GIOTTO BT A 60 U 230V50

Product code P940080 00002

Barrier with 24 V motor power supply for clear opening up to 6 m and opening time 5 s. Impact resistance by means of Encoder. Grey RAL 7015

Main features
  • Backup battery power supply system, installable on-board unit.

  • Limit switch system with electronic adjustment that speeds up installation and ensures maximum precision in movement.

  • Control unit located in an easily accessible position and separate from the mechanical part

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies

A precise, safe and reliable technology Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening. Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles. The efficiency of the technology is a guarantee of the product's reliability.

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.

technical design
Control unit MERAK BG
Power consumption 250 W
Motor power supply 24 V
Type of limit switch Electronic
Slowdown Yes
Locking Mechanical
Release Personal key
Impact reaction Encoder
Frequency of use intensive
Protection rating IP54
Environmental conditions -20/(-40 with THERMO heater) ÷ 55 °F
Interconnectivity Yes
CBO
Cod. D730251

Anchor base for MOOVI and GIOTTO series barriers

AQ3
Cod. N728033

Complete 3 metre rectangular boom for GIOTTO and MOOVI

AQ5
Cod. N728034

Complete 5 metre rectangular boom for GIOTTO and MOOVI

OMEGA AQ
Cod. N999507

Pack of accessories for installation of 3/5 m rectangular boom for MOOVI/GIOTTO

AT3
Cod. N728031

Complete 3 metre round boom for MOOVI/GIOTTO

AT5
Cod. N728032

Complete 5 metre round boom for MOOVI/GIOTTO

AT6
Cod. N728038

Complete 6 metre round boom for MOOVI/GIOTTO

OMEGA AT
Cod. N999513

Pack of accessories for installation of 3/6 m round boom for MOOVI/GIOTTO

FAF 2
Cod. P120023

Rest fork for booms. For bolting to ground.

ACTR
Cod. N999608

Pack of 12 additional reflective labels (1 pack already included with each boom)

ART 90 Q
Cod. N728051

90 ° articulated joint for Moovi and Giotto booms. Max 4m clear passage.

SB
Cod. D573003

Aluminium skirt for road barrier booms. Price per linear metre (Calculate length of useful passage minus 40cm)

KIT LIGHT
Cod. P120001 00001

Lights on boom 3 - 4.5 m

KIT LIGHT1
Cod. P120001 00002

Lights for booms over 4.5 m

PCA N3
Cod. P120028 00001

Top and bottom rubber cover profile for booms of 3 m max.

PCA N4
Cod. P120028 00002

Top and bottom rubber cover profile for booms of 4 m max.

PCA N5
Cod. P120028 00003

Top and bottom rubber cover profile for booms of 5 m max.

PCA N6
Cod. P120028 00004

Top and bottom rubber cover profile for booms of 6 m max.

ZFAF2
Cod. P120026

Additional anchor plates for cementing FAF2 forks to ground.

FAF 2R
Cod. P125025

GAM
Cod. D940007

Mobile rest leg for BGV barrier boom (not usable on BGV 30)

GA AQ AT
Cod. D940008

Movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers) -

GAMA AQ AT
Cod. D940009

Dampened movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers) -

BIR C
Cod. N190104

Rubber safety edge (H 30 mm), price per m

VENTIMIGLIA NS
Cod. P111401 00001

Infrared device for BIR C or BAR C safety edges (conforms to EN 12978 Standard)

GIOTTO M BG BAT KIT
Cod. P120074

Buffer battery kit for Giotto BT A series barrier

THERMO
Cod. P120018

Thermostatically controlled heating element for use of GIOTTO BT A, MOOVI, MICHELANGELO BT A barriers to ambient temperatures of -40°C

RME 2
Cod. P111001 00003

230 V dual channel metal object detector with installation base

RME 1 BT
Cod. P111274

24 V single channel metal object detector with installation base

SPIRA 2X1
Cod. D110926 00001

Magnetic loop 2 x 1 m

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.