Automatic barriers for car parks and driveways of up to 8 metres

MICHELANGELO BT A 80 U 120 RAL

Product code P940077 00101
  • DIMENSIONAL DIAGRAM
technical design MICHELANGELO BT A
Technologies
  • The new coding system for direct cloning of remote controls.
    Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
    In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
    Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

  • A precise, safe and reliable technology.
    Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening.
    Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles.
    The efficiency of the technology is a guarantee of the product's reliability.

  • For safe transmission.
    BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation.
    When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once.
    The algorithm generated then prevents the reproduction of the code.

Control unit with ULink slot, display and receiver in head. RAL colour on request.
Barrier with 24 V power supply for useful passage up to 8 m and opening time 8 s. Impact reaction via Encoder.

PLUS
  • New control board Merak BM with U-Link connectivity slot, programming display and two-channel radio receiver incorporated. Mounted in the upper part of the barrier for an easier and convenient access.

  • IP54 protection level and new design.

  • Limit switch system with electronic adjustment that speeds up installation and ensures maximum precision in movement.

  • Backup battery power supply system, installable on-board unit.

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Technical documentation
Technical Data
Type of limit switch Electronic
Impact reaction Encoder
Slowdown Yes
U-Link Yes
Control unit Merak bm
Power input 300 w
Locking Mechanical
Release Key
Frequency of use Intensive
Protection rating Ip54
Environmental conditions 50 °c
Motor power supply 24 v
Useful passage 8 m
Accessories

Recommended accessories.

  • ACC MCL ATT Cod. N999386 Accessories pack for ATT 704 / 706 ACC MCL ATT boom. Accessories pack for ATT 704 / 706 ACC MCL ATT boom.

  • OMEGA AT 70 Cod. N999607 Accessories pack for AT 704/706. Accessories pack for AT 704/706.

  • MCL LIGHT KIT Cod. P120005 00001 Light kit (6 lights) for boom. For use in conjunction with PCA. The MCL CARD KIT is necessary for operation. Light kit (6 lights) for boom. For use in conjunction with PCA. The MCL CARD KIT is necessary for operation.

  • SPIRA 2X1 Cod. D110926 00001 Magnetic loop 2 x 1 m. Magnetic loop 2 x 1 m.

  • SCHEDA MCL KIT Cod. P120009 Control board for KIT MCL LIGHT and KIT MCL LAMPO. Control board for KIT MCL LIGHT and KIT MCL LAMPO.

  • AT 502 Cod. N728028 Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 2.6 m. Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 2.6 m.

  • THERMO Cod. P120018 Thermostatically controlled heating element for use of GIOTTO BT A, MOOVI, MICHELANGELO BT A barriers to ambient temperatures of -40°C. Thermostatically controlled heating element for use of GIOTTO BT A, MOOVI, MICHELANGELO BT A barriers to ambient temperatures of -40°C.

  • PCA N4 Cod. P120028 00002 Top and bottom rubber cover profile for booms of 4 m max. Top and bottom rubber cover profile for booms of 4 m max.

  • VENTIMIGLIA NS Cod. P111401 00001 Infrared device for BIR C or BAR C safety edges (conforms to EN 12978 Standard). Infrared device for BIR C or BAR C safety edges (conforms to EN 12978 Standard).

  • FAF 2 Cod. P120023 Rest fork for booms. For bolting to ground. Rest fork for booms. For bolting to ground.

  • AQ6 Cod. N728022 Complete 6 m rectangular boom for MICHELANGELO. Complete 6 m rectangular boom for MICHELANGELO.

  • MCL LAMPO KIT Cod. P120006 Integrated flashing light. The MCL CARD KIT is needed for operation. Integrated flashing light. The MCL CARD KIT is needed for operation.

  • FAF 2R Cod. P125025

  • BIR C Cod. N190104 Rubber safety edge (H 30 mm), price per m. Rubber safety edge (H 30 mm), price per m.

  • GAMA AQ AT Cod. D940009 Dampened movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
    -.
    Dampened movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
    -.

  • PCA N3 Cod. P120028 00001 Top and bottom rubber cover profile for booms of 3 m max. Top and bottom rubber cover profile for booms of 3 m max.

  • PCA N5 Cod. P120028 00003 Top and bottom rubber cover profile for booms of 5 m max. Top and bottom rubber cover profile for booms of 5 m max.

  • AT 706 Cod. N728030 Round boom diam. 70 mm length 6.35 m for MICHELANGELO. for openings up to 6 m. Round boom diam. 70 mm length 6.35 m for MICHELANGELO. for openings up to 6 m.

  • BM Cod. D730964 adjustable base plate for mod. MICHELANGELO - BM. adjustable base plate for mod. MICHELANGELO - BM.

  • RME 2 Cod. P111001 00003 230 V dual channel metal object detector with installation base. 230 V dual channel metal object detector with installation base.

  • GA AQ AT Cod. D940008 Movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
    -.
    Movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
    -.

  • ZFAF2 Cod. P120026 Additional anchor plates for cementing FAF2 forks to ground. Additional anchor plates for cementing FAF2 forks to ground.

  • SB Cod. D573003 Aluminium skirt for road barrier booms. Price per linear metre (Calculate length of useful passage minus 40cm). Aluminium skirt for road barrier booms. Price per linear metre (Calculate length of useful passage minus 40cm).

  • AT 704 Cod. N728026 Round boom ø 70 mm, length 4.3 m. for clear spaces up to 4 m ATT 704. Round boom ø 70 mm, length 4.3 m. for clear spaces up to 4 m ATT 704.

  • PCA N6 Cod. P120028 00004 Top and bottom rubber cover profile for booms of 6 m max. Top and bottom rubber cover profile for booms of 6 m max.

  • MCL BT A BAT KIT Cod. P125038 Set of backup batteries for MICHELANGELO BT A barriers. Set of backup batteries for MICHELANGELO BT A barriers.

  • OMEGA AQ 6 Cod. N999606 Accessories pack for AQ 6 boom. Accessories pack for AQ 6 boom.

  • FAF Cod. D730088 Fixed rest fork for booms for cementing to ground. Fixed rest fork for booms for cementing to ground.

  • PCA N8 Cod. P120028 00005 Top and bottom rubber cover profile for booms of 8 m max. Top and bottom rubber cover profile for booms of 8 m max.

  • AT 504 Cod. N728027 Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 4.6 m. Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 4.6 m.

  • KIT ML MCL40 Cod. P120072 Spring kit for conversion from Michelangelo 60 to Michelangelo 40. Spring kit for conversion from Michelangelo 60 to Michelangelo 40.

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

Continue
Information

An unexpected error occurred: please reload the page or try again later.