HIDE SW KIT

Product code R930138 00002

Complete kit 24 V for swing gates up to 150 kg in weight and 2 m in length.

Main features
  • Its cylindrical shape of maximum outside diameter 80mm allows it to be installed rapidly in the jamb of the leaf. The pre-wiring enables fast, user-friendly electrical connection to the control unit.

  • Hide SW is able to withstand the most severe weather conditions and wind, allowing operation even of solid gates equal to 3m² at up to 120 km/h (class 2, EN13241).

  • The LIBRA CB HIDE control unit is able to optimize the operator functions, allowing separate management of the motors in the times for working, torque control and slowing down, calibrating to the actual needs thanks to the built-in "D-Track" function.

Recommendation

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies

The thrust required to operate safely. A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations. BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor. A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles. The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

A precise, safe and reliable technology Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening. Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles. The efficiency of the technology is a guarantee of the product's reliability.

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

technical design
Control unit LIBRA CB HIDE
Board power supply 230 V
Motor voltage 24 V
Power consumption 40 W
Max. width of door/gate wing 2 m
Max. weight of door/gate wing 150 kg
Maximum angle 110 °
Cycle time 12 s
Type of limit switch Absolute encoder
Slowdown Yes
Locking Electromechanical
Release Steel cable
Impact reaction D-Track
Frequency of use intensive
Protection rating IP45
Environmental conditions -20 ÷ 60 °C
Interconnectivity no
Motor and kit for the automation of swing gates, totally concealed
HIDE SW

Disappearing irreversible electromechanical operator 24 V for swing gates weighing up to 150 kg and 2 m long.

Automatic gates photocells
DESME A15

Pair of self-aligning photocells. Range 30 m. Power supply 24 V ac/dc.

Warning lights for gates, 24volt or 230 volt
RADIUS B LTA 24 R1

Flashing light with incorporated antenna for motors with power supply 24 V.

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R1

Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

LIBRA CB HIDE

Control panel with display for 1 or 2 HIDE SW series operators

RADIUS LED BT A R1 W
D114168 00003

Flashing light with incorporated antenna for motors with 24 V power supply. White flashing light.

RADIUS LED BT A R0
D114094 00003

Flashing light without incorporated antenna for motors with 24 V power supply.

HIDE HINGE SUP
N999526

Top hinge for the installation of HIDE SW series operator

HIDE HINGE INF
N999524

Bottom fixed hinge for the installation of HIDE SW series operator

BOX
N574039

Wall cabinet for release with steel cable and electric control; cable not included

BT BAT
P125005

Back-up battery kit for HYDRA N, ARGO, VENERE BT A DIS

Swinging gates
Electromechanical automation systems for swinging gates
Show

An unexpected error occurred: please reload the page or try again later.