REEL EASY B10 230V W45
Product code P910052 00001Wired operator for roller shutters. Max shutter weight 18 kg. max torque 10 nm and power input 125 W. Shaft rotation speed 16 Rpm.
PLUS
The KIT version comes complete with all accessories for proper installation as well as operators already arranged in the special telescopic roller, able to adapt perfectly the size of the frame with a single action
New range complete with 1 to 5-channel PAD radio controls, features a modern design to suit any home context
New Shedir compact wire centralisation board: easily installed even in the boxes of roller shutters thanks to its small size, it can control up to two motors or motor units in single or centralised mode.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partner
| Control unit | ELBA |
| Motor power supply | 230 V |
| Power input | 125 W |
| Outer diameter | 60 mm |
| N° limit switch revolutions | 28 |
| Type of end switch | Mechanical |
| Locking | Mechanical |
| Frequency of use | Residential |
| Protection rating | IP44 |
| Environmental conditions | -10 ÷ 40 °C |
| U-Link | no |
SHEDIR B CBC 02 L01 Cod. P111515Control unit for wired centralisation. For 2 operators (or 2 groups of operators).
Application: wire centralisation board for 1 or 2 tubular...
Control unit for wired centralisation. For 2 operators (or 2 groups of operators).
Application: wire centralisation board for 1 or 2 tubular motors.
Board power supply: 230V single-phase.
Operator power supply: 230V 600W max. each operator.
Main characteristics: simplified and compact wire centralisation system.
Functions: control of 1 or 2 motors (or motor units) in single or simultaneous mode, general up/down, motor 1 or unit 1 up/down, motor 2 or unit 2 up/down.
ELBA Cod. D113716 00002Control panel, max 230V, for roller shutters or roll-up doors.
Application: control panel for REEL type operator for roller shutters.
Board...
Control panel, max 230V, for roller shutters or roll-up doors.
Application: control panel for REEL type operator for roller shutters.
Board power supply: 230V single-phase.
Operator power supply: 230V monophase.
Main features: Extremely compact size for installation in shutter case, programming with potentiometers and dip switches, built-in receiver.
Main functions: separate open/close, photocells input, possibility of centralised controls, anemometer and twilight sensor management.
Compatibility: CAPRI, CAPRI RIC, CAPRI TCA.
CREP Cod. P111183Twilight sensor.Twilight sensor.
ANEM Cod. P111182Anemometric sensor with encoder for wind.Anemometric sensor with encoder for wind.
AD 5027 Cod. N999323Drive wheel and limit switch adapter for RUL60.Drive wheel and limit switch adapter for RUL60.
AD5028 Cod. N999327Octagonal adapter Ø70 mm zamak.Octagonal adapter Ø70 mm zamak.
AD5029 Cod. N999348Round adapter Ø63x1.5 mm.Round adapter Ø63x1.5 mm.
AD5030 Cod. N999349Deprat LP62 adapter.Deprat LP62 adapter.
AD5031 Cod. N999350Deprat LP89 adapter.Deprat LP89 adapter.
AD5032 Cod. N999351ZF 64 adapter.ZF 64 adapter.
AD5034 Cod. N999395ZF 54 adapter.ZF 54 adapter.
AD5035 Cod. N999396Ogive adapter Ø78 mm.Ogive adapter Ø78 mm.
AD5036 Cod. N999397Octagonal adapter 60 PL.Octagonal adapter 60 PL.
AD5037 Cod. N999546Plastic ogive adapter Ø70 mm.Plastic ogive adapter Ø70 mm.
AD5038 Cod. N999547Metallic ogive adapter Ø70 mm.Metallic ogive adapter Ø70 mm.
SM504 Cod. P130015Support with bearing for octagonal roller - screw type.Support with bearing for octagonal roller - screw type.
SM505 Cod. P130014Support for octagonal roller - cementing type.Support for octagonal roller - cementing type.
SM5013 Cod. N999324Wall-mounted orientable support for operators with manual release.Wall-mounted orientable support for operators with manual release.
SM5014 Cod. N999325Wall support for operators with square snap pin and split pin for direct coupling, suitable for all operators (from 10Nm to 50Nm).Wall support for operators with square snap pin and split pin for direct coupling, suitable for all operators (from 10Nm to 50Nm).
SM5015 Cod. N999326Wall-mounted two-position orientable support for operators with manual release.Wall-mounted two-position orientable support for operators with manual release.
CAL 60/30 Cod. P130004Octagonal cover for RUL 60.Octagonal cover for RUL 60.
CAL 60/100 Cod. P130002Adjustable telescopic octagonal cover for RUL 60.Adjustable telescopic octagonal cover for RUL 60.
RUL 60/1,5 Cod. P130010Octagonal shutter winding roller Ø60 mm x 1.5 m.Octagonal shutter winding roller Ø60 mm x 1.5 m.
RUL 60/3 Cod. P130012Octagonal shutter winding roller Ø60 mm x 3 m.Octagonal shutter winding roller Ø60 mm x 3 m.
RUL 60/6 Cod. P130008Octagonal shutter winding roller Ø60 mm x 6 m.Octagonal shutter winding roller Ø60 mm x 6 m.
BLOCCANTI 40 Cod. P130001Anti-break-in block for shutters with slats of height 40 mm.Anti-break-in block for shutters with slats of height 40 mm.
BLOCCANTI 50 Cod. P130013Anti-break-in block for shutters with slats of height 50 mm.Anti-break-in block for shutters with slats of height 50 mm.
MM8 Cod. N999328Manual operation eye-ring.Manual operation eye-ring.
MM9 Cod. N99932945 ° universal joint for manual operation.45 ° universal joint for manual operation.
MM10 Cod. N99933090 ° universal joint for manual operation.90 ° universal joint for manual operation.
MM11 Cod. N9993311.5 m articulated boom with hook for manual operation.1.5 m articulated boom with hook for manual operation.
MM12 Cod. N9993321.5 m rigid boom with hook for manual operation.1.5 m rigid boom with hook for manual operation.
Pad Rcd 01 F Cod. D111911Wall-mounted remote control 1 channel for radio tubes.Wall-mounted remote control 1 channel for radio tubes.
Pad Rcd 01 R Cod. D1119091-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver.1-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver.
Pad Rcd 05 R Cod. D1119105-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver.5-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver.
MIME AC Cod. D113824433 MHz two-channel indoor receiver 2 independent outputs 230 Vac power supply 30-position memory Operating mode: monostable, bistable,...
433 MHz two-channel indoor receiver 2 independent outputs 230 Vac power supply 30-position memory Operating mode: monostable, bistable, timed, motor control.
MIME PAD Cod. P1210284-channel wall-mounted radio control with rolling code.4-channel wall-mounted radio control with rolling code.
MIME TX Cod. D113831two-channel miniaturized 433 Mhz transmitter.two-channel miniaturized 433 Mhz transmitter.
ELBA BU Cod. D113717 00002Control panel, max 230V, for roller shutters or roll-up doors.
Application: control panel for one roll-up door operator.
Board power supply:...
Control panel, max 230V, for roller shutters or roll-up doors.
Application: control panel for one roll-up door operator.
Board power supply: 230V single-phase.
Operator power supply: 230V monophase.
Main features: Extremely compact size for installation in shutter case, programming with potentiometers and dip switches, built-in receiver, control button on case.
Main functions: separate open/close, photocells input, possibility of centralised controls, anemometer and twilight sensor management.
Compatibility: CAPRI, CAPRI RIC, CAPRI TCA.
