P125042 Battery adapter wiring kit necessary for PHEBE BT A with built-in control unit and for BBT BAT. Battery adapter wiring kit necessary for PHEBE BT A with built-in control unit and for BBT BAT.

  • CBA Cod. N733112 Straight telescopic arms for the installation of PHEBE series operators on overhead door. Straight telescopic arms for the installation of PHEBE series operators on overhead door.

  • CTBP Cod. N733299 Pack of 1800 mm drive tubes and fixing bases for completing the PHEBE N KIT. Pack of 1800 mm drive tubes and fixing bases for completing the PHEBE N KIT.

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

Continue
Information

An unexpected error occurred: please reload the page or try again later.