IGEA

Product code P935065 00002

Electromechanical operator 230 V for swing gates up to 250 kg in weight and 2.5 m in length.

Main features
  • Aluminium structure with high-resistance paint treatment.

  • Built-in, adjustable, single-cable electromechanical limit switch system.

  • Control unit with programming display, automatic setting menu, simplified programming and virtual encoder.

Recommendation

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

technical design
Control unit RIGEL 6
Board power supply 230 V
Motor voltage 230 V
Power consumption 300 W
Max. width of door/gate wing 2.5 m
Max. weight of door/gate wing 250 kg
Maximum angle 125 °
Cycle time 15 s
Type of limit switch Electromechanical
Slowdown no
Locking Mechanical
Release Knob operated with personal key
Impact reaction Electronic clutch
Frequency of use intensive
Protection rating IP44
Environmental conditions -15 ÷ 60 °C
Interconnectivity no
ALENA SW2
D113811 00004

Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operators power supply: 230V single-phase 400W max each operator Main features: programming of trimmer and dip-switch, removable terminal block with standard colouring, integrated radio receiver, remote controlled pedestrian opening. Soft opening and closing (only with electromechanical motor), management of resistive safety edges 8K2/contact, management of verified safety devices, management of electronic locks, electronic control of motor torque (only with electromechanical motor), pressure surge when opening. Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics Compatibility: ALTAIR and ARIES

Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operators power supply: 230V...

ALENA SW2 120V
D113811 00003

Control panel with dip switches and potentiometers for one or two 120V 400W+400W, operators for swing gates and industrial folding doors Application: control panel for one or two operators for swing gates Board power supply: 120V single-phase Operator power supply: 230 V single-phase, max. 400W per operator Main features: programming of trimmer and dip-switch, removable terminal block with standard colouring, integrated radio receiver, remote controlled pedestrian opening. Soft opening and closing (only with electromechanical motor), management of resistive safety edges 8K2/contact, management of verified safety devices, management of electronic locks, electronic control of motor torque (only with electromechanical motor), pressure surge when opening. Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics Compatibility: ALTAIR and ARIES

Control panel with dip switches and potentiometers for one or two 120V 400W+400W, operators for swing gates and industrial folding doors...

RADIUS LED AC A R1
D114093 00002

Flashing light with incorporated antenna for motors with 230 V power supply.

RADIUS LED AC A R0
D114094 00002

Flashing light without incorporated antenna for motors with 230 V power supply.

RCA
N733421

Lever release with steel cable, length 3.5 m. Compatible with BOX.

RCAL
N733422

Lever release with steel cable, length 7 m. Compatible with BOX.

LRV
P135005

Short articulated arms for IGEA and IGEA BT

BOX
N574039

Wall cabinet for release with steel cable and electric control; cable not included

An unexpected error occurred: please reload the page or try again later.